GGP Italy SPA Lawn Tractor 71503777 2 Operators Manual

FRENITNLTONDEUSE AUTOPORTÉE
LAWN-TRACTOR
RASENTRAKTOR
TRATTORINO RASAERBA
ZITMAAIER
GEBRUIKERSHANDLEIDING MANUALE DI ISTRUZIONI
71505037/4
GEBRAUCHSANWEISUNG
DEOPERATOR’S MANUAL MANUEL D’UTILISATION
Realizzazione: EDIPROM / bergamo   -   PRINTED IN ITALY
GGP ITALY 
SPA
 • Via del Lavoro, 6 • I-31033 Castelfranco Veneto (TV) ITALY
 

INTRODUCTION
Dear Customer,
Thank you for having chosen one of our products. We hope that you will get
complete satisfaction from using your new machine and that it will fully meet all
your expectations.
This manual has been compiled in order that you may get to know your machine
and to be able to use it safely and efficiently. Don’t forget that it forms an integral
part of the machine, so keep it handy so that it can be consulted at any time,
and pass it on to the purchaser if you resell the machine....

TABLE OF CONTENTS
1. SAFETY........................................................................................................... 3
Regulations for using the machine safely
2.  IDENTIFICATION OF THE MACHINE AND COMPONENTS ........................ 7
Explanations on how to identify the machine and its main components
3. UNPACKING AND ASSEMBLY ...................................................................... 9
Explanations on how to remove the packing and on how to assemble
separated parts
4....

1. SAFETY
1.1 HOW TO READ THE MANUAL
Some paragraphs in the manual containing information of particular importance
for safety and operation are highlighted at various levels of emphasis, and signify
the following:
or    These give details or further informa-
tion on what has already been said, and aim to prevent damage to the
machine..
Non-observance will result in the risk of injury to oneself
or others.
Non-observance will result in the risk of serious injury or
death to oneself or others.
This manual...

1.2 SAFETY REGULATIONS
(read carefully before using the machine)
A) TRAINING
1) Read the instructions carefully. Be familiar with the controls and the proper use of
the equipment.
2) Never allow children or people unfamiliar with these instructions to use the
machine. Local regulations can restrict the age of the operator.
3) Never mow while people, especially children, or pets are nearby.
4) Keep in mind that the operator or user is responsible for accidents or hazards
occurring to other people or their...

fumes can collect.
2) Mow only in daylight or good artificial light.
3) Before attempting to start the engine, disengage all blade attachment clutches and
shift into neutral.
4) Do not use on slopes of more than 10° (17%).
5) Remember there is no such thing as a “safe” slope. Travelling on grass slopes
requires particular care. To guard against overturning:
– do not stop or start suddenly when going up or downhill;
– engage the clutch slowly and always keep the machine in gear, especially when
travelling...

1.3 SAFETY LABELS
Your machine must be used with care. Therefore, labels have been placed on the
machine, to remind you pictorially of the main precautions to take during use.
These labels are to be considered an integral part of the machine.
Should a label fall off or become illegible, contact your Retailer to replace it.
Their meaning is explained below.
1.4 REGULATIONS FOR TOWING
A kit for towing a small trailer is available on request. This
accessory is to be fitted as per the instructions provided....

2. IDENTIFICATION OF THE MACHINE AND COMPONENTS
2.1 IDENTIFICATION OF THE MACHINE
The plate located near the battery hous-
ing has the essential data of each
machine.
The serial number (6) must be quoted
when you require technical assistance or
spare parts.
1.Acoustic power level according
to directive 2000/14/CE
2.Conformity mark according to
directive 98/37/EEC 
3.Year of manufacture
4.Operating engine speed in r.p.m
(if indicated)
5.Type of machine
6.Serial number
7.Weight in kg
8.Name and address of...

12. Blades:these are what cut the grass. The wings at the ends help convey
the cut grass towards the exit.
13. Stone-guard or deflector:this prevents objects drawn up by the blades
from being thrown outside of the machine.   
14. Engine:this moves the blades and drives the wheels. Its specifications and
regulations for use are described in a specific manual.
15. Battery:provides the energy for starting the engine. Its specifications and
regulations for use are described in a specific manual.
16. Driver...

3. UNPACKING AND ASSEMBLY
For storage and transport reasons, some components of the machine are not
directly installed in the factory, but have to be assembled after their removal from
the packing. Final assembly is carried out by following these simple instructions.
The machine is supplied without engine oil or fuel. Before
starting up the engine, fill with oil and fuel following the instructions given in the
engine manual.
3.1 UNPACKING
When unpacking the machine, take care to gather all individual...