Fujitsu P55xha40 Users Manual

E-27
English
Deutsch
Espa
ñol
Fran
çais
Italiano
Portugu
ês
日 本 語
Póññêèé
中文
ADJUSTING SCREEN POSITION AND SIZE 
• You can make changes to all screen adjustment options in the POSITION/SIZE Menu. See Page 
E-20 for the basic operation procedures.
• The changes you make will be stored for the selected input mode.  Therefore, you need to select a 
desired input mode before making any changes.
Adjusting Screen Position (Position)
Horizontal position (Horizontal)
F: Moves screen to the right.
E: Moves screen...

E-28
ADJUSTING AUDIO
• You can make changes to all audio adjustment options in the AUDIO Menu. See Page E-20 for the basic operation procedures.
• The changes you make will be stored for the selected input mode.  Therefore, you need to select a desired input mode before making any 
changes.
Adjusting Treble (Treble)
Press EF to make adjustments.
F: Stronger treble
E: Weaker treble
Press 
< to store.
Adjusting Bass (Bass)
Press EF to make adjustments.
F: Stronger bass
E: Weaker bass
Press 
< to store....

E-29
English
Deutsch
Espa
ñol
Fran
çais
Italiano
Portugu
ês
日 本 語
Póññêèé
中文
OTHER ADJUSTMENTS
• FEATURES setup screen has the following 4 options.
See Page E-20 for the basic operation procedures.
[Adjustment]: Can make a fine adjustment of pictures such as Dot Clock, Clamp Position.
[On Screen Menu]: Can make a display setting such as OSD, Language. (See P. E-30.)
[Input Terminal]: Can make an input terminal setting such as Video Input. (See P. E-31.)
[Others]: Used to make Screen Orbiter and other...

E-30
OTHER ADJUSTMENTS (Continued)
• Setting Display Information (OSD)
You can use this option to select whether to display information other than menus.  (Error messages are 
displayed regardless of what choice you make for this option.)
Each time you press 
E or F, one of the available choices appears in the following sequence:
[On (OSD:bright)]: On-screen information shown in light color.
[On (OSD:dark)]: On-screen information shown in dark color.
[Off]: Except for menus and error messages, on-screen...

E-31
English
Deutsch
Espa
ñol
Fran
çais
Italiano
Portugu
ês
日 本 語
Póññêèé
中文
• Selecting the settings of Video/S-video Input terminal 
You can use this option to select the color format appropriate for the input signal.
Each time you press 
E or F, one of the available modes appears in the following sequence:
[Auto1]: Automatically selects NTSC, PAL and SECAM.
[Auto2]: Automatically selects NTSC and M-PAL.
[Other than Auto]: You need to select a system appropriate to the input signal.
Press 
< to store....

E-32
OTHER ADJUSTMENTS (Continued)
Auto Off-NO SIG.
You can make to the standby state automatically when the no signal state continued during set up time.
Press 
C D to select the Time.
Press 
E F to select the amount of time before the standby state starts.
Press 
< to store.
* The numerical value is the approximate amount of time before the standby state starts. 
You can assign the black or white color for the background color at the no signal state.
Press 
C Dto select the Background.
Press 
E F to...

E-33
English
Deutsch
Espa
ñol
Fran
çais
Italiano
Portugu
ês
日 本 語
Póññêèé
中文
• Minimizing phosphor burn-in (Screen Orbiter) for RGB
You can use this option to move the screen position to minimize phosphor-induced “burn-in”.
Follow the steps below.
(1) Select “Screen Orbiter” and press 

E-34
OTHER ADJUSTMENTS (Continued)
• Setting Exhibition Mode (Exhibition Mode)
You can use this option to display the enhanced contrast, which is most suitable for the use by unspecified persons.
Each time you press 
E or F, one of the available choices appears in the following sequence:
On < Off 
Press 
< to store.
* In Exhibition mode, the display returns to the original setting in about 5 minutes even if the adjustment is changed.
* The setup will be cancelled when removing the power plug from the...

E-35
English
Deutsch
Espa
ñol
Fran
çais
Italiano
Portugu
ês
日 本 語
Póññêèé
中文
INITIALIZATION OF USER ADJUSTMENT VALUE
You can restore the values of the adjustment/setting made in the MENU to factory settings.
1
Press ;.
The main menu screen will appear.
2
Press E or F to select “FACTORY 
DEFAULT”.
Each time you press E or F, one of the available 
menus appears in the following sequence:
PICTURE < POSITION/SIZE < AUDIO < FEATURES < 
FA C TO RY  D E FA U LT
The FACTORY DEFAULT Menu screen will appear.
3
Press 

E-36
CLEANING AND MAINTENANCE
Precautions
Be sure to remove the power plug from the receptacle before cleaning the display.
Be sure not to clean the display using a cloth dampened with volatile solvents, such as benzene or thinner.  Such solvents can harm the 
display’s cabinet, the filter at the screen front, and the remote control.  They can also cause paint to come off these sections.
Cleaning the Screen
Clean the screen gently with a soft cloth.
The screen surface is fragile.  Never attempt to clean...