Gigabyte Ga6vxc74xp Manual

BIOS Setup 
44 
•
•• •  DMA Channel (0,1,3,5,6,7) 
PnP  The resource is used by PnP device. 
ISA / EISA  The resource is used by ISA / EISA device (PCI or ISA). 
•
•• •  IRQ (3,4,5,7, 9,10,11,14,15)   
PCI/PnP  The resource is used by PCI/PnP device. 
ISA / EISA  The resource is used by ISA / EISA device (PCI or ISA). 
 
 
 
 
 
 
 
  

6VXC7-4X-P Motherboard 
45 
Load BIOS Defaults 
Figure 7: Load BIOS Defaults 
•
•• •   Load BIOS Defaults 
BIOS defaults contain the most appropriate values of the system parameters that allow 
minimum system performance. 
 
 
 
 
 
 
 
 
 
 
AMIBIOS SIMPLE SETUP UTILITY-VERSION 1.21 
( C ) 1999 American Megatrends, Inc. All Rights Reserved 
STANDARD CMOS SETUP  INTEGRATED PERIPHERALS 
BIOS FEATURES SETUP  HARDWARE MONITOR SETUP 
CHIPSET FEATURES SETUP  SUPERVISOR PASSW ORD 
POW ER MANAGEMENT SETUP  USER...

BIOS Setup 
46 
Load Setup Defaults 
Figure 8: Load Setup Defaults 
 
•
•• •  Load Setup Defaults 
  Selecting this field loads the factory defaults for BIOS and Chipset Features which the 
system automatically detects. 
 
 
AMIBIOS SIMPLE SETUP UTILITY-VERSION 1.21 
( C ) 1999 American Megatrends, Inc. All Rights Reserved 
STANDARD CMOS SETUP  INTEGRATED PERIPHERALS 
BIOS FEATURES SETUP  HARDWARE MONITOR SETUP 
CHIPSET FEATURES SETUP  SUPERVISOR PASSW ORD 
POW ER MANAGEMENT SETUP  USER PASSW ORD...

6VXC7-4X-P Motherboard 
47 
Integrated Peripherals 
Figure 9: Integrated Peripherals   
•
•• • OnBoard IDE 
Disabled  Disabled OnBoard IDE 
Both  Set OnBoard IDE is Both (Default Value)
. 
Primary  Set OnBoard IDE is Primary 
Secondary  Set OnBoard IDE is Secondary 
•
•• •  On Board FDC 
Auto  Set On Board FDC is Auto (Default Value)
. 
Disabled  Disabled On Board FDC 
Enabled  Enabled On Board FDC 
•
•• •  Onboard Serial Port 1   
Auto  BIOS will automatically setup the port 1 address (Default Value)
....

BIOS Setup 
48 
•
•• •  Onboard Serial Port 2   
Auto  BIOS will automatically setup the port 2 address (Default Value)
. 
3F8/COM1  Enable onboard Serial port 2 and address is 3F8. 
2F8/COM2  Enable onboard Serial port 2 and address is 2F8. 
3E8/COM3  Enable onboard Serial port 2 and address is 3E8. 
2E8/COM4  Enable onboard Serial port 2 and address is 2E8. 
Disabled  Disable onboard Serial port 2. 
•
•• •  Serial Port 2 Mode 
ASKIR  Set onboard I/O chip Serial Port 2 to ASKIR Mode. 
IrDA  Set onboard...

6VXC7-4X-P Motherboard 
49 
•
•• •  OnBoard AC’97 Audio   
Auto  Set AC’97 Audio to Auto (Default Value)
. 
Disabled  Disabled AC’97 Audio. 
•
•• •  OnBorard MC’97 Modem   
Auto  Set MC’97 Modem to Auto (Default Value)
. 
Disabled  Disabled MC’97 Modem. 
 
  

BIOS Setup 
50 
Hardware Monitor 
Figure 10: Hardware Monitor 
•
•• •  ACPI Shutdown Temp. (
°
°° °C / 
°
°° °F) 
        (This function will be effective only for the operating systems that support ACPI Function.) 
Disabled  Disable ACPI Shutdown function. (Default Value)
 
60°C / 140°F  Monitor CPU Temp. at 60°C / 140°F,  i f  Te m p .  >  6 0°C / 140°F 
system will automatically power off. 
65°C / 149°F  Monitor CPU Temp. at 65°C / 149°F,  i f  Te m p .  >  6 5°C / 149°F 
system will automatically...

6VXC7-4X-P Motherboard 
51 
•
•• • Case Status 
If the case is closed, “Case Status” will show “Closed”. 
If the case have been opened, “Case Opened” will show “Open”. 
•
•• •  Current CPU FAN Speed   
Detect CPU Fan speed status automatically . 
•
•• •  Current System FAN Speed   
Detect System Fan speed status automatically . 
•
•• •    Current Voltage (V) VCORE / +3.3V / +12V / +5V 
Detect system’s voltage status automatically. 
 
 
 
 
 
 
 
 
  

BIOS Setup 
52 
Set Supervisor / User Password   
When you select this function, the following message will appear at the center of the screen to 
assist you in creating a password. 
Figure 11: Password Setting 
Type the password, up to eight characters, and press . The password typed now will 
clear the previously entered password from CMOS memory. You will be asked to confirm the 
password. Type the password again and press . You may also press  to abort the 
selection and not enter a password. 
To...

6VXC7-4X-P Motherboard 
53 
IDE HDD AUTO Detection 
  Figure 12: IDE HDD Auto Detection 
Type Y will accept the H.D.D. parameter reported by BIOS.   
Type N will keep the old H.D.D. parameter setup. If the hard disk cylinder number is over 1024, 
then the user can select LBA mode or LARGER mode for DOS partition larger than 528 MB. 
 
AMIBIOS SETUP – STANDARD CMOS SETUP 
( C ) 1999 American Megatrends, Inc. All Rights Reserved 
Date (mm/dd/yyyy) : Tue Jan 25, 2000 
Time (hh/mm/ss)  : 10:36:24 
TYPE...