Gateway 200arc User Manual

141
Viewing the display on a television
www.gateway.com
To view your notebook display on a television:
1With your notebook off, connect one end of a standard S-Video cable to 
the S-Video out jack. For the location of the S-Video out jack on your 
notebook, see “Back” on page 5.
2Connect the other end of the cable to the Video in jack on your television 
or VCR.
3Turn on the television or VCR.
4Start your notebook.
5In Windows XP, click Start, then click Control Panel. The Control Panel 
window opens. If...

142
Chapter 7: Using Multimedia
www.gateway.com
9Click the Intel Extreme Graphics tab.
10Click the Graphics Properties button. The Intel Graphics Controller Properties 
dialog box opens.
11Click the Te l e v i s i o n button.
12Click the arrow button to open the Colors list, then click True  Co l o r.
13Click the arrow button to open the Screen Area list, then click 640 by 480.
14Click the arrow button to open the Video Standard list, then click NTSC-M.
ImportantIf the Television button is grayed out,...

143
Viewing the display on a television
www.gateway.com
15Click Apply. Your LCD panel will blank out and what was on your LCD 
panel now appears on your television.
16Click OK.
Changing from one display to another
After you set up a television as the second display on your notebook, you can 
quickly switch between viewing the display on the LCD panel and viewing it 
on the television.
ImportantYour television may be able to run at a higher resolution. 
If the icons and screen area appear too large on...

144
Chapter 7: Using Multimedia
www.gateway.com 

8
145
Managing Power
While your notebook is running on battery power, you 
should manage power consumption to get the most use out 
of the battery. Read this chapter to learn how to:
■Check and recharge the battery
■Recalibrate the battery
■Change batteries
■Extend the life of the battery by conserving battery 
power and using alternate power sources
■Change power-saving settings 

146
Chapter 8: Managing Power
www.gateway.com
Monitoring the battery charge
Closely monitor the battery charge. When the battery charge gets low, connect 
to AC power immediately to prevent losing any unsaved work.
To monitor the battery charge:
■Double-click the power cord icon  or battery icon  in the taskbar. The 
Power Meter dialog box opens.
■Press FN+STATUS to view the power status box, which opens in the 
upper-left corner of the screen. The power status box shows the current 
power source, the...

147
Recharging the battery
www.gateway.com
■Press the battery meter button on the battery. The battery meter lights 
indicate the percentage of battery charge remaining.
■Wait for a Low Battery warning message to appear.
If your battery charge indicator displays what looks like an inaccurate charge, 
you may need to recalibrate the battery. For more information, see 
“Recalibrating the battery” on page 148.
Recharging the battery
The battery recharges while it is installed and your notebook is connected...

148
Chapter 8: Managing Power
www.gateway.com
Recalibrating the battery
If your notebook unexpectedly goes into Standby mode while you are using it 
but the battery charge is not low, you may need to recalibrate your battery. 
You should also recalibrate the battery periodically to maintain the accuracy 
of the battery gauge.
To recalibrate the battery:
1Disconnect the AC adapter
2Turn on your notebook.
3As soon as it starts and you see a startup screen, press F2. The BIOS Setup 
utility opens.
4Open the...

149
Changing batteries
www.gateway.com
Changing batteries
If your notebook is connected to AC power, you can change the battery while 
the notebook is turned on. If your notebook is not plugged into an AC outlet, 
you must turn the notebook off while changing the battery.
Replacing the battery
To replace the battery:
1If your notebook is on and is connected to AC power, go to Step 2.
-OR-
If your notebook is on and is not connected to AC power, save your work 
and turn off the notebook.
2Close the LCD...

150
Chapter 8: Managing Power
www.gateway.com
4Slide the locking battery release latch (the right latch in the following 
picture) to the unlock position.
5Slide and hold the remaining battery release latch (the left latch in the 
preceding picture) and slide the battery out of the bay.
6Slide a recharged battery into the bay. Make sure that the battery is fully 
inserted into the bay.
7Slide the locking battery release latch to the locked position.
8Turn your notebook over.
9Open the LCD panel and press...