Gigabyte Ga8simlnf Manual

- 38 - GA-8SIML MotherboardEnglishPower Management Setup
CMOS Setup Utility-Copyright (C) 1984-2002 Award Software
Power Management Setup
ACPI Suspend Type[S1(POS)]Item Help
MODEM Use IRQ[AUTO]Menu Level u
Soft-Off by Power Button[Off]
System After AC Back[Off]
IRQ [3-7, 9-15], NMI[Enabled]
ModemRingOn/WakeOnLan[Enabled]
PME Event Wake Up[Disabled]
USB Device Wake-up From S3[Disabled]
Power On by Keyboard[Password]
Power On by Mouse[Disabled]
Resume by Alarm[Disabled]
x Month AlarmNA
x Day (of Month)0
x...

- 39 -BIOS SetupEnglish89Set MODEM Use IRQ to 9.
810Set MODEM Use IRQ to 10.
811Set MODEM Use IRQ to 11.
CSoft-off by Power Button
8OffThe user press the power button once, he can turn off the system.
(Default Value)
8SuspendThe user press the power button once, then he can enter suspend mode.
CSystem after AC Back
8Last StateWhen AC-power back to the system, the system will return to the Last state
before AC-power off.
8OffWhen AC-power back to the system, the system will be in Off state.
(Default...

- 40 - GA-8SIML MotherboardEnglishCUSB Device Wake-up From S3
When set at Enabled, it allows USB Device to activate the system from ACPI S3 power saving
mode.
8EnabledEnable USB Device Wakeup.
8DisabledDisable USB Device Wakeup. (Default Value)
CPower On by Keyboard
8PasswordInput password (from 1 to 8 characters) and press Enter to set the Keyboard
Power On Password.
CPower On by Mouse
8EnabledEnable PS2 Mouse Power Up Control function. (Default Value)
8DisabledDisable this function.
C  Resume by Alarm...

- 41 -BIOS SetupEnglishPnP/PCI Configurations
Figure 7: PnP/PCI Configurations
C Resources Controlled By
8ManualUser can set the PnP resource (I/O Address, IRQ & DMA
channels) used by legacy ISA DEVICE.
8AutoBIOS automatically use these PnP rescuers. (Default value)
C IRQ Resources ( 3,4,5,7,9,10,11,12,14,15 )
8PCI DeviceThe resource is used by PCI device.
8ReservedSet the resource to reserved. CMOS Setup Utility-Copyright (C) 1984-2002 Award Software
PnP/PCI Configurations
Resources Controlled...

- 42 - GA-8SIML MotherboardEnglishCPCI1 IRQ Assignment
8AutoAuto assign IRQ to PCI1. (Default value)
83,4,5,7,9,10,11,12,14,15Set IRQ 3,4,5,7,9,10,11,12,14,15 to PCI4.
CPCI2 IRQ Assignment
8AutoAuto assign IRQ to PCI2. (Default value)
83,4,5,7,9,10,11,12,14,15Set IRQ 3,4,5,7,9,10,11,12,14,15 to PCI1/5.
CPCI3 IRQ Assignment
8AutoAuto assign IRQ to PCI3. (Default value)
83,4,5,7,9,10,11,12,14,15Set IRQ 3,4,5,7,9,10,11,12,14,15 to PCI2/6. 

- 43 -BIOS SetupEnglishPC Health Status
Figure8: PC Health Status
C Reset Case Open Status
C Case Status
If the case is closed, Case Status will show Closed.
If the case have been opened, Case Status will show Opened.
If you want to reset Case Status value, set Reset Case Open Status to
Yes and save CMOS, your computer will restart.
CCurrent Voltage (V) VCORE  / +3.3V / +5V / +12V
8Detect system’s voltage status automatically. CMOS Setup Utility-Copyright (C) 1984-2001 Award Software
PC Health Status...

- 44 - GA-8SIML MotherboardEnglishC Current System Temperature
8Detect System Temp. automatically.
C Current CPU Temperature
8Detect CPU Temp. automatically.
C Current CPU Fan / System Fan Fan Speed (RPM)
8Detect Fan speed status automatically.
C CPU Warning Temperature
860°C / 140°FMonitor CPU Temp. at 60°C / 140°F.
870°C / 158°FMonitor CPU Temp. at 70°C / 158°F.
880°C / 176°FMonitor CPU Temp. at 80°C / 176°F.
890°C / 194°FMonitor CPU Temp. at 90°C / 194°F.
8DisabledDisable this function.(Default...

- 45 -BIOS SetupEnglishFrequency/Voltage Control
Figure 9: Frequency/Voltage Control CMOS Setup Utility-Copyright (C) 1984-2002 Award Software
Frequency/Voltage Control
CPU Clock Ratio[15X]Item Help
Linear Frequency Control[Disabled]Menu Level u
Y  CPU Clock100
Y DRAM Clock (MHz)N/A
Y AGP Clock (MHz)N/A
Y PCI Clock (MHz)N/A  higf: Move    Enter:Select   +/-/PU/PD:Value   F10:Save    ESC:Exit    F1:General Help
F5:Previous Values    F6:Fail-Safe Defaults    F7:Optimized DefaultsNote: If system hangs up...

- 46 - GA-8SIML MotherboardEnglishC DRAM Clock (MHz)
This feature allows you to adjust the DRAM frequency, When Linear Frequency Control is set to
Enabled.
8Please set DRAM Clock according to your requirement.
If you use DDR200 DRAM module, please set “DRAM Clock(MHz)” to 100. If you use DDR333
DRAM module, please set “DRAM Clock(MHz)” to 166.
Incorrect using it may cause your system broken. For power End-User use only!
C AGP Clock (MHz)
This feature allows you to adjust the AGP frequency, When Linear...

- 47 -BIOS SetupEnglishLoad Fail-Safe Defaults
Load Fail-Safe Defaults
Fail-Safe defaults contain the most appropriate values of the system parameters that allow
minimum system performance.CMOS Setup Utility-Copyright (C) 1984-2002 Award Software
}Standard CMOS Features}Frequency/Voltage Control
}Advanced BIOS FeaturesLoad Fail-Safe Defaults
}Advanced Chipset FeaturesLoad Optimized Defaults
}Integrated PeripheralsSet Supervisor Password
}Power Management SetupSet User Password
}PnP/PCI ConfigurationsSave...