Fujitsu B24w 5 Eco Operating Manual

							Troubleshooting
Having this problem? Check the following points:
Picture disturbances (verticallines)
►Press theEXIT / AUTObutton to perform
auto-adjustment of the screen.
Picture disturbances (horizontal lines, picture
noise)►Press theEXIT / AUTObutton to perform
auto-adjustment of the screen.
The screen becomes darker
The background lighting has a limited lifetime.
If your monitor display should become too dark,
the background lighting will have to be replaced.
►Please contact our help desk.
A26361-K1334-Z220-1-7619, edition 1 23
 
						

							Explanatory information about standard ISO 9241-3
Explanatory information about
standard ISO 9241-3
Lit or unlit pixels
Today’s production techniques cannot guarantee an absolutely fault-free screen display. A
few isolated pixels may be constantly lit or unlit. The maximum permitted number of faulty
pixels is stipulated in the international standard ISO 9241-3 (Class I).
Examples:
A24flat-screen monitor with a resolution of 1920 x 1200 has 1920 x 1200 = 2,304,000 pixels. Each
pixel consists of three subpixels (red, green and blue), so there are almost 6.9 million subpixels in
total. According to ISO 9241-3 (Class I), a maximum of 2 lit and 2 unlit pixels plus 6 lit or 12 unlit
subpixels, or a corresponding combination, may be faulty (1 lit subpixels counts as 2 unlit subpixels).
Pixel
A pixel consists of 3 subpixels, normally red, green and blue. A pixel is
the smallest element that can be generated by complete functionality of
the display.
SubpixelA subpixel is a separately addressable internal structure within a pixel that
enhances the pixel function.
24 A26361-K1334-Z220-1-7619, edition 1
 
						

							Technical data
Technical data
Condensation is not permitted, neither in the rated range of operation
nor in the limit range of operation.
B24W-5 ECO
Dimensions and weight
Visible diagonals 61 cm
Dot pitch 0.27 mm
Width 518.4 mm Image size
Height 320.4 mm
Maximum resolution 1920 x 1200
Width 558 mm
Height 414 mm - 523 mm Dimensions incl. monitor base
Depth 212 mm
Weight (without packaging)approx. 7.9 kg
Storable display modes28
Pixel error classes according to
ISO 9241-3ClassI
Electrical data
Analog
Positive, 0.7 V
pp,75Ω Video
Digital DVI-D
Synchronisation Separate sync. TTL, positive or negative
Horizontal frequency 31 kHz .... 82 kHz (multi-scanning)
Refresh rate56 Hz .... 76 Hz
Maximum pixel rate 195 MHz analogue, 165 MHz digital
Power supply
Switches automatically
100 V – 240 V, 50 Hz – 60 Hz
Normal
operation
						

							Technical data
Ambient conditions
Environment class 3K2, DIN IEC 721
Rated range of operation
Humidity15℃.... 35℃
20 % .... 85 %
Limit range of operation
Humidity5 °C .... 35 °C
20 % .... 85 %
VESA-DDC-compatible VGA interface
Your monitor is equipped with a VESA-DDC-compatible VGA interface. VESA-DDC (Video
Electronics Standard Association, Display Data Channel) is used as the communications
interface between the monitor and the computer. If the computer is equipped with a
VESA-DDC-compatible VGA interface, it canautomatically read the data for ensuring
optimum operation from the monitor and select the appropriate settings.
Preset operating modes
The picture position and size have been optimised at the factory for the operating
modes listed above. Depending on the graphics card used, it may be necessary
to adjust the display position or size. In this case you can change and save the
settings (see chapter
Changingthemonitorsettings,Page15).
For ergonomic reasons,a screen resolution of 1920 x 1200 pixels is recommended.
Due to the technology used (active matrix) an LCD monitor provides a totally
flicker-free picture even with a refresh rate of 60 Hz.
Most frequent operating modes
Horizontal frequency Refresh rate Screen resolution
31.5 kHz 70 Hz 720 x 400
31.5 kHz 60 Hz 640 x 480
37.5 kHz 75 Hz 640 x 480
37.9 kHz 60 Hz 800 x 600
46.9 kHz 75 Hz 800 x 600
48.4 kHz 60 Hz 1024 x 768
60.0 kHz 75 Hz 1024 x 768
65.0 kHz 60 Hz 1680 x 1050
74.0 kHz 60 Hz 1920 x 1200
26 A26361-K1334-Z220-1-7619, edition 1
 
						

							Technical data
D-SUB port
6 10
11 1551
Pin Meaning
1 Video input red
2 Video input green
3 Video input blue
4
Ground
5
Ground
6 Video ground red
7
Video ground green
8 Video ground blue
9
+5 V (DDC)
10
Sync. ground
11
Ground
12
DDC Data
13 H. sync
14 V. sync
15
DDC Clock
A26361-K1334-Z220-1-7619, edition 1 27
 
						

							Technical data
DVI-D port
91
17
Pin Meaning
1
TMDS Data2–
2
TMDS Data2+
3
TMDS Data 2/4 Shield
4 not connected
5
not connected
6
DDC Clock
7
DDC Data
8
Analog Vertical Sync
9
TMDS Data1–
10
TMDS Data1+
11
TMDS Data 1/3 Shield
12 not connected
13 not connected
14 +5V Power
15 Earth
16 Hot Plug Detect
17
TMDS Data0–
18
TMDS Data0+
19
TMDS Data 0/5 Shield
20 not connected
21 not connected
22
TMDS Clock Shield
23
TMDS Clock+
24
TMDS Clock–
28 A26361-K1334-Z220-1-7619, edition 1