GoPro Hero Plus Lcd User Manual

4041
PHOTO SETTINGS 
For instructions on changing settings, see Navigating Settings Menus  
(page 19).
IN T E R VA L
This setting applies only to Time Lapse  mode. Inter val determines the 
amount of time that passes between each captured frame. Available 
inter vals for Time Lapse range from 0.5 seconds (default) to 60 
seconds.
Interval Examples
0.5-2 seconds Sur fing, biking, or other spor t
2 seconds Busy street corner
5-10 seconds Sunset
10-60 seconds Lengthy activities, such as construction...

4243
/ Setup Mode
In Setup  mode, you can change settings that apply to all camera 
modes. For instructions on how to change the following settings,   
see  Navigating Settings Menus  (page 19).
WIRELESS
When wireless is on, a wireless status icon appears on the  
camera status screen and touch display and the blue wireless  
lights blink intermittently. 
Setting  Description
Off (default)
GoPro App Camera connects to the GoPro App. For 
instructions on connecting to this app, see 
Connecting to the...

4445
/ Setup Mode
ORIENTATION
This setting eliminates the need to flip your video during editing when 
the camera is mounted upside down. 
Setting Description
Up (default)    
Camera is used right-side up.
Down    
Camera is used upside down.
/ Setup Mode
QUIKCAPTURE
With QuikCapture, you can quickly turn your camera on and begin 
capturing video or Time Lapse photos. The options for this setting are 
On and Off (default).
Note: You cannot start QuikCapture with the GoPro remote or the GoPro App.
To...

4647
/ Setup Mode
LEDS
This setting determines which camera status lights (red) to activate. 
The options for this setting are Both on (front and back), Both off, Front 
on, or Rear on. The default setting is Both on.
BEEPS
You can set the sound indicator to On (default) or Off.
VIDEO FORMAT
The Video Format setting governs frame rates for recording and 
playback when viewing video on a T V/HDT V. 
Setting Description
NTSC (default) Viewing video on an NTSC T V/HDT V (most 
televisions in Nor th...

4849
/ Important Messages
MICROSD CARD MESSAGES
NO SDNo card present. The camera requires a 
microSD, microSDHC, or microSDXC card 
(sold separately) to capture videos and photos.
FULL Card is full. Delete files or swap card.
SD ERR Camera is unable to read card formatting. 
Reformat the card in the camera.
PRO TIP:  Reformat your microSD card on a regular basis to ensure 
that the card remains in good condition.
/ Important Messages
FILE REPAIR ICON
If your last video file was corrupted during...

5051
/ Camera Housing
SWAPPING BACKDOORS 
You can switch the backdoor of your HERO+ LCD to suit your activity 
and shooting conditions.
To Change the Backdoor: 1.  Open the backdoor of the housing so that it hangs downwards.
2.  Firmly pull the backdoor downwards until it snaps free from the 
main housing.
3.  Line up the replacement backdoor into the hinge opening.
4.  Push upwards on the backdoor until it clicks into place.
Slim housing surfboard mount installation
Slim housing remove camera
Slim...

5253
/ Using the Mounts
ATTACHING YOUR CAMERA TO MOUNTS 
To attach your HERO+ LCD camera to a mount, you need a 
Mounting Buckle and/or thumb screw, depending on the mount you 
are using. For more information on mounts, visit gopro.com .
Slim housing surfboard mount installation
Slim housing remove camera
Slim housing insert camera
Slim housing closedSwapping housing doors
Quick Release Buckle + Thumb Screw + Slim housing = Complete Unit
Mounting Buckle
Thumb Screw CameraComplete Unit
USING CURVED + FLAT...

5455
/ Using the Mounts
LOCKING PLUG 
If you are using HERO+ LCD in spor ts such as sur fing or skiing, use the 
locking plug to securely lock the Mounting Buckle fingers into place.  
To Attach the Locking Plug: 1.  Loop the circular ring over the thumbscrew. The circular ring   
acts as a leash to prevent dropping or losing the locking plug.
2.  Slide the Mounting Buckle into the mount until it clicks   
into place.
3.  Press the U-shaped par t of the plug into the U-shaped space in   
the Mounting...

5657
BATTERY STORAGE AND HANDLING 
The camera contains sensitive components, including the battery. 
Avoid exposing your camera to ver y cold or ver y hot temperatures. 
Low or high temperature conditions may temporarily shor ten the 
batter y life or cause the camera to temporarily stop working properly. 
Avoid dramatic changes in temperature or humidity when using the 
camera, as condensation may form on or within the camera.
The integrated camera housing protects the camera and batter y from 
water...

5859
/ Troubleshooting
• Playing a high bitrate HD video file over a low bandwidth USB 
connection. Transfer the file to the computer to play back.
If your computer does not meet the minimum requirements,   
make sure that all other programs on your computer are closed.
I FORGOT MY CAMERA’S USERNAME OR PASSWORD  
See  Resetting Your Camera's Wireless Name and Password  
(page 43).
I POWERED OFF MY GOPRO, BUT THE BLUE LIGHT IS   
STILL BLINKING  
The blue light indicates that wireless is on. To turn...