GoPro Hero3 Silver User Manual
Have a look at the manual GoPro Hero3 Silver User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 54 GoPro manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 59
59
caMera asse MblY
PreVentinG WAter DAmAGe to Your CAmerA
The rubber seal that lines the camera housing forms a waterproof barrier that
protects your HERO3 in wet and underwater conditions. Keep the camera housing’s
rubber seal clean; a single hair or grain of sand can cause a leak.
After every use in salt water you will need to rinse the outside of the housing \
with non-salt water and dry. Not doing this can eventually cause corrosion of the
hinge pin and salt buildup in the seal, which can cause...](http://img.usermanuals.tech/thumb/2179/55833/w64_hero3_silver_user-manual-58.png "Page 59
59
caMera asse MblY
PreVentinG WAter DAmAGe to Your CAmerA
The rubber seal that lines the camera housing forms a waterproof barrier that
protects your HERO3 in wet and underwater conditions. Keep the camera housing’s
rubber seal clean; a single hair or grain of sand can cause a leak.
After every use in salt water you will need to rinse the outside of the housing \
with non-salt water and dry. Not doing this can eventually cause corrosion of the
hinge pin and salt buildup in the seal, which can cause...")
61 caMera asse MblY Att AChinG ADhesiVe mounts Pro tiPs: Apply to clean surface only. Wax, oil, dirt or other debris will reduce adhesion, which can result in a weak bond and risk of losing camera should connection fail. Attach mount in room temperature conditions. Mount’s adhesive will not bond properly if applied in cold or damp environments to cold or damp surfaces, or if the surface is not room temperature. Adhesive mounts should only be mounted to smooth surfaces; porous or textured surfaces will not enable a proper bond. When applying mount, firmly press into place and ensure full contact over entire surface. For best results, attach the mount a minimum of 24 hours prior to use. ▶See gopro.com/support for more information on mounts. Locking Plug Using the HERO3 in high impact sports such as surfing or skiing where significant impact may occur? Use the special locking plug which securely locks the attachment buckle fingers into place--helping prevent accidental housing release from the mount. The circular ring fits over the thumbscrew and acts as a leash to prevent dropping or losing the locking plug.
62 cU sto Mer s UPPort GoPro is dedicated to providing the best possible service. To reach the GoPro Customer Support Team, visit gopro.com/support.