Garmin G500 Manual

5-5190-01102-02  Rev. DGarmin G500 Pilot’s Guide
ForewordSec 1 
System Sec 2 
PFD Sec 3 
MFD Sec 4 
Hazard 
Avoidance
Sec 5 
Additional  Features Sec 6 
Annun. 
& Alerts Sec 7 
Symbols Sec 8 
Glossary Appendix A Appendix B 
Index
4)   Press ENT to accept and view the selected chart. 
Figure 5-5  Selected Chart for the Current Airport (ChartView shown)
5) Press the  Select key to choose another chart. Press the  Back key to return to 
the view of the full chart.  

5-6Garmin G500 Pilot’s Guide190-01102-02  Rev. D
Foreword
Sec 1 
System
Sec 2 
PFD
Sec 3 
MFD
Sec 4 
Hazard 
Avoidance
Sec 5 
Additional  Features
Sec 6 
Annun. 
& Alerts
Sec 7 
Symbols
Sec 8 
Glossary
Appendix A
Appendix B 
Index
5.1.3  Selecting a Chart by Identifier
A  chart  for  a  different  airport  may  be  chosen  by  selecting  the  identifier  for 
the desired airport. 
Airport Identifier Selection
Figure 5-6  Airport Identifier Selection
1)  While viewing the Charts page of the FPL page...

5-7190-01102-02  Rev. DGarmin G500 Pilot’s Guide
ForewordSec 1 
System Sec 2 
PFD Sec 3 
MFD Sec 4 
Hazard 
Avoidance
Sec 5 
Additional  Features Sec 6 
Annun. 
& Alerts Sec 7 
Symbols Sec 8 
Glossary Appendix A Appendix B 
Index
5.1.4  Selecting a New Chart by FPL, NRST , or 
RECENT
You  may  select  other  charts  to  display  based  on  your  flight  plan  (FPL), 
charts  of  the  nearest  airport  (NRST),  or  your  most  recently  selected  airports 
(RECENT). 
Figure 5-7  Chart Category Selection...

5-8Garmin G500 Pilot’s Guide190-01102-02  Rev. D
Foreword
Sec 1 
System
Sec 2 
PFD
Sec 3 
MFD
Sec 4 
Hazard 
Avoidance
Sec 5 
Additional  Features
Sec 6 
Annun. 
& Alerts
Sec 7 
Symbols
Sec 8 
Glossary
Appendix A
Appendix B 
Index
5.1.5  Charts Menu Selections
1) In the FPL page group, turn the small MFD knob to reach the Charts page. 
2)  Press MENU to display the Options menu. 
Figure 5-8  Chart Menu Selections
3) Turn the large MFD knob to select the desired item and then press ENT. 
5.1.5.1  Setting...

5-9190-01102-02  Rev. DGarmin G500 Pilot’s Guide
ForewordSec 1 
System Sec 2 
PFD Sec 3 
MFD Sec 4 
Hazard 
Avoidance
Sec 5 
Additional  Features Sec 6 
Annun. 
& Alerts Sec 7 
Symbols Sec 8 
Glossary Appendix A Appendix B 
Index
 NOTE:   If you highlight the Minimums Altitude field on the FPL page and 
press the CLR key, it will turn the minimums functionality off. 
5.1.5.2  Viewing Chart NOTAMs
If  an  active  NOTAM  (Notice  to  Airmen)  exists  for  the  selected  chart,  the 
NOTAM  soft  key  will...

5-10Garmin G500 Pilot’s Guide190-01102-02  Rev. D
Foreword
Sec 1 
System
Sec 2 
PFD
Sec 3 
MFD
Sec 4 
Hazard 
Avoidance
Sec 5 
Additional  Features
Sec 6 
Annun. 
& Alerts
Sec 7 
Symbols
Sec 8 
Glossary
Appendix A
Appendix B 
Index
5)  Press the  small MFD knob or the  ENT key to save the selected value and return 
to the Charts page. 
 NOTE:  Once an adjustment is made to the percentage field in Auto mode, 
the chart must be redrawn (zoomed in or out, or another chart selected) before the switch from...

5-11190-01102-02  Rev. DGarmin G500 Pilot’s Guide
ForewordSec 1 
System Sec 2 
PFD Sec 3 
MFD Sec 4 
Hazard 
Avoidance
Sec 5 
Additional  Features Sec 6 
Annun. 
& Alerts Sec 7 
Symbols Sec 8 
Glossary Appendix A Appendix B 
Index
5.2.1  Cycle Number and Revision
The ChartView  database  is  revised  every  14  days.  Charts  are  still  viewable 
during a period that extends from the cycle expiration date to the disables date. 
ChartView is disabled 70 days after the expiration date and is no longer...

5-12Garmin G500 Pilot’s Guide190-01102-02  Rev. D
Foreword
Sec 1 
System
Sec 2 
PFD
Sec 3 
MFD
Sec 4 
Hazard 
Avoidance
Sec 5 
Additional  Features
Sec 6 
Annun. 
& Alerts
Sec 7 
Symbols
Sec 8 
Glossary
Appendix A
Appendix B 
Index
Power-up Page Display Definition
System time is not available.  
GPS satellite data is unknown 
or the GPS navigator has not 
yet locked onto satellites. Check 
database cycle number for 
effectivity. 
System is verifying chart 
database when new cycle is 
installed for the...

5-13190-01102-02  Rev. DGarmin G500 Pilot’s Guide
ForewordSec 1 
System Sec 2 
PFD Sec 3 
MFD Sec 4 
Hazard 
Avoidance
Sec 5 
Additional  Features Sec 6 
Annun. 
& Alerts Sec 7 
Symbols Sec 8 
Glossary Appendix A Appendix B 
Index
5.2.2  Viewing Chart Details in ChartView
 NOTE:  The  chart  for  the  destination  airport  or  loaded  approach  will 
automatically be selected. 
 NOTE:  Chart details are only available for instrument approach procedure charts.  Chart  details  are  not  available  for...

5-14Garmin G500 Pilot’s Guide190-01102-02  Rev. D
Foreword
Sec 1 
System
Sec 2 
PFD
Sec 3 
MFD
Sec 4 
Hazard 
Avoidance
Sec 5 
Additional  Features
Sec 6 
Annun. 
& Alerts
Sec 7 
Symbols
Sec 8 
Glossary
Appendix A
Appendix B 
Index
4)   Press ENT to accept and view the selected chart. 
Figure 5-13  Selected Chart for the Current Airport (ChartView shown)
5) Press the  Detail key to view detailed views of the current chart. The  Detail key  
is only available with ChartView. 
Figure 5-14  Detail of the...