Gigabyte X99 Gaming 5 Manual

- 91 -
5-2-1 EasyTune
GIGABYTE's	EasyTune	 is	a	 simple	 and	easy-to-use	 interface	that	allows 	users	 to	fine-tune	 their	system	 settings 	
or do overclock/overvoltage in Windows environment. 
The EasyTune Interface
Tabs InformationTa bDescription
The Smart Quick Boost tab provides you with different levels of CPU frequency to choose to 
achieve desired system performance. After making changes, be sure to restart your system 
for these changes to take effect.
The Advanced CPU OC tab allows you to...

- 92 -
5-2-2 System Information Viewer
GIGABYTE System Information Viewer allows you to monitor and adjust the fan speed in the operating sy\
stem. 
You can also display the hardware monitor information on the desktop to v\
iew the system status at any time.
The System Information Viewer Interface
Tabs InformationTa bDescription
The System Information tab provides information on the installed CPU and motherboard 
and the BIOS version. 
The Smart Fan Auto tab allows you to specify a Smart Fan mode.
The...

- 93 -
5-2-3 EZ Setup
The	GIGABYTE	 EZ	Setup	 utility	includes	 the	following	 'EZ'	setups	 applications	 that	will	offer	 greatly	 simplified	
install	and	configuration	procedures:	Disk	Mode	Switch,	EZ	Smart	Response,	and	XHD.
Disk Mode Switch
Disk Mode Switch allows you to switch the operating mode for your hard d\
rive even after it's been installed with 
an operating system. Supported operating modes include IDE, AHCI, and RAID. You can select a disk mode 
and restart your computer after...

- 94 -
EZ Smart Response
A. System Requirements
1. An Intel® Chipset-based motherboard supporting this feature
2. Intel® Core series processor
3. Intel® SATA controllers set to RAID mode
4. Intel® Rapid Storage Technology utility installed	(Note	1)
5. A conventional SATA disk and an SSD	(Note	2)
6. Windows 7 with SP1/Windows 8/Windows 8.1	(Note	3)
B. Using EZ Smart Response
Select EZ Smart Response and click Create.
To disable this function, click Delete.
If	you	 have	 installed	 the	operating	 system...

- 95 -
XHD
With GIGABYTE XHD	(Note	 1),	users	 can	quickly	 configure	 a	RAID-ready	 system	for	RAID	 0	or	 RAID	 1	when	 a	
new SATA drive is added. All with a simple click of a button, XHD helps to enhance your hard drive read/write 
performance	without	the	need	for	complex	and	time-consuming	configurations.
A. System Requirements
1. An Intel® Chipset motherboard supporting RAID
2. Intel® SATA controllers set to RAID mode
3. Intel® Rapid Storage Technology utility installed
4. Windows 7 with...

- 96 -
5-2-4 Fast Boot
Through the simple GIGABYTE Fast Boot	(Note	 1) interface, you can enable or change the Fast Boot or Next Boot 
After AC Power Loss setting right in the operating system.
The Fast Boot Interface
Using Fast Boot
 •BIOS Fast Boot:
 This option is the same as the Fast Boot option	(Note	 2) in BIOS Setup. It allows you to enable or disable the 
fast boot function to shorten OS boot time.
 •AC OFF Mode: 
 This option is the same as the Next Boot After AC Power Loss option	(Note	 2) in...

- 97 -
5-2-5 Smart TimeLock
GIGABYTE Smart TimeLock allows you to effectively manage computer or Internet usage time with simple 
rules and options.
The Smart TimeLock Interface
Using Smart TimeLock
Click the lock icon  on the bottom left corner and enter the password	(Note). Set the time when a user can or 
cannot use your computer for weekdays and weekends. The Lock Mode on the bottom right corner allows you 
to	 choose	 to	turn	 off	the	 computer	 or	only	 close	 the	Internet	 connection	 during	the...

- 98 -
5-2-6 Smart Recovery 2
Smart	Recovery	 2	allows	 you	to	back	 up	a	partition	 as	an	 image	 file	every	 hour.	You	can	use	these	 images	 to	
restore	your	system	or	files	when	needed.
 •Smart	Recovery	2	only	supports	NTFS	file	system. •You need to select the destination partition in Settings	the	 first	 time	you use Smart Recovery 2. •The Backup Now button will be available only after you log in Windows for ten minutes. •Select the Always run on next reboot checkbox to automatically enable Smart...

- 99 -
Recovering your system with Smart Recovery 2:
Steps:
1. Click the System Recovery button on the main menu.
2. Select the location where your backup is saved.
3. Use the time slider to select a time point.
4. Select a partition backup created on the selected time point and 
click Restore.
5. Confirm	whether	 to	restart	 your	system	 to	proceed	 with	the	restore	
immediately or later. Once you respond "Yes" the system will restart to 
the Windows recovery environment. Follow the onscreen...

- 100 -
5-2-7 USB Blocker
GIGABYTE USB Blocker provides you with an easy-to-use interface that allows you to bl\
ock certain USB device 
types on your PC. Devices classes that are blocked will be ignored by th\
e operating system.
The USB Blocker Interface
Using USB Blocker
Select the class of USB device that you would like to block or unblocked\
. Double left-click to change the Blocked 
or Unblocked status and click OK. Then enter your password and click OK to complete.
Unique Features