Fujitsu Myrica SE32 User Manual

							  LCD TV MYRICA SE 32 
A26361-K1085-Z120-1-M119, edition 1  English - 29 
Technical data 
Screen: 
Visible area / screen size:  708.95 mm (H) x 398.59 mm (V) diagonal 32.02  
Picture format:  Wide screen 16:9 
Pixel spacing:  0.1730 (H) x RGB x 0.5190 (V) mm² 
No. of pixels:  1366 (H) x 768 (V) 
Brightness type:  550 cd/m² 
Contrast type:  1000 : 1 
Response time:  8 ms (mean value) 
Viewing angle type:  170 Grad  (horizontal / vertical) 
Lighting life:  Minimum 50.000 hours 
Panel technology:  SMVA 
 
TV and video input / output: 
Analogue tuner input:  75 ohm F-type for antenna/CATV 
AV input:  Composite (RCA) + Audio-L/R (RCA) 
S-Video input:  4-pole DIM + Audio-L/R (RCA) 
Component input:  YPbPr (RCA) + Audio-L/R (RCA) 
2 x SCART:  CVBS / RGB (input) und TV/CVBS (output) 
 
PC input/output: 
VGA input:  RGB (D-SUB 15-pole)  + PC-Audio (3.5 mm socket) 
DVI-D / HDCP input:  DVI-D / HDCP input + PC-Audio (3.5 mm socket) 
RS232 input:  9-pin D-SUB (only for firmware updates) 
Subwoofer output:  Subwoofer output (RCA) 
Headphone output:  3.5 mm socket 
 
 
						

							LCD TV MYRICA SE 32 
30 - English A26361-K1085-Z120-1-M119, edition 1 
 
Compatibility: 
TV system:  PAL & SECAM 
Video system:  PAL & SECAM 
PC:  640 x 350 @ 70 Hz 640 x 480 VGA @ 60 Hz, 72 Hz, 75 Hz 
800 x 600 SVGA @ 56 Hz, 60 Hz, 72 Hz 
1024 x 768 XGA @ 60 Hz, 70 Hz 
1280 x 720 @ 60 Hz 
1280 x 768 @ 60 Hz 
1280 x 1024 @ 60 Hz 
1360 x 768 @ 60 Hz 
SDTV / HDTV format:  1080i, 576p, 576i (PAL) 
 
Standards: 
Security:  UL/CUL, CB, TÜV, PSE, CCC 
EMC:  FCC Class B, CE, S symbol, BSMI 
 
Power: 
Input voltage:  AC 100-240V , 2.4 A  50/60 Hz 
Power consumption:  <   210 W 
Standby:  <   5 W 
 
Environment: 
Operating:  0 - 40 degrees C 10% - 90% (non-condensing) 
Storage:  -20 - 60 degrees C10% - 90% (non-condensing) 
 
Audio: 
Integrated loudspeakers:  2 x 8 W (8 Ohm) 
 
Dimensions: 
Width/height//depth:  792 mm x 580 mm x 240 mm (height with base) 
Weight: 19.3 kg 
 
 
						

							  LCD TV MYRICA SE 32 
A26361-K1085-Z120-1-M119, edition 1  English - 31 
VESA-DDC-compatible VGA interface 
Your LCD TV is equipped with a VESA-DDC-compatible VGA interface and a DVI-D interface. 
VESA-DDC (Video Electronics Standard Association, Display Data Channel) is used as the 
communications interface between the LCD TV and t he computer. If your computer is equipped with 
a VESA-DDC-compatible VGA interface, it can aut omatically read the data for ensuring optimum 
operation from your LCD TV and select the appropriate settings. 
Preset operating modes 
i  The picture position and size have been set to 
optimum values at the factory for the 
operating modes listed above. Depending on  the screen controller used, it may be 
necessary to adjust the display position and  size. In this case, you can change and save 
the settings (see the Operation chapter).  
 The following are the most frequently used of the preset operating modes: 
Resolution Refresh rate 
640 x 350 
640 x 480 
800 x 600 
1024 x 768 
1280 x 720 
1280 x 768 
1360 x 768  70 Hz 
60 Hz, 72 Hz, 75 Hz 
56 Hz, 60 Hz, 72 Hz  60 Hz, 70 Hz 60 Hz 
60 Hz 
60 Hz 
 In the PC mode, a screen resolution of 1360 x  768 is recommended. Because of the technology 
used (active matrix) an LCD TV provides a totally  flicker-free picture even with a refresh rate of 
60 Hz. 
Power consumption 
To save energy when the device is temporarily not  in use, the LCD TV can be switched into the 
standby mode with the remote control (POWER button) or the STANDBY button. 
  Switched on  Standby mode 
Power indicator  lights green  lights red 
Function  LCD TV is working normally  LCD TV is dark 
Power consumption  normal < 210 W  reduced to < 5 W 
 
i If the LCD TV is switched into the Standby mode mode, a power consumption of up to 5 W 
is maintained to enable operation with the remote control.  
To completely switch off the power consumption, switch off the device with the ON/OFF 
switch (see Switching LCD TV on/off). 
 
 
						

							LCD TV MYRICA SE 32 
32 - English A26361-K1085-Z120-1-M119, edition 1 
PC Analogue (D-SUB) 
1
5
6
10
11
15
 
Pin Meaning  Pin Meaning 
1  Video input red    9  +5 V (DDC) 
2  Video input green    10  Sync. earth 
3  Video input blue    11  Earth 
4 Earth  12 DDC-Data 
5 Earth  13 H. sync 
6  Red video earth    14  V. sync 
7  Green video earth    15  DDC Clock 
8  Blue video earth        
PC Digital (DVI-D) 
1 9
17
 
Pin Meaning    Pin Meaning    Pin Meaning 
1  TMDS Data2-    9  TMDS Data1-    17  TMDS Data0- 
2  TMDS Data2+    10  TMDS Data1+    18  TMDS Data0+ 
3  TMDS Data 2/4  Shield    11  TMDS Data 1/3 
Shield    19  TMDS Data 0/5 Shield 
4  not connected    12  not connected    20  not connected 
5  not connected    13  not connected    21  not connected 
6  DDC Clock    14  +5V Power    22  TMDS Clock Shield 
7  DDC Data    15  Earth    23  TMDS Clock- 
8 Analogue Vertical 
Sync    16  Hot Plug Detect    24  TMDS Clock+ 
 
 
						

							  LCD TV MYRICA SE 32 
A26361-K1085-Z120-1-M119, edition 1  English - 33 
SCART (Half/Full) 
  
Pin Meaning    Pin Meaning   Pin Meaning 
1  Sound (R) output    8  Changeover voltage    15  Red *) 
2  Sound (R) input    9  Green earth *)    16  Blanking *) 
3  Sound (L) output    10  Not assigned    17  Video output earth 
4  Sound signal earth    11  Green *)    18  Video input earth 
5  Blue earth *)    12  Not assigned    19  Video output 
6  Sound (L) input    13  Red earth *)    20  Video input 
7  Blue *)    12  Blanking earth    21  Shield earth   *) Not used with SCART (Half) 
S-Video 
Pin  Meaning  
1 GND 
2 GND 
3 Luminance (Y) 
 
4 Chrominance (C) 
 
 
						

							LCD TV MYRICA SE 32 
34 - English A26361-K1085-Z120-1-M119, edition 1 
Colour and transmission system by country 
Country TV Colour Stereo Subtitles 
Albania B/G PAL   
Austria B/G PAL FM-FM Teletext 
Azores B PAL   
Bahrain B PAL   
Belgium B/G PAL Nicam Teletext 
Bulgaria D SECAM   
Canary Islands  B  PAL     
Croatia B/H PAL   
Cyprus B PAL   
Czech Republic  D/K  SECAM / PAL     
Denmark B PAL Nicam Teletext 
Egypt B SECAM   
Faroe Islands (DK)  B  PAL     
Finland B/G PAL Nicam Teletext 
France E/L SECAM  Teletext 
Germany B/G PAL FM-FM Teletext 
Gibraltar B PAL   
Greece B/G PAL   
Hungary  B/G & D/K  PAL  Nicam (Budapest only)   
Iceland B PAL   
Iran H SECAM   
Ireland I PAL Nicam Teletext 
Israel B/G PAL Nicam Teletext 
Italy B/G PAL FM-FM Teletext 
Jordan B PAL   
Kenia B PAL   
Luxemburg B/G PAL Nicam Teletext 
Madeira B PAL   
Malta B/G PAL   
Marocco B SECAM   
Monaco  L/G  SECAM / PAL     
 
						

							  LCD TV MYRICA SE 32 
A26361-K1085-Z120-1-M119, edition 1  English - 35 
 Country TV Colour Stereo Subtitles 
Netherlands B/G PAL FM-FM Teletext 
Norway B/G PAL Nicam  
Poland D/K PAL  Teletext 
Portugal B/G PAL  Teletext 
Rumania G PAL   
Russia D/K SECAM   
Saudi Arabia  B  SECAM     
Slovakia  D/K  SECAM / PAL     
Slovenia B/H PAL   
South Africa  I  PAL     
Spain B/G PAL Nicam Teletext 
Sweden B/G PAL Nicam Teletext 
Switzerland B/G PAL FM-FM Teletext 
Tunesia B SECAM   
Turkey B PAL  Teletext 
United Arab Emirates  B/G  PAL     
United Kingdom  I  PAL  Nicam  Teletext 
 
 
						

							LCD TV MYRICA SE 32 
36 - English A26361-K1085-Z120-1-M119, edition 1 
Troubleshooting 
Should an error occur, first check the following points. If the distortion is still not eliminated, the LCD 
TV should, if possible, be checked on another si gnal source and/or with another data cable.  
If you are unable to solve the problem, please inform our help desk. 
Having this problem?  Check the following points: 
No display (power indicator does not light)  ►  Check whether the power cable on the 
device is connected correctly. 
Display becomes darker  The background lighting has a limited lifetime. If  your screen display should become too dark, the 
background lighting will have to be exchanged. 
►  Please contact our help desk. 
Permanently unlit or lit pixels  The  standard of production techniques today 
cannot guarantee an absolutely fault-free screen 
display. A few isolated constant lit or unlit pixels 
may be present. The maximum permitted number 
of pixels faults is st ipulated in the stringent 
international standard ISO 13406-2 (Class II). 
No picture (power indicator glows orange)  ►  Check the setting of the picture signal 
source. 
►   Alter the brightness and/or contrast until 
you get a picture. 
The remote control does not work.  ►  Check whether the batteries in the remote 
control are still sufficiently charged. 
►   Make sure that the sensor for the remote 
control on the LCD TV is not exposed to 
strong light. 
Troubleshooting in TV mode 
Having this problem?  Check the following points: 
No sound  ►  Check the volume setting. 
►   Check whether the device is muted. 
No picture, only static  ►  Check that the antenna cable is correctly 
connected. 
Reception may be poor. 
Picture is fuzzy  ►  Check that the antenna cable is correctly 
connected. 
Reception may be poor. 
 
						

							  LCD TV MYRICA SE 32 
A26361-K1085-Z120-1-M119, edition 1  English - 37 
 
Having this problem?  Check the following points: 
The picture has dark interference lines and a 
strong humming sound can be heard. There may be an interference signal on the 
antenna cable. 
►
  Have the installation checked. 
A sheath current filter from the accessories trade 
can provide a remedy. 
The picture has shadows or ghost images  Check antenna cable 
Use a directional antenna instead of an 
omnidirectional antenna. 
Picture shows interference, false colours or line 
and picture shaking  Check whether the LCD TV is set to the correct 
TV standard (PAL or SECAM). 
Troubleshooting in PC mode 
Having this problem?  Check the following points: 
Picture only black or blue 
►  Check the setting of the picture signal 
source. 
►   Check whether the data cable is correctly 
connected. 
Message 
OUT OF RANGE 
or 
Picture only black or blue  The input signal (horizontal frequency and 
refresh rate) at the displayed input does not 
correspond to the technical LCD TV data. 
►
  Adjust the video frequency range using the 
computer software (see documentation for 
your computer or your graphics card). 
Vertical parts of letters are shown distorted or cut 
off  The resolution cannot be shown optimally. 
Change over the computer to a resolution 
recommended for this TV (see Preset operating 
modes). 
Picture position is not correct  The 
LCD TV recognises an undefined mode (see 
Technical data). 
►   Use the OSD function  GEOMETRY/AUTO to 
carry out the self-adjustment of the LCD TV 
(see GEOMETRY menu - picture position 
and sharpness). 
►   Set the picture position with the OSD menu 
(see Operation). 
Picture is shaking  ►  Check whether the data cable for the LCD 
TV is correctly attached to the monitor port 
on the computer. 
►   Use the OSD function  GEOMETRY/AUTO to 
carry out the self-adjustment of the LCD TV 
(see GEOMETRY menu - picture position 
and sharpness).