Fujitsu P63xha30 Users Manual

							E-11
English
Model P50XHA30W/A
Screen size 50 wide screen:
110.6 cm (W) x 62.2 cm (H) (126.9 cm diagonal)43.5 inch (W) x 24.5 inch (H) (50 inch diagonal)
Aspect ratio 16:9 (wide)
Weight 45 kg / 99 lbs
Outer dimensions 121.4 (W) x 72.8 (H) x 9.8 (D) cm
47.8 (W) x 28.7 (H) x 3.9 (D) inch  (does not include outer projections)
Power supply 110–240 VAC 50/60 Hz
Current rating 5.2–2.1 A
Number of pixels 1366 (H) x 768 (V)
External equipment terminals
Video input terminals VIDEO1 INPUT (Video input) 1 RCA terminal 1 Vp-p/75 Ω
VIDEO2 INPUT (S-video input) 1 S terminal Y: 1 Vp-p/75 Ω
C: 0.286 Vp-p/75 Ω
VIDEO3/VIDEO4 INPUT 3 RCA terminals Y: 1 Vp-p/75 Ω
(Component video input) P
B/CB:0.7 Vp-p/75 Ω
P
R/CR:0.7 Vp-p/75 Ω
Applicable systems NTSC/PAL/SECAM/PAL60/N-PAL/M-PAL/4.43NTSC
PC input terminal RGB1 input 1 DVI-D terminal (EIA/CEA-861B Compliant)
RGB2 input mD-sub, 3 rows, 15-pin
Picture signal: 0.7 Vp-p/75 Ω
Synchronization signal:TTL level
Audio terminals 2 audio input pin jacks (L/R)  (3 lines)
500 mVrms/at least 22 kΩ
Control terminal 1 RS-232C connector (D-sub 9-pin)
External speaker output terminalEffective max. output: 10 W + 10 W (EIAJ), 6 Ω
Operating conditions Temperature: 0 to 40 °C / 32 to 104 °F
Humidity: 20 to 80 %
Accessories 1 remote control, 2AA batteries, 2 user’s manuals, 1 power cable, 2 big ferrite cores,
2 small ferrite cores
– – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – –
Regulation
• UL, CSA Safety: UL6500, C-UL
EMC: FCC Part 15 Class B, ICES-003 Class B
•CESafety: EN60065
EMC: EN55022 1998, Class B
EN61000-3-2 1995
EN61000-3-3 1995
EN55024 1998
EN61000-4-2 1995
EN61000-4-3 1996
EN61000-4-4 1995
EN61000-4-5 1995
EN61000-4-6 1996
EN61000-4-8 1993
EN61000-4-11 1994
•ASSafety: IEC60065
EMC: AS/NZS 3548
•Viewing the screen constantly for extended periods can strain your eyes.  Be sure to stay at a proper distance (at least 1.9 m or 6.2 feet for 50”) from
the screen and to look occasionally away while working.

&.)%
	
03.12.17, 12:45 Page 11EPCF
1BHF.BLFS
+11$
 
						

							E-12
SPECIFICATION (Continued)
Model P42VHA30W/A P42VHA31W/A P42HHA30W/A
Screen size 42 wide screen: 42 wide screen:
92.1 cm (W) x 51.8 cm (H) (105.7 cm diagonal) 92.2 cm (W) x 52.2 cm (H) (106.0 cm diagonal)36.3 inch (W) x 20.4 inch (H) (41.6 inch diagonal)36.3 inch (W) x 20.6 inch (H) (41.7 inch diagonal)
Aspect ratio 16:9 (wide)
Weight 30 kg / 66 lbs
Outer dimensions 103.7 (W) x 64.2 (H) x 8.5 (D) cm
40.8 (W) x 25.3 (H) x 3.3 (D) inch  (does not include outer projections)
Power supply 110–240 VAC 50/60 Hz
Current rating 3.5–1.35 A 4.2–1.7 A 4.0–1.95 A
Number of pixels 852 (H) x 480 (V) 1024 (H) x 1024 (V)
External equipment terminals
Video input terminals VIDEO1 INPUT (Video input) 1 RCA terminal 1 Vp-p/75 Ω
VIDEO2 INPUT (S-video input) 1 S terminal Y: 1 Vp-p/75 Ω
C: 0.286 Vp-p/75 Ω
VIDEO3/VIDEO4 INPUT 3 RCA terminals Y: 1 Vp-p/75 Ω
(Component video input) P
B/CB:0.7 Vp-p/75 Ω
P
R/CR:0.7 Vp-p/75 Ω
Applicable systems NTSC/PAL/SECAM/PAL60/N-PAL/M-PAL/4.43NTSC
PC input terminal RGB1 input 1 DVI-D terminal (EIA/CEA-861B Compliant)
RGB2 input mD-sub, 3 rows, 15-pin
Picture signal: 0.7 Vp-p/75 Ω
Synchronization signal:TTL level
Audio terminals 2 audio input pin jacks (L/R)  (3 lines)
500 mVrms/at least 22 kΩ
Control terminal 1 RS-232C connector (D-sub 9-pin)
External speaker output terminalEffective max. output: 10 W + 10 W (EIAJ), 6 Ω
Operating conditions Temperature: 0 to 40 °C / 32 to 104 °F
Humidity: 20 to 80 %
Accessories 1 remote control, 2AA batteries, 2 user’s manuals, 1 power cable, 2 big ferrite cores,
2 small ferrite cores
– – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – –
Regulation
• UL, CSA Safety: UL6500, C-UL
EMC: FCC Part 15 Class B, ICES-003 Class B
•CESafety: EN60065
EMC: EN55022 1998, Class B
EN61000-3-2 1995
EN61000-3-3 1995
EN55024 1998
EN61000-4-2 1995
EN61000-4-3 1996
EN61000-4-4 1995
EN61000-4-5 1995
EN61000-4-6 1996
EN61000-4-8 1993
EN61000-4-11 1994
•ASSafety: IEC60065
EMC: AS/NZS 3548
•Specifications and external appearance may be change for the sake of improvement.
•Viewing the screen constantly for extended periods can strain your eyes.  Be sure to stay at a proper distance (at least 1.6 m or 5.2 feet for 42”) from
the screen and to look occasionally away while working.
•is a worldwide trademark of Fujitsu General Limited and is a registered trademark in Japan, the U.S.A. and other countries or areas.

&.)%
	
03.12.19, 7:07 PM Page 12EPCF
1BHF.BLFS
+11$
 
						

							Before using the display, read the User’s manual (1/2) and the User’s manual (2/2) carefully so that you know how
to use the display correctly.
Refer to these manuals whenever questions or problems about operation arise. Be sure to read and observe the
safety precautions.
Keep these manuals where the user can access them readily.
*Installation and removal require special expertise.  Consult your product dealer for details.
Contents
USER’S MANUAL (2/2)
(Precautions and Adjustment Methods)
WIDE PLASMA DISPLAY
Before Use
•Safety Precautions ···························································································· E-2–E-3
Usage
•Handy Tips ················································································································· E-4
•Connecting the Display to External Equipment ·············································· E-5–E-8
•Using the Remote Control ·············································································· E-9–E-11
•Basic Operations ··························································································· E-12–E-13
•Selecting Input Mode ······························································································ E-14
•
Other Basic Operations ··································································································E-15
•Watching Pictures on the Wide Screen ······················································· E-16–E-17
Adjustments
•Adjustment Menu ··································································································· E-18
•Adjusting Pictures (PICTURE Menu) ···························································· E-19–E-21
•Adjusting Screen Position and Size (POSITION/SIZE Menu) ···················· E-22–E-23
•Adjusting Audio (AUDIO Menu) ·································································· E-24–E-25
•
Other Adjustments (FEATURES Menu) ································································E-26–E-32
•Initialization of User Adjustment Value (FACTORY DEFAULT) ···························· E-33
•Cleaning and Maintenance ····················································································· E-34Page
English

&1MBTNBXJEF
	IZP
03.10.3, 0:12 PM Page 1EPCF
1BHF.BLFS
+11$
 
						

							E-2
SAFETY PRECAUTIONS
IMPORTANT INFORMATION
WARNING:This is a Class A and Class B product.  In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures.
WARNING:TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS
PRODUCT TO RAIN OR MOISTURE.
FCC NOTICE
•A Class A digital device
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.  These
limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial
environment.  This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be required to correct the interference at his own expense.
•A Class B digital device
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.  These
limits are designed to provide reasonable protection against harmful interference in a residential installation.  This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications.  However, there is no guarantee that interference will not occur in a particular installation.  If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
–Reorient or relocate the receiving antenna.
–Increase the separation between the equipment and receiver.
–Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
–Consult the dealer or an experienced radio/TV technician for help.
IMPORTANT SAFETY INSTRUCTIONS
Electrical energy can perform many useful functions.  This unit has been engineered and manufactured to assure your personal safety.  But
IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE HAZARD.  In order not to defeat the safeguards
incorporated into this product, observe the following basic rules for its installation, use and service.  Please read these “Important
Safeguards” carefully before use.
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifier’s) that produce heat.
9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A
grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the
provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit
from the apparatus.
11) Only use attachments/accessories specified by the manufacturer.
The lightning flash with arrowhead symbol, within
an equilateral triangle, is  intended to alert the user
 to the presence of uninsulated “dangerous voltage”
within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electric
shock to persons.The exclamation point within an equilateral triangle
is intended to alert the user to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the
appliance.CAUTION:
TO PREVENT  THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR
BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
IMPORTANT

&1MBTNBXJEF	@
03.10.3, 0:13 PM Page 2EPCF
1BHF.BLFS
+11$
 
						

							E-3
English
12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus.
When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
13) Unplug this apparatus during lightning storms or when unused for long periods of time.
14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any
way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, dose not operate normally, or has been dropped.
–Unplug this product from the wall outlet before cleaning.  Do not use liquid cleaners or aerosol cleaners.  Use a damp cloth for cleaning.
–Do not use attachments not recommended by the product manufacturer as they may cause hazards.
–Do not use immediately after moving from a low temperature to high temperature, as this causes condensation, which may result in fire,
electric shock, or other hazards.
–The apparatus shall not be exposed to dripping or splashing.
–No objects filled with liquids, such as vases, shall be placed on the apparatus.
–Do not place this product on an unstable cart, stand, or table.  The product may fall, causing serious injury to a child or adult, and serious
damage to the product.  The product should be mounted according to the manufacturer’s instructions, and should use a mount
recommended by the manufacturer.
–When the product is used on a cart, care should be taken to avoid quick stops, excessive force, and uneven surfaces which may cause the
product and cart to overturn, damaging equipment or causing possible injury to the operator.
–Slots and openings in the cabinet are provided for ventilation.  These ensure reliable operation of the product and protect it from
overheating.  These openings must not be blocked or covered.  (The openings should never be blocked by placing the product on bed,
sofa, rug, or other similar surface.  It should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is
provided and the manufacturer’s instructions have been adhered to.)
For proper ventilation, separate the product from other equipment, which may prevent ventilation, and keep distance more than 10 cm.
–This product should be operated only from the type of power source indicated on the label.  If you are not sure of the type of power
supply of your home, consult your product dealer or local power company.
–This product is equipped with a three-wire plug.  This plug will fit only into a grounded power outlet.  If you are unable to insert the plug
into the outlet, contact your electrician to install the proper outlet.  Do not defeat the safety purpose of the grounded plug.
–Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them.  Pay
particular attention to cords at doors, plugs, receptacles, and the point where they exit from the product.
–For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it
from the wall outlet and disconnect the cable system.  This will prevent damage to the product due to lightning and power line surges.
–Do not overload wall outlets, extension cords, or convenience receptacles on other equipment as this can result in a risk of fire or electric
shock.
–Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short out parts that
could result in a fire or electric shock.  Never spill liquid of any kind on the product.
–Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltages and other hazards.
Refer all service to qualified service personnel.
–
Unplug this product from the wall outlet and refer service to qualified service personnel if the product does not operate normally by following
the operating instructions.  Adjust only those controls that are covered by the Operation Manual, as an improper adjustment of other controls
may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation.
–When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or with
same characteristics as the original part.  Unauthorized substitutions may result in fire, electric shock, or other hazards.
–Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the
product is in proper operating condition.
–The product should be placed more than one foot away from heat sources such as radiators, heat registers, stoves, and other products
(including amplifiers) that produce heat.
–When connecting other products such as VCR’s, and personal computers, you should turn off the power of this product for protection
against electric shock.
–Do not place combustibles behind the cooling fan.  For example, cloth, paper, matches, aerosol cans or gas lighters that present special
hazards when overheated.
–Use only the accessory cord designed for this product to prevent shock.
The power supply voltage rating of this product is AC110–240 V and the power cord attached conforms to the following power supply
voltage.  Use only the power cord designated by our dealer to ensure Safety and EMC.
When it is used with other power supply voltage, the power cable must be changed.
Use the standard power plug and cord set of the specified country.
Consult your product dealer.
Power cord
AC 240 V (SAA TYPE) AC 200–240 V AC 100–125 V Power supply voltage:

&1MBTNBXJEF	@
03.10.3, 0:13 PM Page 3EPCF
1BHF.BLFS
+11$
 
						

							E-4
RECEPTACLE
Make sure that the power cable’s grounding wire is grounded.
The display comes with a 3-prong power plug; one prong is connected to the grounding wire.  If you have only a 2-hole receptacle, you
will need to have it replaced.  Contact your dealer for more information.
•Have the display inspected and cleaned by your dealer at regular intervals.
•Pictures may become “burnt” into the screen phosphors if the screen is left on for extended periods.  To ensure that the display has a
prolonged service life, be sure to use a screen orbiter, white screen.  This will ensure the same picture or pattern is not constantly
displayed for long periods.  (See P. E-31–E-32.)
•The plasma display panel, which is built for maximum precision, provides more than 99.99% effective pixels.  You may find, however,
that some pixels constantly remain lit or dimmed.
•The display has a fan to prevent its internal temperature from rising.
•Be careful with the air delivered by the fan.  It may be very hot.
•Contact your dealer if you find that the display does not seem to function properly when used with other audio-visual equipment.
You may need to move your display if it produces degraded pictures or noise due to electromagnetic radiation, or if the infrared remote
control does not function properly.
•Pictures may not be displayed properly if you connect a non-standard PC to the RGB input terminal.  In this case, contact your dealer
for more information.
•The protective circuit, built into the display, automatically turns off the power if the display has a problem.  In this case, you will see
that the power indicator lamp flashes red or green.
Warning
If the power indicator lamp flashes red or green, this signifies that the display has developed a problem.  When this happens, be sure to
remove the power plug from the receptacle to prevent fire or electric shock.  Then contact your dealer.
HANDY TIPS
Information
Cables for connecting the display to external equipment are not supplied.  Contact your dealer for more information on these products.

&1MBTNBXJEF
	
03.10.3, 0:14 PM Page 4EPCF
1BHF.BLFS
+11$
 
						

							E-5
English
CONNECTING THE DISPLAY TO EXTERNAL EQUIPMENT
EXAMPLE OF CONNECTION TO EXTERNAL COMPONENTS
Remote
control DisplaySpeaker (optional)
Speaker
VCR or other external components See P. 
VCR 
DVD player 
Satellite tuner 
PC 
Be sure to turn OFF the power to the display and external equipment before making any connections.
No cables are supplied with the display for connection to external equipment.  The type of cable to be used varies depending on the PC
model.  Contact your dealer for more information.

&1MBTNBXJEF
	
03.10.3, 0:14 PM Page 5EPCF
1BHF.BLFS
+11$
 
						

							E-6
CONNECTING THE DISPLAY TO EXTERNAL EQUIPMENT (Continued)
VCR
•Connect the video signal cable to either the S-video input terminal or the video input terminal.
To video output
To video input
Bottom of Display
Note
•Unplug the power cord from the AC outlet before you connect external components.
•Also refer to the instructions for the component to be connected.
* When inputting voice see “Selecting input terminals (page E-30)”
*Terminal layout may differ and functions may not be available with some models and some device options.To S-video output
To audio outputs
To audio inputs
To S-video input

&1MBTNBXJEF	@
03.10.3, 0:14 PM Page 6EPCF
1BHF.BLFS
+11$
 
						

							English
E-7
SATELLITE TUNER
•Connect the video signal cable to the component video input terminal, S-video input terminal, or the video input terminal.
•If the component to be connected is equipped with component video output terminal, it is recommended to connect to the component video
terminal.
DVD PLAYER
•Connect the video signal cable to the component video input terminal, S-video input terminal, or the video input terminal.
•If the component to be connected is equipped with component video output terminal, it is recommended to connect to the component video
terminal.
To S-video outputTo component video output
To video output
To audio outputs
To audio
inputsTo video input
To component
video input To S-video input
To S-video outputTo component video output
To video output
To audio outputs
To audio
inputsTo video input
To component
video input To S-video input
Bottom of Display
Bottom of Display

&1MBTNBXJEF	@
03.10.3, 0:14 PM Page 7EPCF
1BHF.BLFS
+11$
 
						

							E-8
 PC
•As the cable for connecting a PC differs with the PC model, please consult your dealer for information on the right cable to purchase.
•The PC can be connected to either the front side or the rear side, whichever is most convenient.
To RGB output (mD-sub)
To audio outputTo RGB output (DVI-D)
To RGB1 input
(DVI-D) To audio
inputTo RGB2
input
(mD-sub)
Note
•Unplug the power cord from the AC outlet before you connect external components.
•Also refer to the instructions for the component to be connected.
* When inputting voice see “Selecting input terminals (page E-30)”
*Terminal layout may differ and functions may not be available with some models and some device options.
Bottom of Display
CONNECTING THE DISPLAY TO EXTERNAL EQUIPMENT (Continued)

&1MBTNBXJEF	@
03.10.3, 0:14 PM Page 8EPCF
1BHF.BLFS
+11$