Fujitsu L20t 1 Eco Getting Started Manual

Edition 2 English - 1 
Introduction
This manual contains important information for correct set-up of your LCD monitor.  
A screen controller with VGA interface is required to control the LCD monitor. The monitor pro\
cesses 
the data supplied to it by the screen controller. The screen controller/the associated driver soft\
ware is 
responsible for setting the modes (resolution and refresh rate). 
When putting the monitor into operation for the first time, the screen display should be optimally 
adapted...

LCD monitor 
2 - English Edition 2 
Important notes 
!
In this chapter you will find information regarding safety which is essential to take note of 
with your monitor. 
Safety notes 
This device complies with the relevant safety regulations for data processing equipment, including 
electronic office machines for use in an office environment. If you have any questions, contact your 
sales outlet or our help desk. 

”  The display surface of the LCD monitor is sensitive to pressure and scratches. You...

LCD monitor 
Edition 2 English - 3 

”  The monitor must be disposed of in accordance with the local regulations for disposal of 
special waste. The screen background lighting contains mercury. You must observe the 
applicable handling and disposal safety regulations for fluorescent tubes. 

”   Only qualified technicians should repair the device. Unauthorised opening and incorrect repair 
may greatly endanger the user (electric shock, fire risk). 

”   Use a screen saver with moving images and activate...

LCD monitor 
4 - English Edition 2 
Cleaning

”  Always pull out the power plug before you clean the monitor. 

”   Do not clean any interior parts yourself, leave this job to a service technician. 

”   Do not use any cleaning agents that contain abrasives or may corrode plastic. 

”   Ensure that no liquid will run into the system. 

”   Ensure that the ventilation areas of the monitor are free. 

”   The display surface of the LCD monitor is sensitive to pressure and scratches. Clean it only 
using a...

LCD monitor 
Edition 2 English - 5 
Checking the contents of the consignment 
!
The display surface of the LCD monitor is sensitive to pressure and scratches. Always hold 
the device by the casing! 

y   Unpack all the individual parts. 

y   Check the delivery for damage incurred during transportation. 

y   Check whether the delivery agrees with the details in the delivery note. 
The complete LCD monitor package includes: 
– one monitor 
– data cable 
–  one power cable 
–  one Warranty Booklet 
–...

LCD monitor 
6 - English Edition 2 
Connecting the monitor 
!
Please take note of the safety information in the "Important notes" chapter. 
CE conformance and optimum picture quality are guaranteed only if you use the data cable 
supplied.
Do not cover the ventilation openings of the monitor. 
The computer power plug must be pulled out! 

y   Be sure that the monitor and the computer are switched off. 
Connecting cables to the monitor 

y   If the data cable is not firmly connected to the...

LCD monitor 
Edition 2 English - 7 

y  Plug the power connector of the computer into a properly grounded mains outlet. 
i
When you start working with your monitor for the first time you should install the 
appropriate graphics drivers for your application software. Details of how to do this are 
provided in the documentation on your screen controller/the associated driver software. 
Operation of the monitor 
Adjusting rake 
The rake of the monitor can be adjusted forward and back from its vertical...

LCD monitor 
8 - English Edition 2 
Troubleshooting
Should an error occur, first check the following points. If the distortion is still not eliminated, the 
monitor should, if possible, be checked on another computer. 
If you are unable to solve the problem, please inform our help desk. 
Having this problem?  Check the following points: 
No screen display 
(power indicator does not light)  
y
  Check whether the monitor is switched on. 

y   Check whether the power cable on the monitor is 
connected...

LCD monitor 
Edition 2 English - 9 
Having this problem?  Check the following points: 
Picture is shaking 
y  Check whether the data cable for the monitor is 
correctly attached to the monitor port on the 
computer.

y   Carry out the auto-adjustment of the monitor (with 
the AUTO button - if present - or via the OSD menu). 
Picture disturbances (vertical lines) 
y  Carry out the auto-adjustment of the monitor (with 
the AUTO button - if present - or via the OSD menu). 
Picture disturbances 
(horizontal...

LCD monitor 
10 - English Edition 2 
Assembling the monitor base 
!
The display surface of the LCD monitor is sensitive to pressure and scratches. Therefore, 
lay the monitor on a soft surface when mounting or removing the monitor base.