Garmin Quest 2 User Manual

Quest
®
 and Quest
®
 2
pocket-sized navigatorowner’s manual 

© Copyright 2006 Garmin Ltd. or its subsidiaries
Garmin International, Inc. 
1200 East 151st Street,  
Olathe, Kansas 66062, U.S.A. 
Tel. 913/397.8200 or 800/800.1020
 
Fax 913/397.8282
Garmin (Europe) Ltd. 
Unit 5, The Quadrangle, Abbey Park Industrial 
Estate, Romsey, SO51 9DL, U.K.
 
Tel. 44/0870.8501241
 
Fax 44/0870.8501251
Garmin Corporation  
No. 68, Jangshu 2nd Road, Shijr,  
Taipei County, Taiwan
 
Tel. 886/2.2642.9199
 
Fax 886/2.2642.9099
All rights reserved. Except as expressly provided...

Quest Owner’s Manual i

INTRODUCTION > ABOUT THIS MANUAL
INTRODUCTION
Congratulations on choosing one of the most versatile GPS 
navigation systems available! The Garmin® Quest® utilizes the 
proven performance of Garmin GPS and full-featured mapping to 
create an unsurpassed mobile navigation system. 
About This Manual
This manual covers instructions for the Quest and the Quest 2. To 
get the most out of your new navigation system, go through this 
Owner’s Manual
 and learn the operating procedures for...

ii Quest Owner’s Manual

INTRODUCTION > TABLE OF CONTENTS

Introduction ...........................................................................i
About This Manual  ...................................................................i
Manual Conventions ........................................................................i
Warning ...................................................................................
iv
Caution...

Quest Owner’s Manual iii

INTRODUCTION > TABLE OF CONTENTS

Recalculating a Route ...................................................................24
Adding a Detour ...........................................................................24
Adding Via Points .........................................................................24
Avoiding Roads and Areas ............................................................
26
Using the Main Pages...

iv Quest Owner’s Manual

INTRODUCTION > WARNINGS AND CAUTIONS

Failure to avoid the following potentially hazardous 
situations could result in an accident or collision resulting in 
death or serious injury.
When installing the Quest in a vehicle, place the unit securely 
so that it does not interfere with vehicle operating controls or 
obstruct the driver’s view of the road (see diagram).
Do not mount 
where driver’s 
 
field of vision is 
blocked.
Do not place 
unsecured on 
the vehicle 
dash.
Do not...

Quest Owner’s Manual v

INTRODUCTION > WARNINGS AND CAUTIONS

Failure to avoid the following potentially hazardous 
situations may result in injury or property damage.
The Quest is designed to provide you with route suggestions. 
It does not reflect road closures or road conditions, traffic 
congestion, weather conditions, or other factors that may affect 
safety or timing while driving.
Use the Quest only as a navigational aid. Do not attempt to 
use the Quest for any purpose requiring precise...

vi Quest Owner’s Manual

INTRODUCTION > CARING FOR THE QUEST
Caring for the Quest
The Quest is constructed of high quality materials and does not 
require user maintenance other than cleaning. 
Cleaning the Case 
To clean the unit’s outer casing (except for the screen), use a cloth 
dampened with a mild detergent solution, and then wipe dry. 
Avoid chemical cleaners and solvents that may damage plastic 
components.
Cleaning the Screen
Clean the screen using a soft, clean, lint-free cloth. Use water,...

Quest Owner’s Manual 1

UNIT OVERVIEW > INTRODUCING THE QUEST
UNIT OVERVIEW
Introducing the Quest
Power/Speaker connector
External antenna 
connector
Back View
USB connectorPower Key
Flip-up GPS antenna
(Position the antenna parallel to 
the surface of the road.)
Keypad256-Color high-resolution TFT display
Front View 

2 Quest Owner’s Manual

UNIT OVERVIEW > A TUTORIAL

A Tutorial
This tutorial guides you through the steps for finding a restaurant in 
your area and then creating a route to it. 
If you have a Quest (not a Quest 2), you need to first load detailed 
maps onto your Quest. Refer to the setup guide in the DVD-ROM 
case. The Quest 2 has map data loaded already; you do not need to 
load additional data on the Quest 2. 
Step 1: Flip up the antenna and snap your Quest into the vehicle 
suction mount. Plug the...