Motorola Gm360 User Manual

							39
English
UTILITIES
SCAN
You can monitor several channels in order to
receive any call that is transmitted on any of
these channels. Sixteen different channels can
be programmed into each scan list. Each
channel can share the same scan list or have
different scan lists assigned to them.
Once the radio’s scan operation is activated
and the radio detects a call coming through a
channel in its scan list, it switches to that
channel for you to receive the call.
STARTING OR STOPPING SCAN
You can start or stop a scan operation by using
a pre-programmedScanbutton or via the
menu, either when the radio is in the IDLE
STATEorwheninacall.Using the Scan Button
1.
Press theScanbutton to start scanning. The
scan start alert tone will sound
and the display icon
G
lit .
2.
Press theScanbutton again to stop scanning.
Thescanstopalerttone will
sound and the display icon
G
is
extinguished
. 
						

							40
English
UTILITIES
Using the MenuThe scan start alert tone will sound, the display
iconGwill be lit and the LED indicator will
blink green during a scan operation. When a
call on a channel is detected the LED will stop
blinking and the channel number will be
displayed.
PRIORITY CHANNEL
A scan list may contain a priority channel. This
means that a particular channel (for example, a
commonly used channel) may be checked
more frequently than other channels in the list
during a scan operation. Priority channels are
programmed into your radio scan lists by your
dealer, however when a priority channel is
included in a scan list, the scan icon changes
fromGtoH.
TALKBACK
If the programmable Talkback option is set, you
can respond to any calls received during the
scan operation by pressing the PTT button
before the programmed hang-time ends. Check
with your dealer for details.1EnsureradioisinIDLESTATE,orinacall.
2
c
to enter Menu Mode.
3
+
or
e
until:
4
c
to select
5
+
or
e
until:
6
c
to select
Display shows
current status e.g. :
7
+
or
e
until:
8
c
to select
Display shows:
(for 2 seconds)
9
Radio exits menu
mode and display
shows e.g.:
UtilitiesScanOffOnSelectedChan: 05 
						

							41
English
UTILITIES
DELETING A NUISANCE CHANNEL
If a channel continually generates unwanted calls/
noise (a “nuisance” channel), you can temporarily
remove it from the scan list by performing a
Nuisance Channel Deleteoperation:
1.While the radio is on the Nuisance Chan-
nel, press and hold theNuisance Delete
button until you hear the scan star t alert
tone.
2.Release theNuisance Deletebutton.Note:You cannot perform a Nuisance Channel Delete
on a priority channel or if there is only one
remainingchannelinthescanlist.
ADDING A DELETED NUISANCE CHANNEL
BACK INTO THE SCAN LIST
Using the Scan Button
1.Press theScanbutton to stop scanning.
The scan stop alert tone will sound.
2.Press theScanbutton again to re-start
scanning. The scan start alert tone will
sound, and the scan list will contain all
programmed channels.
Using the Menu
1.Follow the instructions for selectingScan
On/Offvia the menu
2.SelectScan Off. Your radio will stop scan-
ning, the scan stop alert tone will sound,
the display iconGand the LED indicator
will be extinguished.
3.SelectScan On. Your radio will re-start
scanning, the scan start alert tone will
sound, the display iconGwill be lit , the
LED indicator will blink green and the scan
list will contain all programmed channels. 
						

							42
English
UTILITIES
CALL FORWARD
You can call forward calls to your radio to
another radio if you are unable to take calls or
are away from your radio.
Yo u c a n s w i t c hOnorOffCall Forward by
using a pre-programmedCall Forwardbutton
or via the menu.
Using the Call Forward Button
1.
Press theCall Forwardbutton to switchon
Call Forward, when the feature enable alert
will sound and the display will show
:
2.
Press theCall Forwardbutton again to switch
offCall Forward when the feature disable alert
will sound and the display will show
:Using the Menu
Forwarded OnForwarded Off1EnsureradioisinIDLESTATE.
2
c
to enter Menu Mode.
3
+
or
e
until:
4
c
to select
5
+
or
e
until:
6
c
to select
Display shows
current status e.g. :
7
+
or
e
until:
8
c
to select
Display shows:
(for 2 seconds)
9
Radio exits menu and returns to IDLE STATE
UtilitiesCall ForwardOffOnSelected 
						

							43
English
UTILITIES
TALKAROUND
In your communications network, you may be using
a system to cover a larger area than is possible with
your radio. However, you can communicate with
another radio within your radio’s range without
going through the system by using the Talkaround
feature. This is especially useful when the system is
down.
Yo u c a n s w i t c hOnorOffTalkaround by using
a pre-programmedTalkaroundbutton or via
the menu.
Using the Talkaround Button
1.
Press theTalkaroundbutton to switchon
Talkaround when the feature enable alert will
sound, the display icon
J
is lit and the display
will show
:
2.
Press theTalkaroundbutton again to switch
offTalkaround when the feature disable alert
will sound, the display icon
J
is extinguished
and the display will show
:Using the Menu
Talkaround OnTalkaround Off1EnsureradioisinIDLESTATE.
2
c
to enter Menu Mode.
3
+
or
e
until:
4
c
to select
5
+
or
e
until:
6
c
to select
Display shows
current status e.g. :
7
+
or
e
until:
8
c
to select
Display shows:
(for 2 seconds)
9
Radio exits menu
mode and display
shows e.g.:
UtilitiesTalkaroundOffOnSelectedChan: 05 
						

							44
English
UTILITIES
EXTERNAL ALARM
The external alarm feature activates the
vehicle horn and/or lights to inform you of an
incoming call when you are away from your
vehicle.
Yo u c a n s w i t c hOnorOffExternal Alarm by
using a pre-programmedExternal Alarm
button or via the menu.
When the alarm is activated it can be cancelled by:1.Answering the call.
2.The external alarm timer times out.Using the External Alarm Button
1.
Press the
External Alarm
button to switch
External Alarm
on, when the feature enable
alert will sound, the display icon
K
is lit and
the display will show
:
2.
Press the
External Alarm
button again to
switch
External Alarm
off, when the feature
disable alert will sound, the display icon
K
is
extinguished and the display will show
:Using the Menu
Ext Alarm  OnExt Alarm Off1EnsureradioisinIDLESTATE.
2
c
to enter Menu Mode.
3
+
or
e
until:
4
c
to select
5
+
or
e
until:
6
c
to select
Display shows
current status e.g. :
7
+
or
e
until:
8
c
to select
Display shows:
(for 2 seconds)
9
Radio exits menu
mode and display
shows e.g.:
UtilitiesExternal AlarmOffOnSelectedChan: 05 
						

							45
English
UTILITIES
LONE WORKER
The Lone Worker feature enables you to work
alone with added safety.
Yo u c a n s w i t c hOnorOffLone Worker by
using a pre-programmedLone Workerbutton
or via the menu.
Using the Lone Worker Button1.Press theLone Workerbutton to switch Lone
Wor keron, when the feature enable alert will
sound and the display will show:
 If you have not pressed any buttons within a pro-
grammedtime,youwillberemindedthatLone
Workeris switchedonby a high pitched alert
tone (Lone Worker Reminder) being sounded.
Pressany buttonto respond and cancel the
alert, if you donotthe radio will enter the
Emergency state.
2.Press theLone Workerbutton again to switch
Lone Workeroff, when the feature disable alert
will sound and the display will show:
3.You may also switch off Lone Worker by chang-
ing the channel or switching radiooffandon
again.
Using the Menu
Lone Wkr OnLone Wkr Off1EnsureradioisinIDLESTATE.
2
c
to enter Menu Mode.
3
+
or
e
until:
4
c
to select
5
+
or
e
until:
6
c
to select
Display shows
current status e.g. :
7
+
or
e
until:
8
c
to select
Display shows:
(for 2 seconds)
9
Radio exits menu
mode and display
shows e.g.:
UtilitiesLone WorkerOffOnSelectedChan: 05 
						

							46
English
UTILITIES
POWER LEVEL
You can transmit your calls at different transmit
power levels. A higher level means you can
reach a radio that is farther away. A lower power
level reduces the possibility of interference. Use
thehighpowersettingonlywhennecessary.
You can switch betweenhighandlowpower
levels by using a pre-programmedPower
Levelbutton or via the menu.
Using the Power Level Button
1.
Press thePower Levelbutton to switch tohigh
powerwhen the feature enable alert will
sound, the display icon
His lit and the display
will show
:
2.
Press thePower Levelbutton again to switch
tolow powerwhen the feature disable alert
will sound, the display icon
Lis lit and the dis-
play will show
:Using the Menu
High PowerLow Power1EnsureradioisinIDLESTATE.
2
c
to enter Menu Mode.
3
+
or
e
until:
4
c
to select
5
+
or
e
until:
6
c
to select
Display shows
current status e.g. :
7
+
or
e
until:
8
c
to select
Display shows:
(for 2 seconds)
9
Radio exits menu
mode and display
shows e.g.:
UtilitiesPower LevelLowHighSelectedChan: 05 
						

							47
English
UTILITIES
COMPANDING
Companding is a collective term to define
compressing the audio signal on transmission
and expandingthe audio signal on reception.
The overall effect is to reduce noise in the
received signal, giving you crisper, clearer
audio clarity. Companding should only be used
when other radios in your system have the
same companding feature available.
Yo u c a n s w i t c hOnorOffCompanding by
using a pre-programmedCompandingbutton
or via the menu.
Using the Companding Button
1.
Press theCompandingbutton to switch Com-
pandingon, when the feature enable alert will
sound, the display iconAis lit and the
display will show
:
2.
Press theCompandingbutton again to switch
Compandingoff, when the feature disable alert
will sound, the display iconAextinguished
and the display will show
:Using the Menu
Companding OnCompanding Off1EnsureradioisinIDLESTATE.
2
c
to enter Menu Mode.
3
+
or
e
until:
4
c
to select
5
+
or
e
until:
6
c
to select
Display shows
current status e.g. :
7
+
or
e
until:
8
c
to select
Display shows:
(for 2 seconds)
9
Radio exits menu
mode and display
shows e.g.:
UtilitiesCompandingOffOnSelectedChan: 05 
						

							48
English
UTILITIES
BACKLIGHT
Backlight illuminates the radio display and
menu navigation keys.
Your radio can be programmed to have the
backlight permanently on, permanently off or a
timed period, when any new information being
displayed causes the backlight to remain on for
10 seconds.
Yo u c a n s w i t c hOnorOffthe Backlight by
using a pre-programmedBacklightbutton or
via the menu.
Using the Backlight Button
1.
Press theBacklightbutton to switch
Backlighton, when the feature enable alert will
sound and the display will show
:
2.
Press theBacklightbutton again to switch
Backlightoff, when the feature disable alert
will sound and the display will show
:Using the Menu
or
Backlight Tmd
Backlight On
Backlight Off1EnsureradioisinIDLESTATE.
2
c
to enter Menu Mode.
3
+
or
e
until:
4
c
to select
5
+
or
e
until:
6
c
to select
Display shows
current status e.g. :
7
+
or
e
until:
or
 
8
c
to select e.g.:
Display shows:
(for 2 seconds)
9
Radio exits menu
mode and display
shows e.g.:
UtilitiesBacklightOffOnTimedTimedSelectedChan: 05