Fujitsu Fuji Xt10 Instruction Manual

65
More on Photography and PlaybackThe DRIVE Dial
   2 Select one of the following options using a function button (P 45; at default settings, bracketing 
program selection is assigned to the Fn3  button) or the shooting menu (P 98).
OptionOptionDescriptionDescription
AE BKTAE BKTSelect a bracketing amount.  Each time the shutter button is pressed, the camera will take three shots: 
one using the metered value for exposure, the second overexposed by the selected amount, and the third 
underexposed by the...

66
The DRIVE Dial
 Continuous Shooting (Burst Mode) Continuous Shooting (Burst Mode)
Capture motion in a series of pictures.
 1 Rotate the DRIVE dial to select CH (high-speed 
burst) or CL (low-speed burst).
 2 Take photographs.  The camera will take pic- tures while the shutter button is pressed; 
shooting ends when the shutter button is re-
leased, the maximum number of pictures has 
been taken, or the memory card is full.
 
R Frame rate varies with the subject, shutter speed, 
sensitivity, and focus...

67
More on Photography and PlaybackThe DRIVE Dial
 Advanced Filters Advanced  Filters
Take photos with fi lter eff ects.
 1 Rotate the DRIVE dial to Adv.1  or Adv.2.
   2 Select one of the following options using a 
function button (P 45; at default settings, fi  lter 
selection is assigned to the Fn3  button) or the 
shooting menu (P 98).
FilterFilterDescriptionDescription
  GG TOY CAMERA TOY CAMERA Choose for a retro toy camera 
eff
 ect.
  HH MINIATURE MINIATURE The tops and bottoms of pic-
tures are...

68
The DRIVE Dial
 Multiple Exposures Multiple  Exposures
Create a photograph that combines two exposures.
+
 1 Rotate the DRIVE dial to jj.
 2  Take the fi rst shot.
 3 Press MENU/OK.  The fi rst shot will be shown su-
perimposed on the view through the lens and 
you will be prompted to take the second shot.
 
R To return to Step 2 and retake the fi rst shot, 
press the selector left.  To save the fi rst shot and 
exit without creating a multiple exposure, press 
DISP/BACK.
 4  Take the second shot,...

69
More on Photography and PlaybackThe DRIVE Dial
 Panoramas Panoramas
Follow an on-screen guide to create a panorama.
 1 Rotate the DRIVE dial to uu.
 2 To select the size of the angle through which 
you will pan the camera while shooting, press 
the selector left.  Highlight a size and press 
MENU/OK.
 3  Press the selector right to view a choice of pan directions.  Highlight a pan direction and press 
MENU/OK.
 4 Press the shutter button all the way down to start recording.  There is no need to keep...

70
The DRIVE Dial
 
Q Panoramas are created from multiple frames; expo-
sure for the entire panorama is determined by the 
fi  rst frame.  The camera may in some cases record an 
greater or lesser angle than selected or be unable to 
stitch the frames together perfectly.  The last part of 
the panorama may not be recorded if shooting ends 
before the panorama is complete.
 
Q Shooting may be interrupted if the camera is panned 
too quickly or too slowly.  Panning the camera in a 
direction other than...

71
More on Photography and Playback Focus Mode Focus  Mode
Use the focus mode selector to choose how the camera focuses (note 
that regardless of the option selected, manual focus will be used when 
the lens is in manual focus mode).
• S (single AF): Focus locks while the shutter button is pressed halfway.  
Choose for stationary subjects.
•  C (continuous AF): Focus is continually adjusted to refl ect changes in the distance to the subject while 
the shutter button is pressed halfway.  Use for subjects...

72
Focus Mode
 
R  The camera can show focus distance in meters or feet.  Use the A  SCREEN SET-UP > FOCUS SCALE UNITS 
option in the setup menu (P 109) to choose the units used.
 
R If ON is selected for G  AUTOFOCUS SETTING > PRE-AF in the shooting menu (P 93), focus will be adjusted 
continuously in modes S and C even when the shutter button is not pressed.
 
■  The Focus Indicator
The focus indicator turns green when the subject is in focus and blinks white when 
the camera is unable to focus....

73
More on Photography and PlaybackFocus Mode
 
■  MF  Assist
The  c MF ASSIST option in the shooting menu can be used to check focus when pictures are framed 
in the LCD monitor or electronic viewfi nder in manual focus mode.
 
R The c  MF ASSIST menu can be displayed by pressing and holding the center of the rear command dial.
The following options are available:
• FOCUS PEAK HIGHLIGHT: Highlights high-contrast outlines.  Rotate the focus ring until 
the subject is highlighted.
• DIGITAL SPLIT IMAGE:...

74
Focus Mode
 Autofocus Options (AF Mode) Autofocus Options (AF Mode)
To choose the AF mode for focus modes S and C, press the function but-
ton (Fn2) to display the options shown below, then press the selector up 
or down to highlight an option and press  MENU/OK to select.
•  r  SINGLE POINT: The camera focuses on the subject in the selected 
focus point.  Use for pin-point focus on a selected subject.
•  y  ZONE: The camera focuses on the subject in the selected focus 
zone.  Focus zones include...