GE Rc24914d Instruction Manual

Universal Remote 
Instruction Manual 
Control Remoto Universal
Manual \fe Instrucciones
24914 

2
Congratulations on\c your purc\fase of t\fe G\b Universal 
Remote Control. T\fe G\b Universal Remote Control is 
one of t\fe most eas\cy to use remote controls available 
today. Wit\f t\fe G\b Universal Remote Control, juggling 
multiple remote controls is a t\fing of t\c\fe past! 
Your G\b Universal Remote Control controls multiple 
devices, including t\fe most popular brands of TV, VCR, 
DVD, CBL, and SAT.  T\fe G\b Universal Remote Control 
is easy to use, ea\csy to program, and it gives you total...

3
Your universal remote requires two (2) AAA  
Alkaline batteries\c (not included). 
To Install the Batt\Ceries1. On t\fe back of t\fe r\cemote, pus\f down on \ct\fe tab 
and lift t\fe cover off.
2.  Matc\f t\fe (+) and (-)\c marks on t\fe batte\cries to t\fe 
(+) and (-) marks i\cnside t\fe battery compartment , 
t\fen insert two (2) AAA Alkaline\c batteries. Be sur\ce 
to use fres\f batteries. 
3.  Press t\fe battery cover back into place.\c
NOTE:  If your remote stops operating properly, 
replace t\fe...

4
RECORD, PL\bY, STOP, 
REW, FF, P\bUSE  TV, CBL/S\bT,  
DVR/\bUX, DVD 
Selects device  
to control.Red Indicator Lig\fts w\c\fen 
any button is pressed.
INPUT Selects t\fe video 
inputs from available 
viewing sources.
 
Button Functions
INFO Displays/selects 
on-screen c\fannel 
information.
MENU Press and release 
SHIFT/SETUP t\fen MENU/
INFO to display t\fe Menu\c 
on t\fe TV. See “Using 
SHIFT for Menu and 
Navigation” descript\cion 
on Page 10 for more 
information. 
 
DOT: Used to select digi\ctal...

5
ENTER
For some TV models, used after\c  direct c\fannel number e\cntry 
to immediately c\fang\ce to t\fe  selected c\fannel.
VOLUME UP/DOWN 
C\fanges t\fe volume  level of t\fe product ,  normally t\fe TV.
NUMBERS
\bnter numbers for direct  c\fannel selection. S\come devices require ENTER  to be pressed after c\fannel selection.
ON•OFF Turns 
devices On or Off.
CH\bNNEL UP/DOWN 
C\fanges t\fe c\fannels\c. 
  Button Functions, cont\C .
SETUP Used to setup t\fe r\cemote,
and for code searc\f function....

6
 Programming Your Remote
Your G\b universal remote control is designed to 
control multiple audio/v\cideo devices suc\f as \cTV, 
DVD, DVR, satellite, cable \cand audio using only\c one 
remote. To use t\fis remote, you will need to program 
it to control t\fe devices of your c\foice. T\fere are two 
ways to program t\fe remote - direct code entry or 
auto code searc\f. 
 
Direct Co\fe Entry (Recommen\fe\f)
1.  Locate t\fe Remote Code List provided 
in t\fis manual. Fin\cd t\fe DEVICE 
C\bTEGORY you...

7
 Programming Your Remote, cont .
6.  Point t\fe remote at t\fe device.\c Press 
t\fe POWER button—if t\fe device\c 
turns off, no furt\fer programming is  
required for t\fat device. I\cf t\fe device 
does not turn off, return to step 3 
and use t\fe next code\c found in t\fe 
code list . Continue t\fis process until 
a code for your device is found.
7.  Repeat t\fis process for eac\f device \c
(for example TV, DVD, CBL/S\bT, DVR/
\bUX) in your \fome entertainment 
system you wis\f to control. Four...

8
 Programming Your Remote, cont .
\buto Co\fe Search
T\fe Auto Code Searc\f searc\fes automatically 
t\froug\f all of t\fe codes\c stored in t\fis remote. Read 
all t\fe following s\cteps prior to star\cting t\fe auto 
searc\f as you will need to be \cprepared to lock-in t\fe 
proper code w\fen found.\c  1. Manually turn on t\c\fe device you wis\f 
to control.
2.  Press and \fold t\fe SETUP button until 
t\fe red indicator lig\ft st\cays on 
(approximately 4 seconds) \cand t\fen 
release t\fe button....

9
 Programming Your Remote, cont .
8.  Repeat t\fis process for eac\f device \c(for example 
TV, DVD, SAT, AUX) in your \fome entertainment 
system you wis\f to control. Four devices can\c  
be programmed.
Programming Notes
•  T\fis process may take several minutes as t\fe\c 
remote contains many\c codes. 
•  W\fen using t\fe Auto\c Code Searc\f programming 
met\fod, t\fe device bu\ctton corresponding to 
t\fe type of device you want to control must be 
selected (for exampl\ce, t\fe TV device button must...

10
 Using Your Remote
For M\bNU, press and release  
SHIFT/SETUP t\fen INFO/MENU.
For OK, press and release  
SHIFT/SETUP t\fen MUTE/OK.
For \bXIT, press and release  
SHIFT/SETUP t\fen L\bST/EXIT.
For Up, Down, Left or Rig\c\ft Navigation, 
press and release SHIFT/SETUP 
followed by t\fe respective C\fannel or 
Volume button.
SPECI\bL NOTE: Remote will stay in\c s\fift mode 
until t\fe SHIFT button is pressed again, or unt\cil 10 
seconds of inactivity\c.
Using SHIFT for Menu an\f Navi\Cgation
T\fe...