Garmin G1000 Manual
Here you can view all the pages of manual Garmin G1000 Manual. The Garmin manuals for Integrated Flight Deck are available online for free. You can easily download all the documents as PDF.
Page 651
190-00709-04 Rev. AGarmin G1000 Pilot’s Guide for the Socata TBM 850 637 APPENDIX B DATABASE MANAGEMENT CAUTION: Never disconnect power to the system when loading a database. Power interuption during the database loading process could result in maintenance being required to r\ eboot the system. The system uses Secure Digital (SD) cards to load and store various types of data. For basic flight operations, SD cards are required for database storage as well as Jeppesen navigation and...
Page 652
Garmin G1000 Pilot’s Guide for the Socata TBM 850190-00709-04 Rev. A638 APPENDIX B Figure B-1 Standby Navigation Database Prompt 3) Press the NO Softkey to proceed to loading the active database. 4) A prompt similar to the following is displayed, press the YES Softkey to update the active navigation database. Figure B-2 Database Update Confirmation 5) After the update completes, the display starts in normal mode. Do not remove power while the display is starting. 6) Turn the system OFF and remove...
Page 653
190-00709-04 Rev. AGarmin G1000 Pilot’s Guide for the Socata TBM 850 639 APPENDIX B If a navigation database loader card is inserted into the top SD card slot of a display, and an SD card is in the bottom slot, the system will prompt the user (upon on-ground power up) as to whether the database should be stored on the bottom SD card as the standby database. If the user responds affirmatively, the system will copy the navigation database from the top SD card to the bottom SD...
Page 654
Garmin G1000 Pilot’s Guide for the Socata TBM 850190-00709-04 Rev. A640 APPENDIX B 6) As instructed on the display, press any key to continue. The display will now appear as shown in Figure B-5. Figure B-5 Navigation Database Verification Prompt 7) Press any key to continue. The display will now appear as shown in Figure B-6. Figure B-6 Active Navigation Database Prompt 8) Press the NO Softkey. The display now starts in normal mode. Since the database effective date is not yet valid, it should...
Page 655
190-00709-04 Rev. AGarmin G1000 Pilot’s Guide for the Socata TBM 850 641 APPENDIX B GARMIN DATABASES The following databases are stored on Supplemental Data Cards provided by Garmin: • Expanded After subscribing to the desired database product, these database products will be downloaded and ultimately stored on three Supplemental Data Cards (with the exception of FliteCharts, which is loaded on only one card). Each Supplemental Data Card resides in the bottom card of each display as...
Page 656
Garmin G1000 Pilot’s Guide for the Socata TBM 850190-00709-04 Rev. A642 APPENDIX B The SafeTaxi database contains detailed airport diagrams for selected airports. These diagrams aid in following ground control instructions by accurately displaying the aircraft position on the map in relation to taxiways, ramps, runways, terminals, and services. This database is updated on a 56-day cycle. The FliteCharts database contains procedure charts for the United States only. This database is...
Page 657
190-00709-04 Rev. AGarmin G1000 Pilot’s Guide for the Socata TBM 850 643 APPENDIX B The Display Database Softkey (Figure B-11) is used to place the cursor in the Database Window. Upon first press of the Display Database Softkey, the softkey will change to a selected state (black text on gray background) and the cursor will appear in the Database Window. At this point the user can scroll through all databases in the Database Window to view status information. If the...
Page 658
Garmin G1000 Pilot’s Guide for the Socata TBM 850190-00709-04 Rev. A644 APPENDIX B In some cases it may be necessary to obtain an unlock code from Garmin in order to make the database product functional. It may also be necessary to have the system configured by a Garmin authorized service facility in order to use some database features. After the data has been copied to the appropriate data card, perform the following steps: 1) With system power OFF, remove the MFD database card...
Page 659
190-00709-04 Rev. AGarmin G1000 Pilot’s Guide for the Socata TBM 850 645 APPENDIX B MAGNETIC FIELD VARIATION DATABASE UPDATE A copy of the current magnetic field variation database (MV DB) is included with the navigation database. At startup, the system compares this version of the MV DB with that presently being used by each AHRS (GRS1 and GRS2). If the system determines the MV DB needs to be updated, a prompt is displayed on the Navigation Map Page, as shown in...
Page 660
Garmin G1000 Pilot’s Guide for the Socata TBM 850190-00709-04 Rev. A646 APPENDIX B 3) With ‘OK’ highlighted, press the ENT Key on the MFD. A progress monitor is displayed as shown in Figure B-15. When the upload is complete, the system is ready for use. Figure B-15 Uploading Database to GRS2
All Garmin manuals