Fujitsu P55xts51 Users Manual

							E-31
English
Deutsch
Espa
ñol
Fran
çais
Italiano
Portugu
ês
日 本 語
Póññêèé
中文
Normal (Video/RGB)
Displays pictures of normal size (i.e., a 4:3 aspect ratio).
Wide1 (Video)
Displays natural-looking pictures of standard size on the wide screen.
Wide2 (Video)/Wide (RGB)
Ideal for displaying vertically extended pictures such as squeezed pictures.
Zoom1 (Video)/Zoom (RGB)
Enlarges horizontally extended pictures equally in all directions to maintain the aspect 
ratio constant.
Zoom2 (Video)
Reduces the height of horizontally extended pictures with captions, without eliminating 
the caption.  Only the height of pictures is reduced, not the height of the caption.
(Captions may not be easy to read, however, depending on the picture.)
The following aspect ratios are available.
4:3 aspect ratio 16:9 aspect ratio
(VHF/UHF broadcasting, BS broadcasting) (HDTV broadcasting) 
1.85:1 aspect ratio 2.35:1 aspect ratio
(Vista Vision size)  (Cinema Scope size)
SCREEN SIZE
ASPECT RATIO
Picture of 
standard sizeWide1
Vertically 
extended pictureWide2
Horizontally 
extended pictureZoom1
Horizontally extended 
picture with captionZoom2
4
3
16
9
1.85
1
2.35
1
Note
You may find dark areas on top and at the bottom of the screen if you select one of the Zoom modes for media while using the Vista Vision or Cinema 
Scope size i.e., the sizes used frequently for picture software.
• Functions may not be available with some models and some device options.
MHD01862_E.book  31 ページ  ２００５年１１月２５日　金曜日　午後８時５４分
 
						

							E-32
ADJUSTMENT MENU
The numbers in parentheses (   ) indicate the reference page numbers.
MENU
PICTURE (E-33) Signal Contrast (E-34)
POSITION/SIZE (E-36) Drive Contrast (E-34)
AUDIO (E-37) Brightness (E-34)
FEATURES (E-38) Color (E-34)
FACTORY DEFAULT(E-44)Tint (E-34)
Sharpness (E-34)
Ambient Sensor (E-34)
Picture Mode (E-34)
Color Temp. (E-35)
Picture Memory (E-35)
Default
Position (E-36)
Size (E-36)
Default
Treble (E-37)
Bass (E-37)
Balance (E-37)
Loudness (E-37)
Adjustment (E-38) Dot Clock (E-38)
On Screen Menu (E-39) Clock Phase (E-38)
Input Terminal (E-40) Clamp Position (E-38)
Channel Setting (E-40) Auto Calibration (E-38)
Others (E-41)
OSD (E-39)
Language (E-39)
Name Select (E-39)
Video1 (E-40)
Video2 (E-40)
Video3 (E-40)
Video4 (E-40)
Auto Store (E-40)
Manual Store (E-40) Setting (E-40)
Sort (E-41) Name (E-41)
Auto Off-NO SIG. (E-41)
Screen Orbiter (E-42)
Direct Setting (E-42)
Code Setting (E-42)
White Screen (E-42)
Exhibition Mode (E-43)
Information (E-43)
Note
• Some type of signal can not be selected.
MHD01862_E.book  32 ページ  ２００５年１１月２５日　金曜日　午後８時５４分
 
						

							E-33
English
Deutsch
Espa
ñol
Fran
çais
Italiano
Portugu
ês
日 本 語
Póññêèé
中文
BASIC PROCEDURE OF ADJUSTMENT MENU OPERATIONS
• Below is shown the basic procedure to make changes to the options in the ADJUSTMENT MENU. (Ex.: adjusting tint setting (Tint))
1
Press ;.
The main menu screen will appear.
2
Press E or F to select “PICTURE”.
Each time you press E or F, one of the available 
menus appears in the following sequence:
PICTURE < POSITION/SIZE < AUDIO < FEATURES < 
FA C TO RY  D E FA U LT
The PICTURE Menu screen will appear.
3
Press C or D to select “Tint”.
4
Press 
						

							E-34
ADJUSTING THE PICTURE
• Picture-related items can be set and adjusted in the Picture Adjustment Screen. See BASIC PROCEDURE OF ADJUSTMENT MENU 
OPERATIONS on page E-33 for the basic operation procedures.
Adjusting the Signal Contrast
Press F to increase the input signal contrast.
Press 
E to reduce the input signal contrast.
Press 
< to store.
Adjusting the Drive Contrast
Press F to raise the display’s luminance level, and increase the contrast.
Press 
E to lower the display’s luminance level, and reduce the contrast.
Press 
< to store.
*If Ambient Sensor is ON, the change made by this adjustment may be difficult to be recognized in too bright or dark a place.
Adjusting the Brightness
Press F to increase the brightness.
Press 
E to reduce the brightness.
Press 
< to store.
Adjusting Color
Press F to darken the color.
Press 
E to lighten the color.
Press 
< to store.
Adjusting the Tint
Press F to change the tint to a more greenish color.
Press 
E to change the tint to a more purplish color.
Press 
< to store.
Adjusting the Sharpness
Press F to sharpen the Sharpness.
Press 
E to soften the Sharpness.
Press 
< to store.
Adjusting the Ambient Sensor
Automatically adjusts the Sharpness to an optimized level that matches the brightness of the surrounding area.
Each time 
E or F is pressed, the setting is switched.
On
 < Off
Press 
< to store.
Setting Picture Mode
Each time you press E or F , the available choices appear in the following sequence.
Press 
< to store. Natural
Enables you to watch pictures with natural color tones and high picture clarity. This mode is suitable for watching movies or TV.
FineBest for watching movies in darkened rooms.
EffectiveBest for watching TV in bright environments.
ConventionalDisplays a screen approximating that of a conventional TV screen.
StillSuitable for watching static images such as computer or still camera images.
MHD01862_E.book  34 ページ  ２００５年１１月２５日　金曜日　午後８時５４分
 
						

							E-35
English
Deutsch
Espa
ñol
Fran
çais
Italiano
Portugu
ês
日 本 語
Póññêèé
中文
Adjusting the Color Temp.
“Color Temperature” can be set.
Each time 
E or F is pressed, the color temperature mode is switched as shown below.
[Warm]: More reddish colors
[Cool]: More bluish colors
Press 
< to store.
Setting Picture Memory
The adjustment status of eight groups of picture adjustment settings can be stored, enabling you to 
quickly switch to your desired group of settings for the picture you are planning to watch.
[Save]: Use 
C or D to select Memory 1 - 8. If < is pressed, the current picture adjustment 
values are stored to the selected Memory.
[Load]: Use 
C or D to select Memory 1 - 8. When < is pressed, the values becomes the picture 
adjustment values stored in the selected Memory.
Picture Memory Selection Screen
“Save” Selection Screen
“Load” Selection Screen
Note
• The screen display disappears if there is no operation within approximately 60 seconds.
• Depending on the model or the optional devices, some of the functions may not be available.
• The adjustment range varies according to the display signals. Make adjustments to your preferred picture quality within the adjustment range.
• Depending on the type of signal, it may not be possible to make some of the settings or adjustments.
MHD01862_E.book  35 ページ  ２００５年１１月２５日　金曜日　午後８時５４分
 
						

							E-36
ADJUSTING SCREEN POSITION AND SIZE 
• You can make changes to all screen adjustment options in the POSITION/SIZE Menu. See Page 
E-33 for the basic operation procedures.
• The changes you make will be stored for the selected input mode.  Therefore, you need to select a 
desired input mode before making any changes.
Adjusting Screen Position (Position)
Horizontal position (Horizontal)
F: Moves screen to the right.
E: Moves screen to the left.
Vertical position (Vertical)
C: Moves screen up.
D: Moves screen down.
Press 
< to store.
Adjusting Screen Size (Size)
Screen width (Width)
F: Increases width.
E: Reduces width.
Screen height (Height)
C: Increases height.
D: Reduces height.
Press 
< to store.
POSITION/SIZE Menu screen
“Position” adjustment screen
“Size” adjustment screen
MHD01862_E.book  36 ページ  ２００５年１１月２５日　金曜日　午後８時５４分
 
						

							E-37
English
Deutsch
Espa
ñol
Fran
çais
Italiano
Portugu
ês
日 本 語
Póññêèé
中文
ADJUSTING AUDIO
• You can make changes to all audio adjustment options in the AUDIO Menu. See Page E-33 for the basic operation procedures.
• The changes you make will be stored for the selected input mode.  Therefore, you need to select a desired input mode before making any 
changes.
Adjusting Treble (Treble)
Press EF to make adjustments.
F: Stronger treble
E: Weaker treble
Press 
< to store.
Adjusting Bass (Bass)
Press EF to make adjustments.
F: Stronger bass
E: Weaker bass
Press 
< to store.
Adjusting Volume Balance (Balance)
Press EF to make adjustments.
F: Shifts the volume balance towards the right.
E: Shifts the volume balance towards the left.
Press 
< to store.
Setting Loudness (Loudness)
Corrects the balance between bass and treble for easy listening even with weak volume.
Each time you press 
E or F, one of the available choices appears in the following sequence:
Press 
< to store.
AUDIO Menu screen
Note
• The screen display disappears if there is no operation within approximately 60 seconds.
• Depending on the model or the optional devices, some of the functions may not be available.
• The adjustment range varies according to the display signals. Make adjustments to your preferred picture quality within the adjustment range.
• Depending on the type of signal, it may not be possible to make some of the settings or adjustments.
MHD01862_E.book  37 ページ  ２００５年１１月２５日　金曜日　午後８時５４分
 
						

							E-38
OTHER ADJUSTMENTS
• FEATURES setup screen has the following 5 options.
See Page E-33 for the basic operation procedures.
[Adjustment]: Can make a fine adjustment of pictures such as Dot Clock, Clamp Position.
[On Screen Menu]: Can make a display setting such as OSD, Language. (See P. E-39.)
[Input Terminal]: Can make an input terminal setting such as Video Input. (See P. E-40.)
[Channel Setting]: Can make channel settings. (See P. E-40.)
[Others]: Used to make Screen Orbiter and other settings. (See P. E-41–E-43.)
Dot Clock, Clock Phase, Clamp Position, and Auto Calibration are adjusted as shown in the following chart.
Select the item with 
CD , and then adjust with E F. Finally, press < to implement the adjustments.
ADJUSTMENT
Adjustment Item Contents of Adjustments Operation
Dot Clock
(mD-sub)You may find the vertically-striped pattern in pictures, 
depending on the clock frequency of your PC’s processor.
If you experience blurring, you can obtain a clearer picture by 
adjusting the “Dot Clock”.Use 
E F to adjust to minimize vertically-
striped pattern in pictures.
Clock Phase
(mD-sub)Pictures and the outline of letters may blur or flicker as the 
clock phase of your PC may be different. In this case, adjust the 
clock phase manually. Normally, the automatic setting ensures 
the optimal value.Use 
E F to adjust to minimize pictures blur.
Clamp Position
(mD-sub,Comp. 
video)Adjusts the extremely dark or bright pictures. Normally, the 
automatic setting ensures the optimal value.Use 
E F to adjust pictures optimally.
Auto Calibration
(mD-sub)Adjusts the dynamic range of images to the optimum. 
Performed while a white screen signal is received.Display the Auto Calibration screen and select 
Execute, and then use 
CD to select the 
item.
MHD01862_E.book  38 ページ  ２００５年１１月２５日　金曜日　午後８時５４分
 
						

							E-39
English
Deutsch
Espa
ñol
Fran
çais
Italiano
Portugu
ês
日 本 語
Póññêèé
中文
• Setting Display Information (OSD)
You can use this option to select from following display indication.
Each time you press 
E or F, one of the available choices appears in the following sequence:
[On (OSD:bright)]: On-screen information shown in light color.
[On (OSD:dark)]: On-screen information shown in dark color.
Press 
< to store.
* If the screen picture is too bright, some characters may be difficult to watch when
 [On (OSD:dark)] is selected.
• Selecting Language (Language)
You can use this option to select the language displayed on the screen.
(1) Select “Language” and press 

						

							E-40
OTHER ADJUSTMENTS (Continued)
• Selecting the settings of Video Input terminal (VIDEO1-4)
Select the video input format.
Each time 
EF is pressed, the setting is switched.
Press 
< to store.
* RGB input is not made to Video 3.
Video Format
You can use this option to select the video format appropriate for the input signal.
Each time you press 
E or F, one of the available modes appears in the following sequence:
[Auto1]: Automatically selects NTSC, PAL and SECAM.
[Auto2]: Automatically selects NTSC and M-PAL.
[Other than Auto]: You need to select a system appropriate to the input signal.
Press 
< to store.
Press 
C or D to select the items for setting. It is switched as shown as below.
Press 
< to proceed to the next step.
Auto Store
Press E or F to select the country or region, and then press