Gateway m305 User Manual

11
Identifying your model
www.gateway.com
Gateway serial number
You can locate the Gateway serial number:
■Printed on a white sticker on the bottom or back of your notebook.
■Printed on the customer invoice that came with your notebook. The 
invoice also contains your customer ID number.
■Displayed in Help and Support in Windows XP. Click Start, Help and 
Support
, then click View product serial number.
Internal wireless label
A label similar to the following indicates your notebook contains a wireless...

12
Chapter 1: Checking Out Your Gateway M305
www.gateway.com
Finding your specifications
For more information about your notebook, such as memory size, memory type, 
and hard drive size, go to the 
See your PC’s configuration link in Help and Support 
in Windows XP or visit Gateway’s eSupport page at support.gateway.com
. The 
eSupport page also has links to additional Gateway documentation and detailed 
specifications.
In Windows XP, view your notebook’s serial number by clicking 
Start, Help and...

13
Accessories
www.gateway.com
Accessories
Gateway offers accessories that can help you make the most of using your 
notebook. To order accessories, visit the Accessory Store at 
accessories.gateway.com
.
Batteries and automobile/airplane power adapters
If you run your notebook on battery power for extended periods, you may want 
to buy an additional battery so you can swap batteries when necessary. See 
“Changing batteries” on page 153 for more information.
With an automobile/airplane power adapter, you...

14
Chapter 1: Checking Out Your Gateway M305
www.gateway.com 

2
15
Getting Started
This chapter provides basic information about your 
Gateway notebook. Read this chapter to find out how to:
■Connect the AC adapter
■Start and turn off your notebook
■Identify the status indicators
■Use the keyboard
■Use the EZ Pad touchpad
■Connect the modem
■Connect to an Ethernet network
■Install peripheral devices 

16
Chapter 2: Getting Started
www.gateway.com
Connecting the AC adapter
You can run your notebook using an AC adapter or your notebook’s battery. 
The battery was shipped to you partially charged. You should use the 
AC adapter right away to fully charge the battery. Allow 24 hours for the battery 
to fully charge.
To connect the AC adapter:
1Connect the power cord to the AC adapter.
ImportantIf the battery is not fully charged before you use your 
notebook on battery power for the first time, the...

17
Connecting the AC adapter
www.gateway.com
2Connect the AC adapter to your notebook’s power connector.
3Plug the power cord into a wall outlet.
The battery charge indicator turns on (see “Front” on page 2 for the 
location of the battery charge indicator). If the battery charge indicator 
does not turn on, unplug the adapter from your notebook, then plug it 
back in.
4When you finish using your notebook for the first time, turn your 
notebook off and leave your notebook connected to AC power for at...

18
Chapter 2: Getting Started
www.gateway.com
Protecting from power source problems
During a power surge, the voltage level of electricity coming into your notebook 
can increase to far above normal levels and cause data loss or system damage. 
Protect your notebook and peripheral devices by connecting them to a surge 
protector, which absorbs voltage surges and prevents them from reaching your 
notebook.
WarningHigh voltages can enter your notebook through both the 
power cord and the modem connection....

19
Starting your notebook
www.gateway.com
Starting your notebook
To start your notebook:
1Press the latch on the front of your notebook, then lift the LCD panel.
2Press the power button located above the keyboard.
The power button is preset to On/Off mode. However, you can also set it 
to function in Standby/Resume mode. For instructions on changing the 
power button mode, see “Changing power settings” on page 157.
3If you are starting your notebook for the first time, follow the on-screen 
instructions...

20
Chapter 2: Getting Started
www.gateway.com
Waking up your notebook
When you do not use your notebook for several minutes, or if you close the 
LCD panel without turning your notebook off, it may enter a power-saving 
mode called Standby. While in Standby, the power indicator flashes.
If your notebook is in Standby mode, pressing the power button to “wake” it 
up. For more information on changing power-saving settings, see “Changing 
power settings” on page 157.
Turning off your notebook
To turn off...