Garmin Nuvi 200 W Manual
Have a look at the manual Garmin Nuvi 200 W Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 74 Garmin manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
nüvi 200 and 200W series owner’s manual 2 Appendix Appendix Avoiding Theft To avoid theft, remove the unit and mount from sight when not in use. Remove the residue left on the windshield by the suction cup. Do not keep your unit in the glove compartment. Register your product at http://my.garmin.com. Use the Garmin Lock feature. • • • • Locking Your nüvi Garmin Lock is a theft-deterrent system that locks your nüvi. Each time you turn on the nüvi, enter the PIN or drive to the security location. 1. Touch Tools > Settings > Security. 2. Touch the button below Garmin Lock. 3. Enter a 4-digit PIN and drive to a security location. Your security location should be a location you return to often, such as your home. If the nüvi has satellite signals and you are at the security location, you do not need to enter the PIN.
26 nüvi 200 and 200W series owner’s manual Appendix nOTE: If you forget your PIN and your security location, you must send your nüvi to Garmin to get it unlocked. You must also send a valid product registration or proof of purchase. Calibrating the Screen If the touch screen is not responding properly, calibrate the touch screen. 1. Turn off the nüvi. 2. Turn on the nüvi and hold the Power key to the left for about 30 seconds until the calibration screen appears (white screen with “Press dot”). Resetting Your nüvi If your nüvi stops responding, turn the nüvi off, and then turn it back on. If this does not help, reset your nüvi. Depending on your nüvi model, you can reset your nüvi one of two ways: Press and hold the Reset button on the bottom of the nüvi for several seconds. CaUTiOn: Do not reset your nüvi with a ballpoint pen or other sharp object, which can damage the unit or the battery. If your nüvi does not have a Reset button, slide the Power key to the left and hold it for 8 seconds. • •
nüvi 200 and 200W series owner’s manual 2 Appendix Updating the Software 1. Go to www.garmin.com /products/webupdater, and download WebUpdater to your computer. 2. Connect the nüvi to your computer using the mini-USB cable. 3. Run WebUpdater, and follow the on-screen instructions. After confirming that you want to perform an update, WebUpdater automatically downloads the update and installs it on your nüvi. Clearing User Data CaUTiOn: This deletes all user-entered information. 1. Hold your finger on the lower- right corner of the nüvi screen while turning on the nüvi. 2. Keep your finger pressed until the pop-up window appears. 3. Touch Yes to clear all user data. All original settings are restored. Any items that you have saved are erased.
2 nüvi 200 and 200W series owner’s manual Appendix Battery Information To maximize the lifetime of the battery, do not leave your nüvi in direct sunlight, and avoid prolonged exposure to excessive heat. The battery icon in the corner of the Menu page indicates the status of the nüvi battery. To increase the accuracy of the battery gauge, fully discharge the battery and then fully charge it. Do not unplug the nüvi until it is totally charged. Charging Your nüvi Connect the vehicle power cable to the mini-USB connector on your nüvi and to a power outlet in your vehicle. The vehicle key may need to be turned to ON/ ACC for the nüvi to charge. Connect an AC adapter (optional accessory) to the nüvi and a wall outlet. Connect your nüvi to a computer using a USB cable (optional accessory). The computer must be on for the nüvi to charge. • • •
nüvi 200 and 200W series owner’s manual 2 Appendix Changing the Fuse CaUTiOn: When replacing the fuse, do not lose any of the small pieces and make sure they are put back in the proper place. If your unit will not charge in your vehicle, you might need to replace the fuse located at the tip of the vehicle adapter. 1. Unscrew the black, round end piece, and remove it. 2. Remove the fuse (glass and silver cylinder), and replace it with a 3 A fast-blow fuse. 3. Ensure that the silver tip is placed in the black end piece. Screw on the black end piece. Removing the nüvi and Mount To remove the nüvi from the cradle, hold onto the cradle and tilt the nüvi forward. To remove the cradle from the mount, turn the cradle to the right or left. Apply pressure in that direction until the cradle snaps off the mount. To remove the suction cup mount from the windshield, flip the lever toward you. Pull the tab on the suction cup toward you. End piece Silver tip Fuse End piece Silver tip Fuse
0 nüvi 200 and 200W series owner’s manual Appendix Mounting on Your Dashboard Use the enclosed mounting disk to mount your unit to the dashboard and comply with certain state regulations. CaUTiOn: The permanent mounting adhesive is extremely difficult to remove after it is installed. 1. Clean and dry the dashboard where you are placing the disk. 2. Remove the backing from the adhesive on the bottom of the disk. 3. Place the disk on the dashboard. 4. Remove the clear plastic cover from the top of the disk. 5. Place the suction cup mount on top of the disk. Flip the lever down (toward the disk). Additional Maps You can purchase additional MapSource map data from Garmin and load the maps in your nüvi internal memory or on an optional memory card. To determine the versions of the maps that are loaded on your nüvi, open the Menu page. Touch Tools > Settings > Map > Map info. Check http://my.garmin.com/maps/updates .htm to see if an update for your map software is available. To enable additional maps, you need your unit ID (see page 20) and serial number (located near the power connector). To load maps or waypoints in your nüvi memory or on your memory card, select the name for your nüvi
nüvi 200 and 200W series owner’s manual Appendix drive or memory card drive. Refer to the MapSource Help file for more information. About GPS Satellite Signals Your nüvi must acquire GPS (Global Positioning System) satellite signals in order to navigate. If you are indoors, near tall buildings or trees, or in a parking garage, your nüvi may not acquire satellites. Go outside to an area free from tall obstructions to use your nüvi. When your nüvi has acquired satellite signals, the signal strength bars on the Menu page are green . When it loses satellite signals, the bars turn red or clear . For more information about GPS, go to www.garmin.com/aboutGPS. Extras and Optional Accessories For more information about optional accessories, go to http://buy.garmin .com or www.garmin.com/extras, or contact your Garmin dealer. Custom Points of Interest Use the POI Loader to load custom points of interest (POIs) onto your nüvi. POI databases are available from various companies on the Internet. Some custom databases contain alert information for points, such as safety cameras and school zones. Go to www.garmin.com/extras, and click POI Loader to install the POI Loader onto your computer. For more information, refer to the POI Loader Help file. Press F1 to open the Help file.
2 nüvi 200 and 200W series owner’s manual Appendix To view your Custom POIs, touch Where to? > Extras > Custom POis . To change the proximity alert settings, touch Tools > Settings > Proximity Points > Proximity alerts . To delete the Custom POIs from your nüvi, connect your nüvi to your computer. Open the Garmin\ poi folder in the nüvi drive or the memory card drive. Delete the file titled poi.gpi. Safety Cameras Safety camera information is available in some locations. Check http://my.garmin.com for availability. For these locations, the nüvi includes the locations of hundreds of safety cameras. Your nüvi alerts you when you are approaching a safety camera and can warn you if you are driving too fast. The data is updated at least weekly, so you always have access to the most up-to-date information. You can purchase a new region or extend an existing subscription at any time. Each region that you purchase has its own expiration date. CaUTiOn: Garmin is not responsible for the accuracy of, or the consequences of using, a custom POI or safety camera database.
nüvi 200 and 200W series owner’s manual Appendix Garmin Travel Guide Much like a paper travel guide, the Garmin Travel Guide provides detailed information about places, such as restaurants and hotels. To purchase an accessory, go to http://buy.garmin.com or contact your Garmin dealer. To use the travel guide, insert the memory card into your nüvi. Touch Where to? > Extras. Touch the name of your travel guide to open it. Contact Garmin Contact Garmin Product Support if you have any questions while using your nüvi. In the USA, go to www.garmin.com/support, or contact Garmin USA by phone at (913) 397- 8200 or (800) 800-1020. In the UK, contact Garmin (Europe) Ltd. by phone at 0808 2380000. In Europe, go to www.garmin.com /support and click Contact Support for in-country support information, or contact Garmin (Europe) Ltd. by phone at +44 (0) 870.8501241.
nüvi 200 and 200W series owner’s manual Appendix Specifications nüvi 200 Series Physical size W × H × D: 3.8 × 2.8 × 0.8 in. (97 × 71 × 20 mm) Weight: 5.2 oz. (147.42 g) Display: 3.5" diagonal, 320 × 240 pixels; 64K colors; bright QVGA TFT landscape display; white backlight; touch screen Case: Not waterproof (IPXO) Operating temperature range: 32°F–140°F (0°C–60°C) Charging temperature range: 32°F–113°F (0°C–45°C) Data storage: Internal memory and optional removable microSD or SD card. Data stored indefinitely. Computer interface: USB 2.0 full speed mass storage Operating system: Garmin Charge time: Approximately 4 hours Power input: Vehicle power using included vehicle power cable or AC power using an optional accessory Usage: 5 W max. Battery life: Up to 4 hours Battery type: Non-user-replaceable rechargeable lithium-ion battery gPS receiver : High-sensitivity acquisition times *: Warm: