Gateway m500 m505 remove replace keyboard User Manual

							1www.gateway.com
Replacing the Gateway M505 Keyboard
This package includes a replacement keyboard for your Gateway M505 
notebook and these printed instructions.
Tools you need
You need a small Phillips and a small flat-blade screwdriver.
Preventing static electricity discharge
The components inside your notebook are extremely sensitive to static 
electricity, also known as electrostatic discharge (ESD).
Before replacing the keyboard, follow these guidelines:
■Turn off your notebook.
■Wear a grounding wrist strap (available at most electronics stores) and 
attach it to a bare metal part of your workbench or other grounded 
connection.
■Touch a bare metal surface on your workbench or other grounded object.
■Unplug the power cord and the modem and network cables.
■Remove the battery. For more information, see “Changing batteries” in 
your user guide.
■Disconnect all peripheral devices and remove any PC Cards.
WarningESD can permanently damage electrostatic 
discharge-sensitive components in your notebook. Prevent 
ESD damage by following ESD guidelines every time you 
replace the keyboard.
WarningTo avoid exposure to dangerous electrical voltages and 
moving parts, turn off your notebook and unplug the power 
cord and modem and network cables before replacing the 
keyboard.
WarningTo prevent risk of electric shock, do not insert any object 
into the vent holes of the notebook. 
						

							2www.gateway.com
Before working with notebook components, follow these guidelines:
■Avoid static-causing surfaces such as carpeted floors, plastic, and packing 
foam.
■Remove components from their antistatic bags only when you are ready 
to use them. Do not lay components on the outside of antistatic bags 
because only the inside of the bags provide electrostatic protection.
■Always hold components by their edges. Avoid touching the edge 
connectors. Never slide components over any surface.
To remove the keyboard:
1Follow the instructions under “Preventing static electricity discharge” on 
page 1.
2Turn off your notebook, then unplug the AC adapter, modem and network 
cables.
3Turn your notebook over so the bottom is facing up, then remove the 
battery.
4Remove the two screws securing the keyboard and the keyboard cover.
Screws 
						

							3www.gateway.com
5Turn your notebook over so the top is facing up, then remove the hinge 
screws.
6Open the LCD panel to the fully open position. Be careful not to use too 
much force when opening the LCD panel.
7Insert the small flat-blade screwdriver under the edge of the hinge and 
gently pry up the keyboard cover.
ImportantInserting a piece of cloth between the screwdriver and 
keyboard and notebook case will help prevent damage to 
your notebook.
Screws 
						

							4www.gateway.com
8Pull the cover off your notebook. You will hear small snapping sounds as 
the cover comes away from your notebook. Be careful not to break off the 
tabs found on the front of the cover.
9Lift the back edge of the keyboard, then slowly rotate it toward you so it 
lies keys-down on top of your notebook. Be careful not to damage the 
LCD panel. 
						

							5www.gateway.com
10Carefully insert the small flat-blade screwdriver between the keyboard 
cable and the black plastic hinge where the cable connects to the system 
board. Gently lift the hinge off the cable. The cable is now free and you 
can remove the keyboard.
To install the keyboard:
1Place the new keyboard keys-down on your notebook with the space bar 
away from you.
2Verify the black plastic hinge on the system board keyboard connector is 
in the raised position.
3Insert the end of the keyboard cable between the black plastic hinge and 
the white connector.
4Press the black plastic hinge onto the keyboard cable.
5Rotate the keyboard toward the LCD panel until the keyboard is 
almost face-up.
ImportantThe plug is correctly oriented if the cable is not twisted. 
						

							6www.gateway.com
6Insert the tabs on the front of the keyboard under the palm rest.
7Gently press the keyboard down until it is flat. The keyboard should easily 
fall into place. Be careful not to damage the LCD panel.
8Slide the front keyboard cover tabs under your notebook frame and align 
the hinges. Press down on the cover in several places until it clicks in place.
9Close the LCD panel and turn your notebook so the back is facing you.
10Install the hinge screws.
WarningIf the cover is not correctly replaced, your notebook could 
be damaged when you try to close the LCD panel.
Tabs 
						

							7www.gateway.com
11Turn your notebook over so the bottom is facing up, then install the two 
screws securing the keyboard and the keyboard cover.
12Replace the battery, connect the power adapter and modem and network 
cables, then turn on your notebook.
Screws
Screws 
						

							8www.gateway.com
See your user’s guide for important technical support, safety, regulatory, and 
legal information.
© 2003 Gateway, Inc. All rights reserved. Gateway, Gateway Country, the Gateway stylized logo, and the 
black-and-white spot design are trademarks or registered trademarks of Gateway, Inc. in the United States and 
other countries. All other brands and product names are trademarks or registered trademarks of their respective 
companies.
MAN RPL M505 KB INST R0 10/03
8509520