Global Garden Products Blower BL620B Instructions Manual

71501071/0Realizzazione: EDIPROM / bergamo
GGP ITALY 
SPA
Via del Lavoro, 6
I-31033 Castelfranco Veneto (TV) ITALY
Soffiatore - MANUALE DI ISTRUZIONI
A TTENZIONE! - Prima di utilizzare la macchina, leggere attentamente
il presente manuale .
Blower - OPERATOR’S MANUAL
WARNING!
Read this manual carefully before using the machine.
Souffleur - MANUEL D’UTILISATION
A TTENTION! - Avant d’utiliser la machine, lire attentivement le présent
manuel.
Gebläse - GEBRAUCHSANWEISUNG
ACHTUNG! - Bevor man die Maschine...

EN1 1. For Safe Operation
EXPLANATION OF SYMBOLS AND SAFETY
WARNINGS
Read owner’s manual before operat-
ing this machine.
Wear head, eye and ear protection.
Warning / Attention
Keep all children, bystanders and helpers 15
meters away from the machine.
Never modify your machine. We won’t warrant
the machine, if you use the remodeled blower or
if you don’t observe the proper usage written in
the manual.
WARNING!!!
RISK OF DAMAGING HEARING
IN NORMAL CONDITIONS OF USE,
THIS MACHINE MAY INVOLVE A DAILY
LEVEL...

SAFETY FIRST
Certain paragraphs in the manual contain particu-
larly significant information and are marked with
various levels of highlighting with the following
meaning:
or    
These give details or further
information on what has already been indicated,
and aim to prevent both damage to the machine,
and the machine from causing damage.
Non-observance will result
in the risk of injury to oneself or others.
Non-observance will result
in the risk of serious injury or death to oneself
or others
1. Read...

serious or fatal injury, persons
with pacemaker should consult
their physician and the pacemak-
er manufacturer before operating
this tool.
WORKING CIRCUMSTANCE
1.To reduce the risk of injury asso-
ciated with exhaust fume inhalat i
on, do not operate in unventilated
area. The exhaust gases contain
harmful carbon monoxide.
2.Avoid using the blower where sta-
ble footing and balance are not
assured.
AVOID NOISE PROBLEM
Check and fol-
low the local regulations as to sound
level and hours of operations for...

ing attachments. Do not operate
without net in place. Always dis-
connect the spark plug before
performing maintenance or
accessing movable parts.
USING THE PRODUCT
1.Check the work area that the
blower will be used in and remove
or cover all valuables that may be
damaged by the air blast or
thrown debris.
2.To reduce the risk of injury asso-
ciated with thrown objects.
a)Watch out for children, pets,
open windows or freshly washed
cars, and blow debris safely
away.
b)Use the full blower nozzle
extension...

2. Symbols on the machine / 3. Parts location and Set up5EN
For safe operation and
maintenance, symbols are carved in relief on
the machine. According to these indications,
please be careful not to make a mistake.
!WARNING!
PARTS LOCATION
SET UP
•BLOWER TUBES
1. Connect the blower and swivel joint with the
flexible hose. Clamp both ends of the flexible
hose securely with the hardware attached to
the unit.
2. Align the protrusion and the groove provided
on the tube ends and twist the tube until con-...

•The engines are lubricated by oil specially for-
mulated for air-cooled 2-cycle gasoline engine
use. Use an anti-oxidant added quality oil
expressly labeled for air-cooled 2-cycle engine
use (JASO FC GRADE OIL or ISO EGC
GRADE).
•Do not use BIA or TCW (2-stroke water-cool-
ing type) mixed oil.
•RECOMMENDED MIXING RATIO GASO-
LINE 50: OIL 1
•Exhaust emission are controlled by the funda-
mental engine parameters and components • FUEL
Gasoline is very flamma-
ble. Avoid smoking or bringing any flame or...

(eq., carburation, ignition timing and port tim-
ing) without addition of any major hardware or
the introduction of an inert material during
combustion.
•These engines are certified to operate on
unleaded gasoline.
•Make sure to use gasoline with a minimum
octane number of 89RON (USA/Canada:
87AL).
•If you use a gasoline of a lower octane value
than prescribed, there is a danger that the
engine temperature may rise and an engine
problem such as piston seizing may conse-
quently occur.
•Unleaded gasoline...

EN5. Operating the Engine8 8
STARTING ENGINE
Avoid operating the blower
with the flexible tube and swivel joint discon-
nected. That would cut down the engine cooling
air so that the engine could be damaged by over-
heat.
1. Push the primer bulb until fuel flows out in the
clear tube.
2. When the engine is cool, close the choke.
3. Set the stop switch(a) to the I position. Set
the throttle lever to the start position(1-2-3),
then start the engine following the procedure
described in 4.
4. To start, hold...

EN6. Maintenance and Storage9
Make sure that the engine
has stopped and is cool before performing
any service to the blower. Contact with rotat-
ing blower fan or hot muffler may result in a
personal injury.
•CLEANING AIR FILTER:
Check the air cleaner every
25 hours of use or more frequently if used under
dusty conditions. A clogged air filter may
increase fuel consumption while cutting down
the engine power. Never operate the blower
without the air filter or with a deformed filter ele-
ment because...