FUNAI Lh8 M26bb Owners Manual

11EN
SETUP FOR USE
Initial Setting
You need to set the followings to use the unit appropriately for the 
first time you turn on the unit.
1)Press [Q(standby-on)] to turn on the unit.
 “Initial Setup” language menu will appear.
2)Press [K / L] repeatedly to select the menu language you 
want, then press [OK].
3)Press [K / L] to select the country you want, then press 
[OK].
 Scan confirmation menu will appear.
4)Press [K / L] to select “Scan”, then press [OK].
 Channel scanning will start...

12EN
OPERATIONS
Watching a TV Programme
To select a channel
Press [/] repeatedly to select your desired channel.
or
Press [the Number buttons] to enter a channel number then 
[OK] for quicker access.
 If you want to select the channel 24 without pressing [OK], 
press [2] first, then press [4] within 3 seconds.
To adjust the volume
Press [+/–] to adjust the audio volume.
 You can see the volume bar while adjusting the volume.
Press [ (mute)] to turn on or off the sound right away.
 You can recover the...

13EN
Sound Select
1)Press [SOUND] to display the currently selected audio 
language and the number of available languages.
2)Press [SOUND] repeatedly to cycle through the available 
audio languages and audio recording format.
1)Press [SOUND] to display the currently selected audio 
mode.
2)Press [SOUND] repeatedly to cycle through the available 
audio mode.
TV Screen Information
You can see the broadcasting information.
1)Press [I(information)].
 Fewer information menu will appear.
2)Press...

14EN
EPG (Electronic Programme Guide)
You can easily find a channel or see the detailed channel 
information. EPG gives you scheduled information of the TV 
programmes.
1)Press [GUIDE].
 EPG will appear.
2)Press [K / L] to select a channel, then press [1].
 Press [RED] or [GREEN] to move the channel list to the 
previous or next page.
 Press [OK] to watch the selected channel.
3)Press [K / L] to select a programme.
 Press [RED] or [GREEN] to move the programme list to the 
previous or next day.
...

15EN
Changing the TV Screen Display Mode
You can select your favourite TV screen size.
Press [ASPECT] repeatedly to switch the TV screen display 
mode.
For SD (Standard Definition) video signal
“Auto”
Selects the TV screen display mode automatically.
This is the default.
“Sidebar”
Displays a 4:3 picture at its original size. Sidebars appear on both 
edge of the TV screen.
“Full”
Displays a 4:3 picture at a 16:9 size; the picture is stretched 
horizontally to fill the TV screen.
“Cinema”
Displays a 4:3...

16EN
OTHER SETTINGS
Picture Adjustment
You can adjust the picture settings according to your personal 
preference. These settings are automatically stored after exiting the 
picture menu.
1)Press [MENU] to display the menu.
2)Press [K / L] to select “Picture”, then press [OK].
“Picture Mode”
3)Press [K / L] to select “Picture Mode”.
4)Press [0 / 1] to select the setting (“Standard, Dynamic, 
Movie, News, Personal”) you want.
“Brightness, Contrast, Colour, Hue, Sharpness”
3)Press [K / L] to select the...

17EN
Advanced Picture Adjustment
You can adjust the detailed picture settings according to your 
personal preference.
1)Press [MENU] to display the menu.
2)Press [K / L] to select “Picture”, then press [OK].
3)Press [K / L] to select “Features”, then press [OK].
 “Features” menu will appear.
“DNR (Digital Noise Reduction)”
You can adjust to reduce the appearance of digitizing error caused 
by the compression.
4)Press [K / L] to select “DNR”.
5)Press [0 / 1] to select the setting (“Low, Mid, High”) you...

18EN
PC Settings
You can adjust the PC screen position, clock and phase. Make sure 
your PC is connected.
1)Press [MENU] to display the menu.
2)Press [K / L] to select “Picture”, then press [OK].
3)Press [K / L] to select “PC Settings”, then press [OK].
“Auto Adjustment”
4)Press [K / L] to select “Auto Adjustment”, then press [OK].
 Each setting will be adjusted automatically.
“H.Position, V.Position, Phase, Clock”
4)Press [K / L] to select the item you want, then press [OK].
5)Press [0 / 1] to adjust,...

19EN “Digital Audio Output”
You can set the audio output to “Auto” or “PCM”.
3)Press [K / L] to select “Digital Audio Output”.
4)Press [0 / 1] to select the setting (“Auto, PCM”) you want.
“Auto Volume Control”
You can set to keep a constant loudness differential between the 
TV commercials and the programs.
3)Press [K / L] to select “Auto Volume Control”.
4)Press [0 / 1] to select the setting (“On, Off ”) you want.
“Assistive Services”
You can adjust the audio type.
3)Press [K / L] to select “Assistive...

20EN
Audio Language Selection
You can select the main language.
1)Press [MENU] to display the menu.
2)Press [K / L] to select “TV”, then press [OK].
“Audio Language”
3)Press [K / L] to select “Audio Language”.
4)Press [0 / 1] to select the language you want.
“Audio Language 2nd”
3)Press [K / L] to select “Audio Language 2nd”.
4)Press [0 / 1] to select the language you want.
5)Press [MENU] to exit.
“Audio Channel”
3)Press [K / L] to select “Audio Channel”.
4)Press [0 / 1] to select the setting (“Dual1,...