Fujitsu P42hta51 Users Manual
Here you can view all the pages of manual Fujitsu P42hta51 Users Manual. The Fujitsu manuals for Television are available online for free. You can easily download all the documents as PDF.
Page 11
E-11 English Deutsch Espa ñol Fran çais Italiano Portugu ês 日 本 語 Póññêèé 中文 CONNECTING THE DISPLAY TO EXTERNAL EQUIPMENT • Connects to the antenna input terminal on the display bottom. • Connect the video signal cable to the component video input terminal, HDMI input terminal, S-video input terminal, or the video input terminal. • If the component to be connected is equipped with HDMI output terminal or the component video output terminal, connection to e ither of these terminals is recommended. (If...
Page 12
E-12 BASIC OPERATIONS TURNING THE POWER ON AND STAND-BY 1 Press OFF/ON to the left at the bottom of the display to the STD- BY state. The power lamp lights up. 2 Press on the remote control. The color of the power lamp changes from “Red” to “Green”. 3 Press , the button of the channel you want to watch, and then press or . Select TV or the picture mode to input. 4 Press when the power is ON. The color of the power lamp changes from “Green ” to “Red” and the display goes into standby state....
Page 13
E-13 English Deutsch Espa ñol Fran çais Italiano Portugu ês 日 本 語 Póññêèé 中文 WATCHING A TV BROADCASTING 1 Select the country. Select the country using the Auto Store function in the CHANNEL SETTING menu (see page E-26). This enable the terrestrial broadcastings to be watched for selected country. 2 Press . Available to watch the terrestrial broadcastings. The last Program No. that you watched is received. 3 Select the Program No. Press – . The program changes to the selected Program No. Select...
Page 14
E-14 BASIC OPERATIONS (Continued) WATCHING A TELETEXT BROADCASTINGS 1 Display the TV program. Press to set to TV mode. 2 Press .. This enables teletext broadcasts to be viewed. (superimposed over the TV program) The teletext broadcasting INDEX screen is received. * Whenever . is pressed, the screen switches betwee n teletext screen superimposed over the TV program and teletext-only screen. • Displays the teletext page program. The teletext page program is displayed when 3 digit number by – and...
Page 15
E-15 English Deutsch Espa ñol Fran çais Italiano Portugu ês 日 本 語 Póññêèé 中文 RGB INPUT MODE 1 Press to select the input mode. The input terminal of RGB mode is as follows. • RGB1: mD-sub * For selection of the input terminal, see “SETTING THE INPUT TERMINALS” on P. E-25. CONVENIENT FUNCTIONS DISPLAY Displaying on-screen information. Press 3. The channel or mode is indicate d on the screen for 5 seconds. PICTURE MODE Press 4. This button can be used to switch the picture mode. In the picture mode,...
Page 16
E-16 WATCHING PICTURES ON THE WIDE SCREEN SWITCHING BETWEEN SCREEN SIZES 1 Press . The currently selected mode will appear. 2 Press to select a desired Screen Size. Each time you press , a different Screen Size appears. The sequences used are as follows: When you are in a Video input mode When you are in an RGB input mode * Depending on the type of signal, some aspects may not be selected. * You can also use the buttons on the display’s control panel to perform these steps. Normal mode Wide1...
Page 17
E-17 English Deutsch Espa ñol Fran çais Italiano Portugu ês 日 本 語 Póññêèé 中文 Normal (Video/RGB) Displays pictures of normal size (i.e., a 4:3 aspect ratio). Wide1 (Video) Displays natural-looking pictures of standard size on the wide screen. Wide2 (Video)/Wide (RGB) Ideal for displaying vertical ly extended pictures such as squeezed pictures. Zoom1 (Video)/Zoom (RGB) Enlarges horizontally extended pictures equall y in all directions to maintain the aspect ratio constant. Zoom2 (Video) Reduces the...
Page 18
E-18 ADJUSTMENT MENU The numbers in parentheses ( ) indicate the reference page numbers. MENU PICTURE (E-19) Signal Contrast (E-20) Drive Contrast (E-20) Brightness (E-20) Color (E-20) Tint (E-20) Sharpness (E-20) Ambient Sensor (E-20) Picture Mode (E-20) Color Temp. (E-21) Picture Memory (E-21) Default POSITION/SIZE (E-22) Position (E-22) Size (E-22) Default AUDIO (E-23) Treble (E-23) Bass (E-23) Balance (E-23) Loudness (E-23) FEATURES (E-24)) Adjustment (E-24) Dot Clock (E-24) Clock Phase (E-24)...
Page 19
E-19 English Deutsch Espa ñol Fran çais Italiano Portugu ês 日 本 語 Póññêèé 中文 BASIC PROCEDURE OF ADJUSTMENT MENU OPERATIONS • Below is shown the basic procedure to make changes to the options in the ADJUSTMENT MENU. (Ex.: adjusting tint setting (Tint)) 1 Press ;. The main menu screen will appear. 2 Press E or F to select “PICTURE”. Each time you press E or F, one of the available menus appears in the following sequence: PICTURE < POSITION/SIZE < AUDIO < FEATURES < FACTORY DEFAULT The PICTURE...
Page 20
E-20 ADJUSTING THE PICTURE • Picture-related items can be set and adjusted in the Picture Adjustment Screen. See BASIC PROCEDURE OF ADJUSTMENT MENU OPERATIONS on page E-19 for the basic operation procedures. Signal Contrast Press F to increase the input signal contrast. Press E to reduce the input signal contrast. Press < to store. Drive Contrast Press F to raise the display’s luminance level, and increase the contrast. Press E to lower the display’s luminanc e level, and reduce the contrast. Press...