GIGABYTE Gak8vm800m User Manual

BIOS Setup - 31 -
EnglishCapacity Capacity of currently installed hard disk.
Hard drive information should be labeled on the outside drive casing.  Enter the appropriate option
based on this information.
Cylinder Number of cylinders
Head Number of heads
Precomp Write precomp
Landing Zone Landing zone
Sector Number of sectors
Drive A / Drive B
The category identifies the types of floppy disk drive A or drive B that has been installed in the
computer.
None No floppy drive installed
360K, 5.25 5.25 inch...

GA-K8VM800M Motherboard - 32 -
English
2-2 Advanced BIOS Features
Hard Disk Boot Priority
Select boot sequence for onboard(or add-on cards) SCSI, RAID, etc.
Use <
> or  to select a device, then press to move it up, or  to move it down the list. Press
 to exit this menu.
First / Second / Third Boot Device
Floppy Select your boot device priority by Floppy.
LS120 Select your boot device priority by LS120.
Hard Disk Select your boot device priority by Hard Disk.
CDROM Select your boot device priority by...

BIOS Setup - 33 -
English2-3 Integrated Peripherals
IDE DMA transfer access
EnabledEnable IDE DMA transfer access. (Default value)
Disabled Disable this function.
On-Chip IDE Channel0
Enabled Enable onboard 1st channel IDE port. (Default value)
Disabled Disable onboard 1st channel IDE port.
On-Chip IDE Channel1
Enabled Enable onboard 2nd channel IDE port. (Default value)
Disabled Disable onboard 2nd channel IDE port.
CMOS Setup Utility-Copyright (C) 1984-2005 Award Software
Integrated Peripherals
IDE DMA...

GA-K8VM800M Motherboard - 34 -
English
OnChip Serial ATA
Enabled Enable VT8237R Serial ATA supported. (Default value)
Disabled Disable VT8237R Serial ATA supported.
SATA Mode
RAID Set onboard SATA mode to RAID. (Default value)
IDE Set onboard SATA mode to IDE.
AC97 Audio
Auto Enable onboard AC97 audio function. (Default value)
Disabled Disable this function.
VIA Onboard LAN
Enabled Enable VIA onboard LAN function. (Default value)
Disabled Disable this function.
USB 1.1 Controller
Disabled Disable USB 1.1...

BIOS Setup - 35 -
EnglishOnboard Serial Port 2
Auto BIOS will automatically set up the  Serial port 2 address.
3F8/IRQ4 Enable onboard Serial port 2 and address is 3F8/IRQ4.
2F8/IRQ3 Enable onboard Serial port 2 and address is 2F8/IRQ3. (Default value)
3E8/IRQ4 Enable onboard Serial port 2 and address is 3E8/IRQ4.
2E8/IRQ3 Enable onboard Serial port 2 and address is 2E8/IRQ3.
Disabled Disable onboard Serial port 2.
UART Mode Select
This item allows you to determine which Infra Red(IR) function of Onboard...

GA-K8VM800M Motherboard - 36 -
English
2-4 Power Management Setup
ACPI Suspend Type
S1(POS) Set ACPI suspend type to S1/POS(Power On Suspend). (Default value)
S3(STR) Set ACPI suspend type to S3/STR(Suspend To RAM).
USB Device Wake-Up From S3
Disabled Disable USB Device Wake-Up from S3. (Default value)
Enabled Enable USB Device Wake-Up from S3.
Soft-Off by PWRBTN
Instant-Off Press power button then Power off instantly. (Default value)
Delay 4 Sec. Press power button 4 sec. to Power off. Enter suspend if...

BIOS Setup - 37 -
EnglishMouse Power On
Disabled Disabled this function. (Default value)
Enabled Double click on PS/2 mouse left button to power on the system.
PME Event Wake Up
This feature requires an ATX power supply that provides at least 1A on the 5VSB lead.
Disabled Disable this function.
Enabled Enable PME as wake up event. (Default value)
Modem Ring Resume
An incoming call via modem can awake the system from any suspend state.
Disabled Disable Modem Ring Resume function.
Enabled Enable Modem Ring...

GA-K8VM800M Motherboard - 38 -
English
2-5 PnP/PCI Configurations
PCI 1 IRQ Assignment
Auto Auto assign IRQ to PCI 1. (Default value)
3,4,5,7,9,10,11,12,14,15 Set IRQ 3,4,5,7,9,10,11,12,14,15 to PCI 1.
PCI 2 IRQ Assignment
Auto Auto assign IRQ to PCI 2. (Default value)
3,4,5,7,9,10,11,12,14,15 Set IRQ 3,4,5,7,9,10,11,12,14,15 to PCI 2.
PCI 3 IRQ Assignment
Auto Auto assign IRQ to PCI 3. (Default value)
3,4,5,7,9,10,11,12,14,15 Set IRQ 3,4,5,7,9,10,11,12,14,15 to PCI 3.
CMOS Setup Utility-Copyright (C)...

BIOS Setup - 39 -
English2-6 PC Health Status
Current Voltage(V) Vcore / DDR25V / +3.3V / +12V
Detect systems voltage status automatically.
Current CPU Temperature
Detect CPU temperature automatically.
Current CPU/SYSTEM FAN Speed (RPM)
Detect CPU/SYSTEM fan speed status automatically.
CPU FAN Fail Warning
Disabled Disable CPU fan fail warning function. (Default value)
Enabled Enable CPU fan fail warning function.
SYSTEM FAN Fail Warning
Disabled Disable SYSTEM fan fail warning function. (Default value)...

GA-K8VM800M Motherboard - 40 -
English
2-7 Frequency / Voltage Control
K8 CPU Clock Ratio
Default Set K8 CPU Clock Ratio to CPU factory default. (Default value)
x4 800Mhz ~ x10 2000Mhz Set K8 CPU Clock Ratio from x4 800Mhz to x10 2000Mhz.
CPU Host Clock Control
Note: Please note that if your system is overclocked and cannot restart, please wait 20secs.
for automatic system restart or clear the CMOS setup data and perform a safe restart.
Disabled Disable CPU Host Clock Control.(Default value)
Enabled...