Fujitsu B22w 6 Led Operating Manual

Getting started
B19-6 LED
1
1
2
3456
1=Holesfor fixing swivel arm or wall bracket
2 = Security slot for the Kensington Lock
3 = Power connector 4 = AUDIO-IN socket
5 = DVI-D connector (DIGITAL)
6 = D-SUB socket (ANALOG)
► Select the appropriate data cable for your computer.
► Connect one of the connectors of the data cable to the D-SUB socket,
DVI-D socket or the DisplayPort socket of the monitor and secure the plug
connection by tightening the retaining screws.
The monitor automatically detects the input...

Getting started
Connecting cables to the computer
Information on the computer connections and interfaces is contained in the
operating manual for your computer.
►Connect the data cable to the (active) monitor port on the computer and secure
the plug-in connection by tightening the safety screws.
► Insert the other plug of the audio cable in the audio output of the computer.
► Plug the power connector of the monitor into a properly grounded mains outlet.
► Plug the power connector of the computer into a...

Operation
Operation
Switching the device on and off
12
3
1 = Buttons for the OSD menu (On-Screen Display)
2 = Power suppl y indicator 3 = ON/OFF switch
The colour of the LED indicator changes as follows: LED indicator Status
blue Monitor and computer are switched on (normal mode).
green
Monitor and computer are switched on (ECO mode).
orangeThe monitor is not receiving a video signal or is switching to power
saving mode (indication approx. 2 seconds).
does not light upThe monitor is switched off (or is...

Operation
Notes on power management
If your computer is equipped with power management (power-saving mode), the monitor can fully
support this function. Here the monitor does not di stinguish between the individual energy-saving
modes of the computer (standby mode, sus pend mode and OFF mode), as it is capable of
immediately switching into the mode with the highest energy-saving effect.
Stage Operation Power saving mode
Normal
ECO
Power supply
indicatorLights up blue illuminated green
orange
Display
Max....

Operation
Changing the monitor settings with the buttons
of the control panel
The buttons of the control panel have two functions. When the OSD menu is not
activated, you can call up quick start functions which are printed on the buttons. When the
OSD menu is activated, the navigation buttons (softkeys) displayed on the monitor apply.
1234
1 = Buttons for the OSD menu (On
Screen Display)
2 = ON/OFF switch 3 = Power supply indicator
4 = Softkeys
Fujitsu Technology Solutions
21
 

Operation
Softkeys
Switch to submenu
Start (withAuto levelandFactory recall )
Navigation within a menu
Select option
+-Change value
Apply changes and return to main menu
Reject changes and return to main menu
Exit the OSD menu
Language selection
The OSD menu is available in various languages.
A language selection is displayed immediately after you switch the display on.
►Select your desired language.
You can change the language using the OSD Languagefunction in the OSD Setupmenu.
Performing...

Operation
Activate/deactivate ECO operating mode
The power consumption of the device can be decreased by reducing
the brightness of the picture.
► Press the
ECObutton to switch the ECO operating mode on or off.
The message ECO Mode ein orECO Mode off appears.
If the ECO operating mode is activated, the following OSD settings are changed:
Mode Office
Colour 6500K
Brightness reduced
After the ECO operating mode is switched off, the b rightness previously set by the user is restored.
Locking the OSD menu...

Operation
Changing the monitor settings using the OSD menu
With the buttons on the control panel, you can call up and use the integrated
OSD (On-Screen Display) menu.
The English menu names are used in the following description (default setting).
►Press theMENUbutton to activate the OSD menu.
The main menu appears, with icons for the setting functions.
The first symbol, ( Brightness/Contrast ), is highlighted and the associated functions
are visible in the right-hand menu field.
► Press the...

Operation
►Press theMENUbutton to select the highlighted icon.
The Image adjust setup window will be displayed.
► Press the
ECOorINPUTbutton to highlight another function.
► Press the
orbutton to change a value or make a selection.
► Press the
MENUbutton to apply the changes and quit the function.
► Press the
AUTObutton to reject the changes and quit the function.
► Press the
AUTObutton to exit the OSD menu.
If you want to change other settings, select the corresponding function from the OSD
main menu....

Operation
Adjusting the brightness and contrast
Call up theBrightness/Contrast setting window
Brightness
Set the brightness of the display
With this function you can change the brightness of the background lighting.
Contrast
Set the contrast of the display
With this function you can modify the contrast of pale colours.
Black levelSet the brightness of the display
With this function you modify the contrast of dark colours.
Auto levelAdjust the signal level
With this function you can automatically set the...