GE Simon 3 User Guide

Simon Security System25
Testing Communication 
Communication between your system, the central monitoring station and your pager 
should be tested at least once per week to make sure you have the proper telephone 
connection.


To perform a phone test:
1. Open the panel cover.
2. Enter the master access code.
3. Press the Te s t button twice. The panel will announce Phone test, press again to 
change or done to select.
4. Press the DONE button.
Note  
If your system is not con-
nected to a central...

Simon Security System26
 If sirens are not placed within hearing range of persons sleeping, in remote parts of 
the premises, or if they are placed behind doors or other obstacles.
 If intruders gain access through unprotected points of entry or areas where sensors 
have been bypassed.
 If intruders have the technical means of bypassing, jamming, or disconnecting all 
or part of the system.
 If power to sensors is inadequate or disconnected.
 If freeze or any environmental sensors are not located in...

Simon Security System27
 Escape fast! (Do not stop to pack.)
 Use a different escape route if closed doors feel hot to the touch.
 Crawl and hold your breath as much as possible to help reduce smoke inhalation 
during your escape.
 Meet at a designated outdoor location.
 Emphasize that no one should return to the premises if there is a fire.
 Notify the fire department from a neighbor’s phone.
 Emphasize that no one should enter the premises if they hear sirens in the house.
 If you arrive at the...

Simon Security System28 

Simon Security System29
Access Codes
Master Access Code:______________________
Access Code 1:__________________________
Access Code 2:__________________________
Access Code 3:__________________________
Access Code 4:__________________________
Access Code 5:__________________________
Sensor Locations
Sensor NumberSensor TypeLocation
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
X10 Module Locations
Unit #LocationUnit #Location
19
210
311
412
513
614
715
816
Delay Times
Entry...

How to …Control Panel
Remote Handheld
Touchpad
Key Chain
Touchpad
Remote
Phone
Disarm the
System
Subdisarm the
System
Arm Only - Doors
& Windows
Arm Only –
Motion Sensors
Arm Doors,
Windows &
Motion Sensors
Activate No Entry
Delay
Activate Latchkey
Feature
Activate a Panic
Alarm
Check the System
Status
Set Doors to
Chime
Set Special
Motion to Chime
Turn Time
Activated Lights
On/Off
Turn Sensor
Activated Lights
On/Off
Open Garage
Door or Turn On
Special Lights
Turn Lights On
Turn Lights Off
Quick...