Gateway m350 remove replace optical drive User Manual

							1www.gateway.com
Replacing the Gateway M350 
Optical Drive
This package includes an optical drive, such as a CD or DVD drive, for your 
Gateway M350 notebook and these printed instructions.
Tools you need
You need a small Phillips screwdriver to replace the optical drive.
Preventing static electricity discharge
The components inside your notebook are extremely sensitive to static 
electricity, also known as electrostatic discharge (ESD).
Before replacing the optical drive, follow these guidelines:
■Turn off your notebook.
■Wear a grounding wrist strap (available at most electronics stores) and 
attach it to a bare metal part of your workbench or other grounded 
connection.
■Touch a bare metal surface on your workbench or other grounded object.
■Unplug the power cord and the modem and network cables.
WarningESD can permanently damage electrostatic 
discharge-sensitive components in your notebook. 
Prevent ESD damage by following ESD guidelines every 
time you replace the optical drive.
WarningTo avoid exposure to dangerous electrical voltages and 
moving parts, turn off your notebook and unplug the power 
cord and modem and network cables before replacing the 
optical drive.
WarningTo prevent risk of electric shock, do not insert any object 
into the vent holes of the notebook. 
						

							2www.gateway.com
■Remove the battery. For more information, see “Changing batteries” in 
your user guide.
■Disconnect all peripheral devices and remove any PC Cards.
Before working with notebook components, follow these guidelines:
■Avoid static-causing surfaces such as carpeted floors, plastic, and packing 
foam.
■Remove components from their antistatic bags only when you are ready 
to use them. Do not lay components on the outside of antistatic bags 
because only the inside of the bags provide electrostatic protection.
■Always hold components by their edges. Avoid touching the edge 
connectors. Never slide components over any surface.
Replacing the optical drive
To replace the optical drive:
1Follow the instructions under “Preventing static electricity discharge” on 
page 1.
2Make sure the optical drive is empty and the tray is firmly closed.
3Turn off your notebook.
4Disconnect the AC adapter and modem and network cables.
5Turn your notebook over so the bottom is facing up.
6Remove the battery. 
						

							3www.gateway.com
7With a small Phillips screwdriver, remove the two optical drive screws and 
put them in a safe place.
8Slide the old drive out of your notebook.
Tips & TricksTo make removing the optical drive easier, insert a 
straightened paperclip into the manual eject hole on the 
optical drive. Grab the open optical drive tray and pull the 
drive straight out.
Screws 
						

							4www.gateway.com
9Slide the new drive into your notebook.
10Replace the two optical drive screws.
11Replace the battery.
12Turn the notebook over so the top is facing up.
13Connect the power adapter and modem and network cables, then turn on 
your notebook.
Safety, Regulatory, and Legal Information
See your user’s guide for important technical support, safety, regulatory, and 
legal information.
© 2003 Gateway, Inc. All rights reserved. Gateway, Gateway Country, the Gateway stylized logo, and the 
black-and-white spot design are trademarks or registered trademarks of Gateway, Inc. in the United States and 
other countries. All other brands and product names are trademarks or registered trademarks of their respective 
companies.
MAN RPL M350 OPTC DRV R0 8/03