Gateway m520 remove replace optical drive User Manual

							
1www.gateway.com
Replacing the Gateway M520 Optical 
Drive
This package includes an optical drive, such as a CD or DVD drive, for your Gateway M520 
notebook and these printed instructions.
Tools you need
You need a small Phillips screwdriver to replace the optical drive.
Preventing static electricity discharge
The components inside your notebook are extremely sensitive to static electricity, also 
known as  electrostatic discharge  (ESD).
Before replacing the keyboard, follow these guidelines:
■Turn off your notebook.
■Wear a grounding wrist strap (available at most electronics stores) and attach it to a 
bare metal part of your workbenc h or other grounded connection.
■Touch a bare metal surface on your workbench or other grounded object.
■Unplug the power cord and the modem and network cables.
■Remove battery. For more information, see  “Changing batteries” in your user guide.
■Disconnect all peripheral devices and remove any PC Cards.
WarningTo avoid exposure to dangerous electrical voltages and 
moving parts, turn off your notebook and unplug the power 
cord and modem and network cables before opening the 
case.
Caution ESD can permanently damage electrostatic 
discharge-sensitive components in your notebook. Prevent 
ESD damage by following ESD guidelines every time you 
replace the keyboard. 
Warning To prevent risk of electric shock, do not insert any object 
into the vent holes of your notebook. 
						

							
2www.gateway.com
Before working with notebook components, follow these guidelines:
■Avoid static-causing surfaces such as carpeted floors, plastic, and packing foam.
■Remove components from their antistatic bags only when you are ready to use them. 
Do not lay components on the outside of antistatic bags because only the inside of 
the bags provide electrostatic protection.
■Always hold components by their edges. Avoid touching the edge connectors. Never 
slide components over any surface.
Replacing the optical drive
To replace the optical drive:
1Follow the instructions under “Preventing  static electricity discharge” on page 1.
2Make sure the optical drive is empty and the tray is firmly closed.
3Turn off your notebook.
4Disconnect the AC adapter and modem and network cables.
5Turn your notebook over so the bottom is facing up.
6Remove the battery. For more information, see “Changing batteries” in your user 
guide.
7With a small Phillips screwdriver, remove the two optical drive screws and put them 
in a safe place.
Screws 
						

							
3www.gateway.com
8Insert a straightened paper clip into the optical drive’s manual eject hole, then press 
the paper clip to eject the drive tray.
9Pull the drive tray open, then carefully slide the drive out of the drive bay.
10Slide the new optical drive into the drive bay. Make sure that the drive fits securely 
in the bay.
11Secure the optical drive with the two screws removed in step 2.  
						

							
4www.gateway.com
12Turn your notebook over so the top is facing up.
13Connect the power adapter and modem and network cables, then turn on your 
notebook.
Technical Support
See your user’s guide for Gateway Technical Support information.
Safety, Regulatory, and Legal Information
See your user’s guide for important safety, regulatory, and legal information.
© 2004 Gateway, Inc. All rights reserved. Gateway, Gateway Country, the Gateway stylized logo, and the 
black-and-white spot design are trademarks or registered trademarks of Gateway, Inc. in the United States and 
other countries. All other brands and product names are trad emarks or registered trademarks of their respective 
companies.
MAN M520 OPTICAL RPL GDE R0 6/04