Motorola Gm360 User Manual

19
English
RADIO CALLS
Once the desired address is displayed, there are
two methods to select the address:
Method 1
Method 2
Press the PTT buttonorCall 1-4 to select address
and make the call.
Call 1-4 are pre-programmed call buttons.
Note:During a call you may enter the contact list
as described above and make another call to
a third party, or initiate a new call. In either
case the call may be a voice or status call.
Keypad Edit
(Keypad Microphone)If the radio is displaying a Contact List number, a...

20
English
RADIO CALLS
MISSED CALLS
If a call remains unanswered, the call will be
stored by the radio, provided that Missed Calls
has been programmed into your radio.
Up to ten calls can be stored. If the same radio
calls more than once, only the most recent call
is stored. When ten calls have been stored by
the radio, depending on the radio
programming, the eleventh call received may
overwrite the first or not be stored by the radio.
Whenanewcallhasbeenstoredbytheradio,
the Missed Call iconQwill flash...

21
English
RADIO CALLS
Example: You can call back to any number in the Missed
Call list by:1 Display shows
If the displays shows S there is a status message
associated with the call.
f
Displays message e.g.
f
again
Displays status number
e.g.
f
again
Display shows
Reception  SOn BreakStatus 04Reception  S1
+
or
e
until
desired number is
displayed:
2PTT buttonorc
or
#
to make the call.
3
After the call is set-up, press PTT button and
talk with your mouth 2.5-5 cm from
microphone. Release PTT to listen....

22
English
RADIO CALLS
On a successful call set- up, the entry is
automatically deleted from the stack together
with any associated status message.
Unanswered calls may be deleted from the
Missed Call list at any time by :On deletion of the last message in the Missed
Calls list, the radio will exit the menu and return
to the IDLE STATE.
ToexittheMissedCallList:
Note:The calls in the list are not deleted when the
radio is turned off. 1
c
to enter Menu Mode.
2
Display shows:
3
c
to select
4
+
or
e
to...

23
English
RADIO CALLS
STATUS CALLS
A status is a code for transmitting prearranged
messages, e.g. status “05” may indicate
“Return to Base”. The prearranged messages
and associated code digits are contained in a
Status List which contains up to 255 entries.
This list is used for both incoming calls, when
the status of the calling radio is displayed, and
outgoing calls, when your status is sent either
to a requesting radio or to other radios.
Making a Status Call
When the radio is in the IDLE state or...

24
English
RADIO CALLS
Once the desired status is displayed, there are two
methods to select the status:
Method 1
Method 2
Press the PTT buttonorCall 1-4 to select and make
the call. Call 1-4 are pre-programmed call buttons.
Note:During a call you may enter the status list as
described above and make another status
call to a third party or initiate a new status
call.
To send status message to another radio, select
radio Alias/ID from Contact List via menu and send
as detailed.
Receiving a Status Call...

25
English
RADIO CALLS
EMERGENCY CALL
Your radio can be programmed to give you a
one-button quick access to call a particular
radio or centre (predefined by your dealer) in
emergency situations. This is theEmergency
Call.
When you make an Emergency call, your radio
goes into an Emergency state, which can be
programmed to:
 continually receive speech,
 the radio can receive and transmit.
1.Press theEmergencybutton to initiate an
Emergency call.
2.Emergency can be stopped by:
 Switching the...

26
English
RADIO CALLS
DTMF
(Keypad Microphone only)DTMF means Dual Tone Multi Frequency and is
used when the radio is required to operate in a radio
system with an interface to telephone systems.
There are two methods of accessing DTMF Live
Dial Mode:Automatic/ManualTo do this, your radio must send a telephone
interconnect to a station that connects you to a
phone line. After you have finished your call, the
radio sends a clear down call (if programmed) to
shutdown the connection to the phone line....

27
English
RADIO CALLS
To initiate a DTMF call with Manually
Dialled Telephone Interconnect Call
Note:The radio starts a programmable timer the
moment both parties stop transmitting
(talking). If the time-out timer expires, the
radio will end the phone call. 5To end the call press the Monitor Button or
change channel when the clear down call is
sent automatically from your radio to shutdown
the phone line.
1Enter the interconnect call from the keypad
microphone, you will hear a tone sequence....

28
English
RADIO CALLS
Permanent DTMF ModePress the pre-programmed DTMF button once, to
put the keypad microphone into permanent DTMF
live dial mode. Press the DTMF button again to
disable the DTMF live dial. The radio then returns to
theIDLESTATEandselectcallscanbemade.
Alternatively, use the DTMF menu option to enable
or disable permanent DTMF Mode.
Note:Permanent DTMF mode is not available in
scan or during a call.Using the DTMF Button
1.
Press theDTMFbutton to switchonpermanent
DTMF Mode when the...