Garmin 2508lmtd Manual
Here you can view all the pages of manual Garmin 2508lmtd Manual. The Garmin manuals for GPS Receiver are available online for free. You can easily download all the documents as PDF.
Page 2
All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Garmin. Garmin reserves the right to change or improve its products and to make changes in the content of this manual without obligation to notify any person or organization of such changes or improvements. Go to www.garmin.com for current updates and supplemental information concerning the use of this product. Garmin®, nüvi®, and the Garmin logo are trademarks of Garmin...
Page 3
Table of Contents Getting Started...............................................................1 Connecting the Device to Vehicle Power...................................1 Support and Updates.................................................................1 Setting Up Garmin Express...................................................1 nüMaps Guarantee™............................................................1 Lifetime Subscriptions...........................................................1 Entering...
Page 4
Disabling Calls While Connected to Smartphone Link........10 Garmin Live Services...............................................................10 Subscribing to Garmin Live Services..................................10 About ecoRoute.......................................................................10 ecoRoute HD Accessory.....................................................10 Setting Up the Vehicle.........................................................10 Changing the Fuel...
Page 5
Getting Started WARNING See the Important Safety and Product Information guide in the product box for product warnings and other important information. Connecting the Device to Vehicle Power WARNING This product contains a lithium-ion battery. To prevent the possibility of personal injury or product damage caused by battery exposure to extreme heat, store the device out of direct sunlight. Before you use your device on battery power, you should charge it. 1Plug the vehicle power cable À into the...
Page 6
Automatic volume control lowers the volume of the device when background noise is low and raises the volume level when background noise increases. Enabling Automatic VolumeYour device can increase or decrease the volume automatically based on the level of background noise. 1Select Volume > . 2If necessary, select Automatic Volume. 3Select Enabled. Status Bar Icons The status bar is located at the top of the main menu. The status bar icons display information about features on the device. You can select...
Page 7
1Select View Map. 2Drag and zoom the map to display the area to search. 3If necessary, select , and select a category icon to view only a specific category of places. Location markers ( or a blue dot) appear on the map. 4Select an option: •Select a location marker. •Select a point, such as a street, intersection, or address location. 5If necessary, select the location description to view additional information. Finding an Address NOTE: The order of the steps may change depending on the map data loaded on...
Page 8
1Select Where To? > Saved. 2Select a location. 3Select . 4Select > Edit > Categories. 5Enter one or more category names, separated by commas. 6If necessary, select a suggested category. 7Select Done. Deleting a Saved Location NOTE: Deleted locations cannot be recovered. 1Select Where To? > Saved. 2Select > Delete Saved Places. 3Select the box next to the saved locations to delete, and select Delete. Setting a Simulated Location If you are indoors or not receiving satellite signals, you can use the GPS...
Page 9
Using the Navigation Map 1Select View Map. 2Select anywhere on the map. 3Select an option: •To zoom in or out, select or . •To switch between North Up and 3-D views, select . •To view specific categories when not navigating a route, select . •To center the map on your current location, select . Adding a Point to a Route Before you can add a stop, you must be navigating a route. 1From the map, select > Where To?. 2Search for the extra stop. 3Select the stop from the search results. 4Select Go!. 5Select...
Page 10
Viewing the Trip Log Your device keeps a trip log, which is a record of the path you have traveled. 1Select Settings > Map & Vehicle > Map Layers. 2Select the Trip Log check box. Resetting Trip Information 1From the map, select Speed . 2Select > Reset Field(s). 3Select an option: •When not navigating a route, select Select All to reset every data field except the speedometer, on the first page. •Select Reset Trip Data to reset the information on the trip computer. •Select Reset Max. Speed to reset the...