Fujitsu E19 6 Led Operating Manual

							
  
  
 
 
 Operating Manual 
LCD Monitor  
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
						

							
 
 
Copyright © Fujitsu Technology Solutions GmbH 2011 
VESA, DDC and DPMS are registered trademarks of Video Electronics Standards 
Association. 
All other trademarks used in this document ar e trademarks or registered trademarks of their 
respective owners and are rec ognised as being protected. 
All rights, including rights of translation, reproduc tion by printing, copying or similar methods, 
even of parts are reserved. 
Offenders will be liable for damages. 
All rights, including rights created by patent grant  or registration of a utility model or design, 
are reserved. 
Delivery subject to availability. Right  of technical modification reserved. 
 
 
						

							
   
Contents 
Introduction........................................................................\
................................................................. 1 Target group ........................................................................\
................................................................. 1 Notational conventions ........................................................................\
................................. ................ 1 Additional information ........................................................................\
................................................... 1 
Important notes ........................................................................\
.......................................................... 2 Safety notes........................................................................\
.................................................................. 2 Power cable ........................................................................\
.................................................................. 3 Transport ........................................................................\
...................................................................... 3 Cleaning ........................................................................\
....................................................................... 4 CE marking ........................................................................\
................................................................... 4 FCC Class B Compliance Statement ........................................................................\
................... 4 Checking the contents of the consignment................................\
....................................................... .... 5 
Connecting the monitor ........................................................................\
............................................. 6 Connecting cables to the monitor ........................................................................\
....................... .......... 6 Connecting cables to the computer ........................................................................\
...................... ........ 6 
Operation of the monitor........................................................................\
............................... ............. 7 Adjusting rake ........................................................................\
......................................... ...................... 7 Switching the monitor on/off ........................................................................\
........................... .............. 7 Troubleshooting ........................................................................\
............................................................ 8 
Explanatory information about standard ISO 9241-3 .................................................................... 10 Lit or unlit pixels ........................................................................\
.................................... ...................... 10  
Fujitsu Technology Solutions   
 
						

							
  
 Fujitsu Technology Solutions 
 
						

							
Introduction 
Introduction 
This manual contains important information  for correct set-up of your LCD monitor.  
The LCD monitor is actuated from the PC. The scr een controller/the associated driver software is 
responsible for setting the modes  (resolution and refresh rate). 
When putting the monitor into operation for the fi rst time, the screen display should be optimally 
adapted to the screen controller used and adjusted in accordance with your needs. 
Target group 
You dont need to be an expert to perform the oper ations described here. However, please observe 
the safety information given in the operating in structions of the computer and in this manual! 
In the event of any problems occurring, please c ontact your sales outlet or our Service desk. 
Notational conventions 
The meanings of the symbols and fonts used in this manual are as follows: 
 
! 
Pay particular attention to text marked with this symbol. Failure to observe this warning 
endangers your life, destroys the device, or may lead to loss of data. 
 
i 
Supplementary information, remarks, and tips follow this symbol. 
 ►   Text which follows this symbol describes activi ties that must be performed in the order shown. 
Quotation marks indicate names of chapters or terms. 
This font  indicates filenames and menu items. 
This font  indicates screen outputs. 
Additional information 
Details of how you set the resolution and refresh rate are provided in the documentation on your 
screen controller/the associated driver software. 
Fujitsu Technology Solutions  1 
 
						

							
 Important notes 
Important notes 
! 
In this chapter you will find information regardi ng safety which is essential to take note of 
with your monitor. 
Safety notes 
This device complies with the relevant safety  regulations for data processing equipment, including 
electronic office machines for use in an office  environment. If you have any questions, contact your 
sales outlet or our Service desk. 
●   The display surface of the LCD monitor is  sensitive to pressure and scratches. You should 
therefore be careful with the display surface  so as to avoid lasting damage (Newton rings, 
scratches). 
●   If the device is brought into the installation  site from a cold environment, condensation can 
form. Before operating the device, wait until it  is absolutely dry and has reached approximately 
the same temperature as the installation site. 
●   To ensure sufficient ventilation, the intake  and exhaust air openings of the monitor must never 
be blocked. 
●   The monitor automatically sets itself to a mains voltage in the range of 100 V to 240 V. Ensure 
that the local mains voltage lies within these limits. 
●  Ensure that the power socket on the device or  the grounded mains outlet is freely accessible. 
●  The ON/OFF switch does not disconnect the devic e from the mains voltage. To completely 
disconnect the mains voltage, remove the power plug from the socket. 
●   The monitor is equipped with a power cable that complies with safety standards. 
●  Lay all cables so that nobody can stand on them  or trip over them. When attaching the device, 
observe the relevant notes in the Connecting the monitor chapter. 
●   Wenn Sie eine andere als die mitgelieferte  Datenleitung verwenden, achten Sie darauf, dass 
die Leitung ausreichend abgeschirmt ist. CE-Konf ormität sowie eine optimale Bildqualität 
werden nur mit der mitgelieferten Datenleitung gewährleistet. 
●   If you use a different data cable from the one  supplied, ensure that it is adequately shielded. 
CE conformance and optimum picture quality  are guaranteed only if you use the data cable 
supplied. 
●   No data transfer cables  should be connected or disconnec ted during a thunderstorm. 
●  Make sure that no objects (e.g. jewellery chai ns, paper clips, etc.) or liquids get inside the 
device (danger of electric  shock, short circuit). 
●  The device is not waterproof! Never immerse the device in water and protect it from spray 
water (rain, sea water). 
●  In emergencies (e.g. damaged casing, elements or  cables, penetration of liquids or foreign 
matter), switch off the unit, disconnect the power plug and contact your sales outlet or our 
Service desk. 
2  Fujitsu Technology Solutions 
 
						

							
Important notes 
●  The monitor must be disposed of in accordance  with the local regulations for disposal of 
special waste. The screen background lighting c ontains mercury. You must observe the 
applicable handling and disposal safety  regulations for fluorescent tubes. 
●  Only qualified technicians  should repair the device. Unaut horised opening and incorrect repair 
may greatly endanger the user (electric shock, fire risk). 
●   Use a screen saver with moving images and acti vate the power management for your monitor 
to prevent still images from burning in. 
●   The screen may only be operated in the wide format (0° landscape mode). Turning with a 
swivel arm or wall bracket mounted is not permitted. 
●  Store this manual close to the device. If y ou pass the device on to third parties, you should 
pass this manual on with it. 
●   We recommend that you place your device on a dur able, non-slip surface. In view of the many 
different surface coatings and finis hes used on furniture, it is possible that the feet of the device 
could mark the surface they stand on. 
Power cable 
To guarantee safe operation, use the cable supplied. Us e the following guidelines if it is necessary to 
replace the original cable set. 
●   The female/male receptacles of the cord set must meet IEC60320/CEE-22 re\
quirements. 
●  The cable has to be HAR-certified or VDE-ce rtified. The mark HAR or VDE will appear on the 
outer sheath. 
●   For devices which are mounted on a desk or tabl e, type SVT or SJT cable sets may be used. 
●  The cable set must be selected according to the rated current for your device. 
●  If necessary, replace the original power c able with a regular grounded 3-core mains lead. 
Transport 
●  Transport the monitor with care and only in  its original packaging or another corresponding 
packaging fit to protect it against knocks and jolts. 
●   Never drop the LCD monitor (danger of glass breakage). 
Fujitsu Technology Solutions  3 
 
						

							
 Important notes 
Cleaning 
●  Always pull out the power plug before you clean the monitor. 
●  Do not clean any interior parts yourself,  leave this job to a service technician. 
●  Do not use any cleaning agents that cont ain abrasives or may corrode plastic. 
●  Ensure that no liquid will run into the system. 
●  Ensure that the ventilation areas of the monitor are free. 
●  The display surface of the LCD monitor is s ensitive to pressure and scratches. Clean it only 
using a soft, slightly moistened cloth. 
Wipe the monitor casing with a dry cloth. If the moni tor is particularly dirty, use a cloth which has 
been moistened in mild domestic detergent and then carefully wrung out. 
CE marking 
 
The shipped version of this device complies wi th the requirements of the EC directives 
2004/108/EC Electromagnetic compatibility and 2006/95/EEC Low voltage directive. 
FCC Class B Compliance Statement 
The following statement applies to the products covered in this manual, unless othe\
rwise specified 
herein. The statement for other products w ill appear in the accompanying documentation. 
NOTE: 
This equipment has been tested and found to comply with the limits for a Class B digital device, 
pursuant to Part 15 of the FCC rules and meets all requirements of the C\
anadian Interference-
Causing Equipment Standard ICES-003 for digital  apparatus. These limits are designed to provide 
reasonable protection against harmful  interference in a residential installation. This equipment 
generates, uses and can radiate r adio frequency energy and, if not installed and used in strict 
accordance with the instructions, may cause harmful  interference to radio communications. However, 
there is no guarantee that interference will not occur  in a particular installation. If this equipment does 
cause harmful interference to radio or television  reception, which can be determined by turning the 
equipment off and on, the user is encouraged to try to correct the interference by one or more of the 
following measures: 
●   Reorient or relocate the receiving antenna. ●  Increase the separation between equipment and the receiver. ●  Connect the equipment into an outlet on a circuit different from that to which the receiver is 
connected. 
●  Consult the dealer or an experienced  radio/TV technician for Service. 
Fujitsu Technology Solutions GmbH is not responsib le for any radio or television interference caused 
by unauthorised modifications of this equipment or the substituti on or attachment of connecting 
cables and equipment other than t hose specified by Fujitsu Technology Solutions GmbH. The 
correction of interferences caused by such unauthoris ed modification, substitution or attachment will 
be the responsibility of the user. 
4  Fujitsu Technology Solutions 
 
						

							
Important notes 
Checking the contents of the consignment 
! 
The display surface of the LCD monitor is  sensitive to pressure and scratches. Always 
hold the device by the casing! 
 ►   Unpack all the individual parts. 
►  Check the delivery for damage incurred during transportation. 
Check whether the delivery agrees with the details in the delivery note. 
The complete LCD monitor package includes: 
– one monitor 
– data cable 
–  one power cable 
–  one Warranty Booklet 
–  this Getting Started manual 
Should you discover that the delivery does not corres pond to the delivery note, notify your local sales 
outlet immediately. 
 
i 
We recommend that you keep the origi nal packaging material. You may need the 
packaging in the future if you need to transport your device. 
Fujitsu Technology Solutions  5 
 
						

							
 Connecting the monitor 
Connecting the monitor 
! 
Please take note of the safety information in the Important notes chapter. 
CE conformance and optimum picture quality are guaranteed only if you use the data 
cable supplied. 
Do not cover the ventilation openings of the monitor. 
The computer power plug must be pulled out! 
 ►  Be sure that the monitor and the computer are switched off. 
Connecting cables to the monitor 
►  If the data cable is not firm ly connected to the monitor: 
Connect one of the connectors of the data cabl e to the D-SUB connector on the monitor and 
secure the plug-in connection by tightening the locking screws. 
►   Plug the power cable supplied into  the power connector of the monitor. 
Connecting cables to the computer 
Information on the computer connections and interfaces is contained in the operating manual for your 
computer. 
 
i 
If your computer has two monitor ports (onboard screen controller and separate 
graphics card), the monitor port for the s eparate graphics card is usually active. 
 ►  Connect the data cable to the (active) monito r port on the computer and secure the plug-in 
connection by tightening the safety screws. 
►   Connect the connector of the power cable s upplied into a properly earthed mains outlet and 
ensure a secure connection. 
►   Plug the power connector of the computer into a properly grounded mains outlet. 
 
i 
When you start working with your monitor  for the first time you should install the 
appropriate graphics drivers for your application  software. Details of how to do this are 
provided in the documentation on your screen controller/the associated driver software. 
6  Fujitsu Technology Solutions