Fujitsu Myrica SE32 User Manual

  LCD TV MYRICA SE 32 
A26361-K1085-Z120-1-M119, edition 1  English - 9 
 SCART 1  Connection for AV, RGB and audio input signals 
e.g. for satellite receiver, DVD player, video recorder, 
camcorder, decoders or a gaming console 
Out (TV-signal): 
e.g. video recorder, dvd recorder 
 SCART 2  Connection for AV, RGB and audio input signals 
e.g. for satellite receiver, DVD player, video recorder, or a 
gaming console 
Out (picture signal) 
 AV: 
AUDIO 
red (right) 
white (left) 
 VIDEO 
yellow 
Connections...

LCD TV MYRICA SE 32 
10 - English A26361-K1085-Z120-1-M119, edition 1 
Connecting LCD TV 
 Connecting antenna 
►
  Connect an antenna cable to the device and the 
TV antenna socket.  
 Connecting the power supply 
►
  Plug the power cable supplied into the power 
connector of the LCD TV. 
You will find the power connector on the underside of 
the LCD TV. 
►   Connect the connector of the power cable 
supplied into a properly earthed mains outlet and 
ensure a secure connection. 
Switching LCD TV on/off...

  LCD TV MYRICA SE 32 
A26361-K1085-Z120-1-M119, edition 1  English - 11 
Setting language of the OSD menu 
After switching on the device, set the language of the OSD (On Screen Display) menu according to 
your needs. 
►   Switch the LCD TV on with the ON/OFF switch. 
►   Press the POWER button. 
►   Press the MENU button to open the OSD menu. 
►  Choose the  SYSTEM menu item using the 
 button. 
►  Press the 
 button to activate the menu item. 
The menu item  LANGUAGE is preset. 
►  Press the 
 button...

LCD TV MYRICA SE 32 
12 - English A26361-K1085-Z120-1-M119, edition 1 
 
  
i The programmes will be entered in the programme 
list in the order in which they are found. 
However, you can change the order of the programmes later (see Arranging 
programmes). 
Adjusting programme settings 
After the programme search, you can change various pr ogramme settings later, e.g. the order of the 
programmes in the programme list, the progra mme names or the frequency of a channel. The 
following sections contain a...

  LCD TV MYRICA SE 32 
A26361-K1085-Z120-1-M119, edition 1  English - 13 
 The programme list will be displayed with the first 9 
programmes found. If a programme name was detected 
during the programme search, it will be displayed. 
►
  Select the programme you want to move with the 
buttons 
 /  and mark it by pressing the  button. 
The marked programme is displayed in green. 
  ►
  Select the position at which you want to insert the 
programme with the buttons 
 / . Press the 
 button  
The selected...

LCD TV MYRICA SE 32 
14 - English A26361-K1085-Z120-1-M119, edition 1 
Changing programme name 
Five characters are available for the programme name. 
►   Mark the position for the character you want to change under  ID with the buttons 
 / . 
►   Select the desired character at  this position with the buttons 
 / . 
►   Repeat this procedure until you have entered the desired programme name. 
Hiding programme in programme list 
If you want to hide a programme in the programme list ( SKIP=switched on),...

  LCD TV MYRICA SE 32 
A26361-K1085-Z120-1-M119, edition 1  English - 15 
Add Programs 
i Different programmes are available on some channel
s at different times. As a result, it is 
possible that, depending on the time of a progr amme search, different programmes will be 
found. 
 With this function you search  for additional programmes when a programme search has already 
been carried out. The sorting of the programme list is retained and new programmes found are 
added at the end of the programme...

LCD TV MYRICA SE 32 
16 - English A26361-K1085-Z120-1-M119, edition 1 
Operation 
Controls are provided on the device and the  remote control for operating the LCD TV. 
Operating elements on the device 
The operating controls of the LCD TV are located  in the underside of the device. With these buttons 
you can operate the basic functions  of the LCD TV and the OSD menu. 
13245  1 =   STANDBY button 
for changing over from the Normal mode to 
the Standby mode and vice versa 
2 =   SOURCE button  for...

  LCD TV MYRICA SE 32 
A26361-K1085-Z120-1-M119, edition 1  English - 17 
Changing the device settings with the buttons of the control 
panel 
Use the buttons of the control panel to make the following device settings directly while the OSD 
menu is switched off. 
Selecting picture signal source 
►   Press the SOURCE button. The current signal input is displayed. 
►   Press the SOURCE button repeatedly  until the desired signal input appears. 
Selecting TV programme 
►  Press the  ST buttons to change...

LCD TV MYRICA SE 32 
18 - English A26361-K1085-Z120-1-M119, edition 1 
Remote control 
 1  = POWER - switches the device on or into 
the standby mode. 
 2  = MUTE - switches the sound on and off. 
 3  = FREEZE - freezes the video picture. 
If you press the button again, the picture 
returns to the normal mode. 
 4  = SLEEP - Sleep timer 
By pressing several times you can set the 
Sleep timer to 0, 30, 60, 90 or 120 minutes. 
PIP (Picture in Picture)  
 5 = PIPSOURCE - Activates the PIP mode 
Press this...