Fujitsu P63xha51 Users Manual

E-11
English
Deutsch
Espa
ñol
Fran
çais
Italiano
Portugu
ês
日 本 語
Póññêèé
中文
BASIC OPERATIONS
TURNING THE POWER ON AND STAND-BY
1
Press/I to the left at the bottom of the display to the ONstate.
The power lamp lights up.
2
Press  on the remote control.
The color of the power lamp changes from “Red” to “Green”.
3
Press  –  or ).
Select the video mode to input.
4
Press  when the power is ON.
The color of the power lamp changes from “Green” to “Red” and the the power turns “OFF (Stand-
by state)”....

E-12
BASIC OPERATIONS (Continued)
RGB INPUT MODE
1
Press ) to select the input mode.
You can select RGB1.
• RGB1: mD-sub
* For selection of the input terminal, see  
“SETTING THE INPUT TERMINALS” on 
P. E-22.
CONVENIENT FUNCTIONS
On-screen information
Press 3.
The mode is indicated on the screen for 5 seconds.
Picture Mode
Press 4.
This button can be used to switch the picture mode.
In the picture mode, you can switch between the set status and the fine mode.
* For the picture mode settings, see “Picture...

E-13
English
Deutsch
Espa
ñol
Fran
çais
Italiano
Portugu
ês
日 本 語
Póññêèé
中文
WATCHING PICTURES ON THE WIDE SCREEN
SWITCHING BETWEEN SCREEN SIZES
1
Press .
The currently selected mode will appear.
2
Press  to select a desired Screen 
Size.
Each time you press , a different Screen Size 
appears.  The sequences used are as follows:
 When you are in a Video input mode
When you are in an RGB input mode
* Depending on the type of signal, some aspects 
may not be selected.
* You can also use the buttons 
on...

E-14
WATCHING PICTURES ON THE WIDE SCREEN (Continued)
Normal (Video/RGB)
Displays pictures of normal size (i.e., a 4:3 aspect ratio).
Wide1 (Video)
Displays natural-looking pictures of standard size on the wide screen.
Wide2 (Video)/Wide (RGB)
Ideal for displaying vertically extended pictures such as squeezed pictures.
Zoom1 (Video)/Zoom (RGB)
Enlarges horizontally extended pictures equally in all directions to maintain the aspect 
ratio constant.
Zoom2 (Video)
Reduces the height of horizontally extended...

E-15
English
Deutsch
Espa
ñol
Fran
çais
Italiano
Portugu
ês
日 本 語
Póññêèé
中文
ADJUSTMENT MENU
The numbers in parentheses (   ) indicate the reference page numbers.
Note
• Some type of signal can not be selected.
MENU
PICTURE (E-16) Signal Contrast (E-17)
Drive Contrast (E-17)
Brightness (E-17)
Color (E-17)
Tint (E-17)
Sharpness (E-17)
Ambient Sensor (E-17)
Picture Mode (E-18)
Color Temp. (E-18)
Picture Memory (E-18)
Default
POSITION/SIZE (E-19) Position (E-19)
Size (E-19)
Default
AUDIO (E-20) Treble...

E-16
BASIC PROCEDURE OF ADJUSTMENT MENU
• Shown below is the basic procedure used to change the options on the ADJUSTMENT MENU. (Ex.: Adjusting tint setting (Tint))
Selecting the adjustment mode for adjustment or setting. (The items to be adjusted or set are stored for each adjustment mode.)
1
Press ;.
The main menu screen will appear.
2
Press E or F to select “PICTURE”.
Each time you press E or F, one of the available 
menus appears in the following sequence:
PICTURE < POSITION/SIZE < AUDIO < FEATURES...

E-17
English
Deutsch
Espa
ñol
Fran
çais
Italiano
Portugu
ês
日 本 語
Póññêèé
中文
ADJUSTING THE PICTURE
• Picture-related items can be set and adjusted in the Picture Adjustment Screen. See BASIC PROCEDURES OF ADJUSTMENT MENU 
on page E-16 for the basic procedures.
Signal Contrast
Press F to increase the input signal contrast.
Press 
E to reduce the input signal contrast.
Press 
< to store.
Drive Contrast
Press F to raise the display’s luminance level, and increase the contrast.
Press 
E to lower the...

E-18
ADJUSTING THE PICTURE (Continued)
Picture Mode
Each time you press E or F, the available choices appear in the following sequence.
<
 Natural < Fine < Effective < Conventional < Still < 
Press < to store.
Color Temp.
“Color Temperature” can be set.
Each time 
E or F is pressed, the color temperature mode is switched as shown below.
<
 Warm < Standard < Cool < 
[Warm]: More reddish colors
[Cool]: More bluish colors
Press 
< to store.
Picture Memory
Eight groups of picture adjustment settings can be...

E-19
English
Deutsch
Espa
ñol
Fran
çais
Italiano
Portugu
ês
日 本 語
Póññêèé
中文
ADJUSTING SCREEN POSITION AND SIZE 
• You can make changes to all screen adjustment options in the POSITION/SIZE Menu. See Page 
E-16 for the basic procedures.
• The changes you make will be stored for the selected input mode.  Therefore, you need to select a 
desired input mode before making any changes.
Screen Position
Horizontal position (Horizontal)
F: Moves screen to the right.
E: Moves screen to the left.
Vertical position...

E-20
ADJUSTING AUDIO
• You can make changes to all audio adjustment options in the AUDIO Menu. See Page E-16 for the basic procedures.
• The changes you make will be stored for the selected input mode.  Therefore, you need to select a desired input mode before making any 
changes.
Treble
Press EF to make adjustments.
F: Stronger treble
E: Weaker treble
Press 
< to store.
Bass
Press EF to make adjustments.
F: Stronger bass
E: Weaker bass
Press 
< to store.
Balance
Press EF to make adjustments.
F: Shifts...