Fujitsu P55xts51 Users Manual

E-41
English
Deutsch
Espa
ñol
Fran
çais
Italiano
Portugu
ês
日 本 語
Póññêèé
中文
•Adjust
Each time 
E or F is pressed, the fine-tune adjustment for Tuning is switched.
•Skip
This function specifies whether or not to use the Skip function for the displayed Program No.
Each time 
E or F is pressed, the setting is switched.
Off < On
[Off]: The Skip function is not available when Channel Up/Down has been selected.
[On]: The Skip function is available when Channel Up/Down has been selected.
Press 
< to store.
*...

E-42
OTHER ADJUSTMENTS (Continued)
• Minimizing phosphor burn-in (Screen Orbiter) for RGB
You can use this option to move the screen position to minimize phosphor-induced “burn-in”.
Follow the steps below.
(1) Select “Screen Orbiter” and press 

E-43
English
Deutsch
Espa
ñol
Fran
çais
Italiano
Portugu
ês
日 本 語
Póññêèé
中文
• Setting Exhibition Mode (Exhibition Mode)
You can use this option to display the enhanced contrast, which is most suitable for the use by unspecified persons.
Each time you press 
E or F, one of the available choices appears in the following sequence:
On < Off 
Press 
< to store.
* In Exhibition mode, the display returns to the original setting in about 5 minutes even if the adjustment is changed.
* The setup will be cancelled...

E-44
INITIALIZATION OF USER ADJUSTMENT VALUE
You can restore the values of the adjustment/setting made in the MENU to factory settings.
1
Press ;.
The main menu screen will appear.
2
Press E or F to select “FACTORY 
DEFAULT”.
Each time you press E or F, one of the available 
menus appears in the following sequence:
PICTURE < POSITION/SIZE < AUDIO < FEATURES < 
FA C TO RY  D E FA U LT
The FACTORY DEFAULT Menu screen will appear.
3
Press 

E-45
English
Deutsch
Espa
ñol
Fran
çais
Italiano
Portugu
ês
日 本 語
Póññêèé
中文
OPTIONS
* When installing an option, make sure that all installation requirements for that option (as given in the relevant instruction manual) are met.
* The colors of options do not match the display colors perfectly.
* To improve the function and performance of optional accessories, specifications and part names may change. Consult your local dealer 
before purchasing.  Wall-mounting Bracket 0° to 15° mounting angle  P-WB4201...

E-46
MAIN SUPPORTED SIGNALS
This display can store the latest four types of signals for RGB adjustment value. The fifth input signal will replace the adjustment value of 
the first input signal. 
To do this, select a desired signal and follow the instructions in “Adjusting Screen Position and Size” on P. E-36 to adjust the parameters. 
When you finish, the settings will be automatically stored.  Thus, when the display receives that signal, pictures will be displayed in 
accordance with the settings you...

E-47
English
Deutsch
Espa
ñol
Fran
çais
Italiano
Portugu
ês
日 本 語
Póññêèé
中文
TABLE OF TV FREQUENCIES
TABLE OF TV FREQUENCIES
[Applicable Countries] [Applicable Countries] [Applicable Countries] [Applicable Countries] [Applicable Countries]
Austria, Belgium, Denmark, 
Finland, Germany, Greece, 
Netherlands, Norway, 
Portugal, Spain, Sweden, 
Switzerland, Luxemburg, 
Israel, Cyprus, OthersPolandItalyFrance Great Britain, Ireland
Frequency (MHz) Frequency (MHz) Frequency (MHz) Frequency (MHz) Frequency...

E-48
SPECIFICATION
WIDE PLASMA DISPLAY
Regulation 
• CE Safety: EN60065 
EMC: EN55013 (CISPR13) 
EN55020 (CISPR20)
EN55022 (CISPR22)
EN55024 (CISPR24)
EN61000-3-2 1995
EN61000-3-3 1995 Model P42HTS51E P50XTS51E P55XTS51E
Screen size  42” wide screen:
92.2 cm (W) x 52.2 cm (H)
(106.0 cm diagonal)
36.3 inch (W) x 20.6 inch (H)
(41.7 inch diagonal)50” wide screen:
110.6 cm (W) x 62.2cm (H) (126 
9cm diagonal)
43.5 inch (W) x 24.5inch (H) (50 
inch diagonal)55” wide screen:
122.9 cm (W) x 69.1cm (H) (140 
cm...

E-49
English
Deutsch
Espa
ñol
Fran
çais
Italiano
Portugu
ês
日 本 語
Póññêèé
中文
AV SELECTOR
Regulation 
• CE Safety: EN60065 
EMC: EN55013 (CISPR13) 
EN55020 (CISPR20)
EN55022 (CISPR22)
EN55024 (CISPR24)
EN61000-3-2 1995
EN61000-3-3 1995 Model P-TU4251E P-TU5051E  P-TU5551E
Weight  5 kg / 11.0 lbs
Outer dimensions 43.0 (W) x 9.5 (H) x 35.0 (D) cm / 16.9 (W) x 3.7 (H) x 13.8 (D) inch
Power supply  110-240 VAC 50/60 Hz 
External equipment terminals 
Antenna input TV 75Ω
Video 1, 2, 4  input terminal Video,...

E-50
CLEANING AND MAINTENANCE
Precautions
Be sure to remove the power plug from the receptacle before cleaning the display.
Be sure not to clean the display using a cloth dampened with volatile solvents, such as benzene or thinner.  Such solvents can harm the 
display’s cabinet, the filter at the screen front, and the remote control.  They can also cause paint to come off these sections.
Cleaning the Screen
Clean the screen gently with a soft cloth.
The screen surface is fragile.  Never attempt to clean...