Fujitsu Fuji Xpro1 Owners Manual

25
Taking Photographs
 Shutter-Priority AE (S) Shutter-Priority AE (S)
To adjust shutter speed manually while letting the camera select 
aperture for optimal exposure, rotate the lens aperture ring to A 
and use the shutter speed dial (if A is currently selected for shut-
ter speed, press the dial release while rotating the shutter speed 
dial).  S will appear in the display.
 
Q If the correct exposure can not be achieved at the selected shutter 
speed, aperture will be displayed in red when the shutter...

26
 Aperture-Priority AE (A) Aperture-Priority AE (A)
To adjust aperture manually while letting the camera select shut-
ter speed for optimal exposure, rotate the shutter speed dial to A 
and use the lens aperture ring.  A will appear in the display.
 
Q If the correct exposure can not be achieved at the selected aper-
ture, the shutter speed will be displayed in red when the shutter but-
ton is pressed halfway.  Adjust aperture until the correct exposure is 
achieved.
 
Q If the subject is outside the...

27
Taking Photographs
 Manual Exposure (M) Manual Exposure (M)
Exposure can be altered from the value suggested by the cam-
era by rotating both the shutter speed dial and aperture ring to 
settings other than A (if A is currently selected for shutter speed, 
press the dial release while rotating the shutter speed dial).  M 
will appear in the display.
16    11    8    5.6    4    2.8 A
200MF5.6
2000M2000 F5 . 6200
Optical viewfi nder EVF/LCD
 
R The manual exposure display includes an exposure indicator...

28
 Long Time-Exposures (T/B) Long  Time-Exposures  (T/B)
Select a shutter speed of T (time) or B (bulb) for long time-exposures.
 
R Use of a tripod is recommended to prevent the camera from moving during the exposure.
 
R To reduce “noise” (mottling) in long time-exposures, select ON for K  LONG EXPOSURE NR in the shooting 
menu.  Note that this may increase the time needed to record images after shooting.
Time (T)Time (T)
 1  Rotate the shutter speed dial to T.
 2 Press the selector left or right to...

29
Taking Photographs
 Exposure Compensation Exposure  Compensation
Rotate the exposure compensation dial to adjust exposure when photographing very bright, 
very dark, or high-contrast subjects. The eff ect is visible in the LCD monitor and electronic 
viewfi  nder; when using the optical viewfi  nder, use the exposure indicator to check exposure.
Exposure compensation indicator
F5.62002000PP2000 F5 . 620020001F5.6
000100
P200
F
OVF EVFLCD
Choose positive values (+) to 
increase exposure
Choose negative...

30
 Focusing and Taking Pictures Focusing and Taking Pictures
Press the shutter button halfway to focus and the rest of the way down to shoot.
 1 Focus.Frame the picture with your subject in the center focus area and press the shutter button 
halfway to focus.
 
R If the subject is poorly lit, the AF-assist illuminator may light (P 72).
If the camera is able to focus , it will beep twice and focus area will glow green.  Focus and exposure will 
lock while the shutter button is pressed halfway.
 If the...

31
More on Photography
More on PhotographyMore on Photography
 F F Macro Mode (Close-ups) Macro Mode (Close-ups)
To focus at short distances, press the selector up (MACRO) and select F.  If the optical 
viewfi nder is on, the camera will automatically switch to the electronic viewfi nder 
(because of parallax, the optical viewfi nder is not recommended).  To exit macro 
mode, press the selector up left and select  OFF.
OFF
OFF
P
 
R The LCD monitor and electronic viewfi nder can be used to focus at short...

32
 White Balance White  Balance
For natural colors, select D WHITE BALANCE in the shooting menu to display the 
following options, then use the selector to highlight an option that matches the 
light source and press  MENU/OK.  The dialog shown at bottom right will be displayed; 
use the selector to fi ne-tune white balance or press DISP/BACK to exit without fi ne-
tuning (for an explanation of “white balance,” see the Glossary on page 109).WHITE BALANCEAUTO
SHIFTSET
WB SHIFT
SET...

33
More on Photography
White Balance
    hh: Custom White Balance: Custom White Balance
Choose 
h to adjust white balance for unusual lighting conditions.  White balance measurement options will 
be displayed; frame a white object so that it fi lls the display and press the shutter button all the way down to 
measure white balance (to select the most recent custom value and exit without measuring white balance, 
press DISP/BACK, or press MENU/OK to select the most recent value and display the fi...

34
 1 Press  the DRIVE button to display 
drive options.
CONTINUOUS6fps3fps
 2 Press the selector up or down to  choose from frame rates of approxi-
mately  6 fps (frames  per second) 
and  3 fps, and press left or right 
to choose the number of shots per 
burst.
 3 Press the shutter button halfway to  focus.
 4 Press the shutter button the rest of the way down to start shoot-
ing. Shooting ends when the shut-
ter button is released, the selected 
number of pictures has been taken, 
or memory is full....