Fujitsu B22w 6 Led Operating Manual
Have a look at the manual Fujitsu B22w 6 Led Operating Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 86 Fujitsu manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Operation Adjusting the volume Call theAudiosetting window Vo l u m e Set the volume for playback with the integrated loudspeakers Mute Switch the loudspeakers off or on Setting the colour temperature and colours Call theColoursetting window Select the colour temperature The warmth of the screen colours is set using the colour temperature. The colour temperature is measured in Kelvin (K). You can choose between sRGB,6500 K, 7500 K,9300 K,NativeandCustom Colour . In the user-de fined setting you can change the colour ratios of the basic colours (red, green, blue) as required. Adjusting the displ ay of the OSD menu Calling the OSD Setupadjustment window Language Selecting the language for the OSD menu With this function you select the language for the OSD menu. The default setting is English. OSD TimeoutSetting the display duration of the OSD menu With this function you can select a value from 10 to 120 seconds. If the set time expires without a setting being made, the OSD menu is automatically hidden. OSD RotationWith this function you switch the OSD menu from portrait mode to landscape mode and vice versa. On = The OSD menu is displayed in portrait mode. Off = The OSD menu is displayed in landscape mode. Fujitsu Technology Solutions 27
Operation Setting functions in the Advanced menu Call up theAdvancedsetting window Input select Selecting the input signal This function allows you to switch the monitor from analogue to digital mode and vice versa, when several signal sources are connected. This requires that the graphic card used supports this function. DDC-CI Activation/deactivation of the DDC-CI On= The DDC-CI function is enabled (standard setting) Off = The DDC-CI function is disabled Factory Recall Activating the factory settings With this function all settings are reset to the factory settings without prompting for confirmation. Press the button to activate the function. The message Auto Processing is displayed. Displaying information Call theInformation setting window With this function the model designation, serial number, resolution, H/V frequency, input signal, colour setting and polarity of the synchronisation signal are displayed. 28 Fujitsu Technology Solutions
Notes on ergonomic colour adjustment Notes on ergonomic colour adju stment If you select colours for the monitor in your application programmes, take note of the information below. The primary colours blue and red on a dark background do not produce the minimum required contrast of 3:1 and are therefore not suitable for continuous text and data entry. When using several colours for characters and b ackground and giving the primary colours full modulation, you can obtain very suitable colour combinations (see the following table): Characters Backgroundblack white purple blue cyan green yellow red black ++ - +++ - white+++ --- + purple++ -- -- - blue- +- +- + - cyan +-- + -- - green +-- +--- yellow + - ++ -- + red- +--- - + + Colour combination very suitable - Colour combination not suitable because colour hues are too close together, thin characters are not identifiable or rigorous focusing is demanded of the human eye. Fujitsu Technology Solutions 29
Troubleshooting Troubleshooting Should an error occur,first check the following points. If the distortion is still not eliminated, the monitor should, if possible, be checked on another computer. If you cannot solve the problem, please contact our Service Desk. Having this problem? Check the following points: No screen display Power indicator does not light up ► Check whether the ON/OFF switch on the monitor is switched on. ► Check whether the power c able on the monitor is connected co rrectly. ► Check whether the computer is switched on. No screen display Power indicator is lit ► Check whether the computer is switched on. ► Check whether the data cable for the monitor is correctly attached to the monitor port on the computer. ► Press any key on the computer keyboard. The computer may be in power saving mode. ► Alter the brightness and/or contrast until you get a picture. Message: No Signal ►Check whether the data cable for the monitor is correctly attached to the monitor port on the computer. ► Check whether the computer is switched on. Message: Frequency out of range: ## kHz / ## Hz Please change the display mode to 1680 x 1050 with 60 Hz (B22W-6 LED) or Frequency out of range: ## kHz / ## Hz Please change the display mode to 1280 x 1024 with 60 Hz (B19-6 LED) The input signal (horizontal frequency and refresh rate) at the displayed input does not correspond to the technical data for the monitor. ► Adjust the video frequency range using the computer software (see documentation for the computer or display adapter). ► Set a diff erent screen resolution using the computer software (see documentation for the comp uter or display adapter). Pictureposition not correct The monitor recognises an undefined mode (see chapter Technicalspecification,Page33). ► Press the AUTObutton to conduct the auto-adjustment of the screen. Picture is shaking ►Check whether the data cable for the monitor is correctly attached to the monitor port on the computer. ► Press the AUTObutton to conduct the auto-adjustment of the screen. Picture is wrongly adjusted ►Press theMENUbutton to activate the Factory Recall function. The Auto Processing message appears. 30 Fujitsu Technology Solutions
Troubleshooting Having this problem?Check the following points: Picture disturbances (vertical lines)► Press theAUTObutton to conduct the auto-adjustment of the screen. Picture disturbances (horizo ntal lines, picture noise) ► Press theAUTObutton to conduct the auto-adjustment of the screen. The screen becomes darker The background lighting has a limited lifetime. If your monitor display should become too dark, the background lighting will have to be replaced. ►Contact our Service Desk. Fujitsu Technology Solutions 31
Explanatory information about standard ISO 9241-307 Explanatory information abou t standard ISO 9241-307 Permanently unlit or lit pixels Today’s production techniques cannot guarantee an absolutely fault-free screen display. Depending on the total number of pixels (resolution), there may be a few constantly lit or unlit pixels or subpixels. Pixel A pixel consists of 3 subpixels, normally red, green and blue. A pixel is the smallest element that can be generated by complete functionality of the display. SubpixelA subpixel is a separately addressable int ernal structure within a pixel that enhances the pixel function. The maximum permitted number of faulty pixels is stipulated in the international standard ISO 9241-307. In accordance with standard ISO 9241-3, LCD monitors by Fujitsu comply with Class II for low resolutions and Class I for resolutions of 1680 x 1050 (1764000 pixel) and higher. Examples: A flat-screen monitor with a resolution of 1280 x 1024 has 1280 x 1024 = 1310720 pixels. Each pixel consists of three subpixels (red, green and blue), so there are almost 3.9 million subpixels in total. According to ISO 9241-3 (Class II), a maximum of 3 lit and 3 unlit pixels plus 7 lit or 13 unlit subpixels, or a corresponding combination, may be faulty (1 lit subpixel counts as two unlit subpixels). A flat-screen monitor with a resolution of 1920 x 1080 has 1920 x 1080 = 2073600 pixels. Each pixel consists of three subpixels (red, green and blue), so there are almost 6.2 million subpixels in total. According to ISO 9241-3 (Class I), a maximum of 2 lit and 2 unlit pixels plus 5 lit or 10 unlit subpixels, or a corresponding combination, may be faulty (1 lit subpixel counts as two unlit subpixels). 32 Fujitsu Technology Solutions
Technical specification Technical speci fication Condensation is not permitted, neither in the rated range of operation nor in the limit range of operation. B19-6 LED B22W-6 LED Dimensions and weight Visible diagonals 48.16 cm 55.9 cm Dot pitch 0.098 mm 0.282 mm Width 376 mm 473.76 mm Image size Height 301 mm 296.1 mm Maximum resolution 1280 x 1024 1680 x 1050 Width 410 mm 508 mm Height 374 mm 369 mm Dimensions incl. monitor base Depth 180 mm 180 mm Weight (without packaging) approx. 5.0 ± 0.2 kg approx. 5.8 ± 0.2 kg Storable di splay modes 24 23 Pixel erro rclasses according to ISO 9241-307 Class II Electric al data Analogpositive, 0.7 V ss,75ΩPositive, 0.7 Vpp,75 Ω Video DigitalDVI-D with HDCP DVI-D/DP with HDCP Synch ronisation Separate sync. TTL, posit ive or negative Separ ate Sync. TTL, posit ive or negative Horizontal frequency 31 kHz .... 81 kHz (mul ti-scanning) 30 kH z .... 82 kHz (mul ti-scanning) Refresh rate 56 Hz .... 76 Hz 56 Hz .... 76 Hz Maximum pixel rate 135 MHz 165 MHz Power supply 100 V – 240 V, 50Hz–60Hz100 V – 240 V, 50 Hz – 60 Hz Normal operation < 25 W < 28 W ECO operating mode
Technical specification Ambient conditions B19-6 LEDB22W-6 LED Environment class 3K2, DIN IEC 721 Rated range of operation Humidity Limit range of operation 5 °C .... 35 °C 15% .... 85 % 5 °C .... 35 °C5 °C .... 35 °C 15% .... 85 % 5 °C .... 35 °C VESA-DDC-compatible VGA interface Your monitor is equipped with a VESA-DDC-compatible VGA interface. VESA-DDC (Video Electronics Standard Association, Display Data Channel) is used as the communications interface between the monitor and the computer. If the computer is equipped with a VESA-DDC-compatible VGA interface, it can automatically read the data for ensuring optimum operation from the monitor and select the appropriate settings. Preset operating modes The picture position and size have been optimised at the factory for the operating modes listed above. Depending on the graphics card used, it may be necessary to adjust the display position or size. In this case you can change and save the settings (see chapter Changingthemonitorsettings,Page20). For ergonomic reasons, we recommend a screen resolution of 1680 x 1050 pixels (B22W-6 LED) or 1280 x 1024 pixels (B19-6 LED). Because of the technology used (active matrix), an LCD monitor provides a totally fl icker-free picture, even with a refresh rate of 60 Hz. Most frequent operating modes Horizontal frequency Refresh rateScreen resolution 31.5 kHz 70 Hz720 x 400 31.5 kHz 60 Hz640 x 480 37.5 kHz 75 Hz640 x 480 37.9 kHz 60 Hz800 x 600 46.9 kHz 75 Hz800 x 600 48.4 kHz 60 Hz1024 x 768 60.0 kHz 75 Hz1024 x 768 63.7 kHz 60 Hz 1280 x 1024 (native B19-6 LED) 80.3 kHz 75 Hz1280 x 1024 65.0 kHz 60 Hz 1680 x 1050 (native B22W-6 LED) 34 Fujitsu Technology Solutions
Technical specification SUB D port 6 10 11 15 51 Pin Meaning 1 Video input red 2 Video input green 3 Video input blue 4 Ground 5 Ground 6 Video ground red 7Video ground green 8 Video ground blue 9 +5 V (DDC) 10Sync. ground 11Ground 12 DDC Data 13 H. sync 14 V. sync 15DDC Clock Fujitsu Technology Solutions 35
Technical specification DVI-D port 91 17 Pin Meaning 1 TMDS Data2– 2TMDS Data2+ 3 TMDS Data 2/4 Shield 4 not connected 5not connected 6DDC Clock 7 DDC Data 8Analog Vertica l Sync 9 TMDS Data1– 10TMDS Data1+ 11 TMDS Data 1/ 3 Shield 12 not connec ted 13 not connected 14 +5V Power 15 Earth 16 Hot Plug Detect 17 TMDS Data0– 18TMDS Data0+ 19 TMDSData 0/5 Shield 20 not connected 21 not connected 22 TMDS Clock Shield 23 TMDS Clock+ 24TMDS Clock– 36 Fujitsu Technology Solutions