Gateway m675 User Manual

161
Viewing the display on a projector or monitor
www.gateway.com
Viewing the display on a projector 
or monitor
You can use your notebook for giving presentations by connecting an external 
monitor or projector to your monitor (VGA) port. Your notebook supports 
simultaneous LCD and CRT display. Simultaneous display allows you to control 
the presentation from your notebook and at the same time face your audience.
To use a projector or external monitor:
1Turn off your notebook.
2Plug the projector or...

162
Chapter 7: Using Multimedia
www.gateway.com
6Click the Settings tab.
7Right-click the second monitor icon (labeled 2), then click Attached.
8Click Apply.
9Adjust properties such as Screen Resolution or Color Quality if necessary.
10Click OK.
ImportantPress FN+F3 to switch between viewing the display on the 
LCD panel and viewing the display on the projector or 
monitor.
ImportantIf an external monitor or projector is connected, your 
notebook turns off the LCD panel, but does not enter 
Standby mode,...

163
Viewing the display on a television
www.gateway.com
Viewing the display on a television
The S-Video out jack on your notebook and port replicator lets you view your 
notebook display on a television screen using a standard S-Video cable.
To view your notebook display on a television:
1With your notebook off, connect one end of a standard S-Video cable to 
the S-Video out jack. For the location of the S-Video out jack on your 
notebook, see “Back” on page 7. For the location of the S-Video out jack...

164
Chapter 7: Using Multimedia
www.gateway.com
7Click the Settings tab.
8Click Advanced. The (Multiple Monitors) and MOBILITY RADEON 9600 
Properties dialog box opens. 

165
Viewing the display on a television
www.gateway.com
9Click the Displays tab.
10Click the Enable TV button if it is not already enabled.
ImportantIf the Enable TV and TV buttons are grayed out, your 
notebook has not detected the television. Make sure that 
the television is turned on and connected correctly.
Enable TV
TV 

166
Chapter 7: Using Multimedia
www.gateway.com
11Click TV to make any adjustments to the TV settings.
12Click Apply.
13Click OK to close the (Multiple Monitors) and MOBILITY RADEON 9600 
Properties dialog box.
14Click OK to close the Display Properties dialog box.
15Click X to close the Control Panel window.
ImportantIf you are traveling internationally, you may need to change 
the video standard. For example, many televisions in Asia 
use PAL instead of NTSC. 

8
167
Managing Power
While your notebook is running on battery power, you 
should manage power consumption to get the most use out 
of the battery. Read this chapter to learn how to:
■Check and recharge the battery
■Recalibrate the battery
■Change batteries
■Extend the life of the battery by conserving battery 
power and using alternate power sources
■Change power-saving settings 

168
Chapter 8: Managing Power
www.gateway.com
Monitoring the battery charge
Closely monitor the battery charge. When the battery charge gets low, change 
the battery or connect to AC power immediately to prevent losing any unsaved 
work.
Monitor the battery charge by:
■Double-clicking the power cord icon  or battery icon  in the taskbar. 
The Power Meter dialog box opens.
■Pressing FN+STATUS to view the power status box, which opens in the 
upper-left corner of the screen. The power status box shows the...

169
Recharging the battery
www.gateway.com
Recharging the battery
The battery recharges while it is installed and your notebook is connected to 
AC power. While the battery is recharging, the battery charge indicator turns 
purple and the battery icon in the taskbar has a lightning bolt .
ImportantIf the power cord or battery icon does not appear on the 
taskbar, click the show hidden icons button. If the icon 
still does not appear, make sure that Always show icon 
on the taskbar is checked on the Power...

170
Chapter 8: Managing Power
www.gateway.com
Recalibrating the battery
If your notebook unexpectedly goes into Standby mode while you are using it 
but the battery charge is not low, you may need to recalibrate your battery. 
You should also recalibrate the battery periodically to maintain the accuracy 
of the battery gauge.
To recalibrate the battery:
1Connect the AC adapter, then turn on your notebook.
2As soon as it starts and you see a startup screen, press F2. The BIOS Setup 
utility opens.
3Open...