Fujitsu P42xha58 Users Manual

E-11
English
Deutsch
Espa
ñol
Fran
çais
Italiano
Portugu
ês
日 本 語
Póññêèé
中文
RGB INPUT MODE
1
Press ) to select the input mode.
You can select RGB1.
• RGB1: mD-sub
* For selection of the input terminal, see  “SETTING THE INPUT TERMINALS” on 
P. E-24.
CONVENIENT FUNCTIONS
On-screen information
Press 3.
The mode is indicated on the screen for 5 seconds.
Picture Mode
Press 4.
This button can be used to  switch the picture mode.
In the picture mode, you can switch betwee n the set status and the fine mode....

E-12
WATCHING PICTURES ON THE WIDE SCREEN
SWITCHING BETWEEN SCREEN SIZES
1
Press .
The currently selected mode will appear.
2
Press  to select a desired Screen 
Size.
Each time you press , a different Screen Size 
appears.  The sequences  used are as follows:
When you are in a Video input mode
When you are in an RGB input mode
* Depending on the type of signal, some aspects  may not be selected.
* You can also use the buttons on the display’s control 
panel to perform these steps.
Normal mode
Wide1...

E-13
English
Deutsch
Espa
ñol
Fran
çais
Italiano
Portugu
ês
日 本 語
Póññêèé
中文
Normal (Video/RGB)
Displays pictures of normal size (i.e., a 4:3 aspect ratio).
Wide1 (Video)
Displays natural-looking pictures of standard size on the wide screen.
Wide2 (Video)/Wide (RGB)
Ideal for displaying vertical ly extended pictures such as squeezed pictures.
Zoom1 (Video)/Zoom (RGB)
Enlarges horizontally extended pictures equall y in all directions to maintain the aspect 
ratio constant.
Zoom2 (Video)
Reduces the...

E-14
ADJUSTMENT MENU
The numbers in parentheses (   ) indicate the reference page numbers.
MENU
PICTURE (E-15) Signal Contrast (E-16)
POSITION/SIZE (E-21) Drive Contrast (E-16) Black Level (E-18)
AUDIO (E-22) Brightness (E-16) Detail Gradation (E-18)
FEATURES (E-23) Color (E-16) 3D NR (E-18)
FACTORY DEFAULT (E-27)Tint (E-16) CODEC NR (E-18)
Sharpness (E-16) Image Enhance (E-18) Chroma Transient (E-18)
Ambient Sensor (E-16) Color Temp. (E-19) Image Identify (E-18)
Picture Mode (E-17) User Color Temp...

E-15
English
Deutsch
Espa
ñol
Fran
çais
Italiano
Portugu
ês
日 本 語
Póññêèé
中文
BASIC PROCEDURES OF ADJUSTMENT MENU
• Shown below is the basic procedure used to change the options on the ADJUSTMENT MENU. (Ex.: Adjusting tint setting (Tint))
Selecting the adjustment mode for adjustment  or setting. (The items to be adjusted or set are stored for each adjustment mode.)
1
Press ;.
The main menu screen will appear.
2
Press E or F to select “PICTURE”.
Each time you press E or F, one of the available 
menus...

E-16
ADJUSTING THE PICTURE
• Picture-related items can be set and adjusted in the Picture Adjustment Screen. See BASIC PROCEDURES OF ADJUSTMENT MENU on page E-15 for the basic procedures.
Adjusting the Signal Contrast
Press F to increase the input signal contrast.
Press 
E to reduce the input signal contrast.
Press 
< to store.
Adjusting the Drive Contrast
Press F to raise the display’s luminance level, and increase the contrast.
Press 
E to lower the display’s luminanc e level, and reduce the...

E-17
English
Deutsch
Espa
ñol
Fran
çais
Italiano
Portugu
ês
日 本 語
Póññêèé
中文
Setting the Picture Mode
Each time you press E or F , the available choices appear in the following sequence.
<
 Natural < Fine  < Effective  < Conventional  < Still < 
Press < to store.
Precision Setting
Enables advanced pictur e quality adjustments.
See page E-18 for details.
Setting the Picture Memory
Eight groups of picture adjustment settings can  be stored, enabling you to quickly switch to your 
desired group of settings...

E-18
ADJUSTING THE PICTURE (Continued)
Even more advanced picture quality adjustments can be made as required.
Adjusting the Black Level
Press F to strengthen the reproduction of black. (Pr ovides a picture quality with deep blacks.)
Press 
E to weaken the reproduction of black.
Press 
< to store.
Setting the Detail Gradation
Corrects the gradation of the light and dark areas of the picture.
Each time 
E or F is pressed, the setting is switched.
<
 On < Off <
Press 
< to store.
Setting the 3D NR
This...

E-19
English
Deutsch
Espa
ñol
Fran
çais
Italiano
Portugu
ês
日 本 語
Póññêèé
中文
Adjusting the Color Temp.
Use E or F to specify a desired color temperature. Each time you press E or F, one of the available choices appears in the following 
sequence:
<
 -3500K  < ... < Std. < ... < +3500K < User <
[-3500K] : More reddish colors
[+3500K] : More bluish colors
[User] :  User Color Temp. setup
Press 
< to store.
Setting the User Color Temp.
Use C or D to select Red, Green,  or Blue, and adjust the color temp....

E-20
ADJUSTING THE PICTURE (Continued)
• [Targeting White]Corrects red, green, and bl ue with respect to white.
[Red] : Use 
E and F to adjust Red.
[Green] : Use 
E and F to adjust Green.
[Blue] : Use 
E and F to adjust Blue.
Press 
< to store.
Making the Progressive Scan Settings
This sets the conversion processing of in terlace signals to block receive signals.
• 24 Frame Mode This function enables the optimized display of  movies, etc. with 24 frames/second signals.
Each time 
E or F is pressed, the...