Fujitsu B19 6 Led Operating Manual

							Getting started
B19-6 LED
1
1
2
3456
1=Holesfor fixing swivel arm or wall bracket
2 = Security slot for the Kensington Lock
3 = Power connector 4 = AUDIO-IN socket
5 = DVI-D connector (DIGITAL)
6 = D-SUB socket (ANALOG)
► Select the appropriate data cable for your computer.
► Connect one of the connectors of the data cable to the D-SUB socket,
DVI-D socket or the DisplayPort socket of the monitor and secure the plug
connection by tightening the retaining screws.
The monitor automatically detects the input when only one signal source is connected.
► Insert one plug of the audio line in the AUDIO IN socket on the monitor
and make sure it is properly engaged.
► Plug the power cable supplied into the power connector of the monitor.
only for B22W-6 LED
► Plug the supplied USB cable into the USB IN socket and the other end of
the cable into a USB socket of the computer.
Connect the USB keyboard and USB mouse directly to the PC, as the USB connector
socket of the monitor is switched off in energy-saving mode.
Fujitsu Technology Solutions 17
 
						

							Getting started
Connecting cables to the computer
Information on the computer connections and interfaces is contained in the
operating manual for your computer.
►Connect the data cable to the (active) monitor port on the computer and secure
the plug-in connection by tightening the safety screws.
► Insert the other plug of the audio cable in the audio output of the computer.
► Plug the power connector of the monitor into a properly grounded mains outlet.
► Plug the power connector of the computer into a properly grounded mains outlet.
If your computer has two monitor ports (onb oard screen controller and separate
graphics card), the monitor port for the separate graphics card is active as standard.
18 Fujitsu Technology Solutions
 
						

							Operation
Operation
Switching the device on and off
12
3
1 = Buttons for the OSD menu (On-Screen Display)
2 = Power suppl y indicator 3 = ON/OFF switch
The colour of the LED indicator changes as follows: LED indicator Status
blue Monitor and computer are switched on (normal mode).
green
Monitor and computer are switched on (ECO mode).
orangeThe monitor is not receiving a video signal or is switching to power
saving mode (indication approx. 2 seconds).
does not light upThe monitor is switched off (or is in power saving mode - power
consumption in standby and off mode ≤0.5 W ).
Fujitsu Technology Solutions 19
 
						

							Operation
Notes on power management
If your computer is equipped with power management (power-saving mode), the monitor can fully
support this function. Here the monitor does not di stinguish between the individual energy-saving
modes of the computer (standby mode, sus pend mode and OFF mode), as it is capable of
immediately switching into the mode with the highest energy-saving effect.
Stage Operation Power saving mode
Normal
ECO
Power supply
indicatorLights up blue illuminated green
orange
Display
Max. brightness
typ. 200 cd/m2unlit
Power consumption
(typical)< 28 W (B22W–6 LED)
< 25 W (B19–6 LED) < 22 W (B22W–6 LED)
< 19 W (B19–6 LED)reduced to
≤0.5 W
reduced to ≤0.1 W
If your computer det ects inactivity (no input) it sends an appropriate signal to the monitor to
reduce the power con sumption (energy-saving mode). The power indicator of the monitor changes
colour to indicate the status change. ECO mode is the preset factory default.
Once an input is mad e at the computer the screen contents are restored.
For detailed information on how energy-saving mode operates, please refer to
the operating man ual or technical manual of the computer.
Changing the monitor settings
When putting the monitor into operation for the
first time, the screen display should
be optimally adapted to the display adapter used.
20 Fujitsu Technology Solutions
 
						

							Operation
Changing the monitor settings with the buttons
of the control panel
The buttons of the control panel have two functions. When the OSD menu is not
activated, you can call up quick start functions which are printed on the buttons. When the
OSD menu is activated, the navigation buttons (softkeys) displayed on the monitor apply.
1234
1 = Buttons for the OSD menu (On
Screen Display)
2 = ON/OFF switch 3 = Power supply indicator
4 = Softkeys
Fujitsu Technology Solutions
21
 
						

							Operation
Softkeys
Switch to submenu
Start (withAuto levelandFactory recall )
Navigation within a menu
Select option
+-Change value
Apply changes and return to main menu
Reject changes and return to main menu
Exit the OSD menu
Language selection
The OSD menu is available in various languages.
A language selection is displayed immediately after you switch the display on.
►Select your desired language.
You can change the language using the OSD Languagefunction in the OSD Setupmenu.
Performing auto-adjustment of the monitor
►Press theAUTObutton for about 1 second.
The Auto Processing message appears
Picture quality and position are set to optimum values for your system.
Selecting the input signal (D-SUB/DVI-D/DP)
► Press theINPUTbutton to open the Input selectsetting window.
► Press the
button (upwards arrow) or thebutton (downwards arrow) to
select the desired monitor connection (VGA, DVI or DP).
This setting window can also be called when the OSD menu is locked.
22 Fujitsu Technology Solutions
 
						

							Operation
Activate/deactivate ECO operating mode
The power consumption of the device can be decreased by reducing
the brightness of the picture.
► Press the
ECObutton to switch the ECO operating mode on or off.
The message ECO Mode ein orECO Mode off appears.
If the ECO operating mode is activated, the following OSD settings are changed:
Mode Office
Colour 6500K
Brightness reduced
After the ECO operating mode is switched off, the b rightness previously set by the user is restored.
Locking the OSD menu
The OSD menu can be locked to prevent accidental or unauthorised changes to the monitor settings.
►Press and hold the
MENUbutton for a few seconds while you switch on
the monitor with the ON/OFF switch.
The message OSD locked / unlocked
is displayed.
Please proceed in the same manner to release the locked OSD menu again.
Locking the ON/OFF button
The ON/OFF switch can be locked to prevent accidental or unauthorised
changes to the monitor settings.
►
Press and hold the
ECOandINPUTbuttons at the same time for a few seconds.
The message Power button locked / unlocked is displayed.
Proceed in the same way to release the locked ON/OFF switch again.
Fujitsu Technology Solutions 23
 
						

							Operation
Changing the monitor settings using the OSD menu
With the buttons on the control panel, you can call up and use the integrated
OSD (On-Screen Display) menu.
The English menu names are used in the following description (default setting).
►Press theMENUbutton to activate the OSD menu.
The main menu appears, with icons for the setting functions.
The first symbol, ( Brightness/Contrast ), is highlighted and the associated functions
are visible in the right-hand menu field.
► Press the
ECOorINPUTbutton to highlight another icon (e.g. Image adjust).
24 Fujitsu Technology Solutions
 
						

							Operation
►Press theMENUbutton to select the highlighted icon.
The Image adjust setup window will be displayed.
► Press the
ECOorINPUTbutton to highlight another function.
► Press the
orbutton to change a value or make a selection.
► Press the
MENUbutton to apply the changes and quit the function.
► Press the
AUTObutton to reject the changes and quit the function.
► Press the
AUTObutton to exit the OSD menu.
If you want to change other settings, select the corresponding function from the OSD
main menu. All possible adjustments of the main menu are described in the following.
OSD menu functions
The OSD me nu for analogue monitor operation is described below. During
digital operation some functions are not available, they are not needed because
of the di gital transmission technology being used.
Fujitsu Technology Solutions
25
 
						

							Operation
Adjusting the brightness and contrast
Call up theBrightness/Contrast setting window
Brightness
Set the brightness of the display
With this function you can change the brightness of the background lighting.
Contrast
Set the contrast of the display
With this function you can modify the contrast of pale colours.
Black levelSet the brightness of the display
With this function you modify the contrast of dark colours.
Auto levelAdjust the signal level
With this function you can automatically set the contrast.
Thefunctionisexecutedwiththe
button.
If the contrast is set too high, bright surfaces can no longer be distinguished from very
bright surfaces. If the contrast is set too low, the maximum brightness will not be achieved.
Adjusting the picture size and position
Call theImage ad just
setting window
Phase
Eliminate picture disturbance
With this function youfine-tune your monitor to eliminate picture disturbance.
Clock
Set synchronisation
With this fun ction you adjust the picture width to eliminate vertical picture
disturbance s.
H-Position
Adjust the horizontal position
With this f unction you move the picture to the left or to the right.
V-Position
Adjust the vertical position
With this function you move the picture up or down.
Expansion
Adjust the picture size
Full scr een
= selection of full screen mode
Keep as pect
= maximum picture size without distortion (only for PC image)
16:9 =16:9 widescreen format (Video/TV picture only)
4:3 =4:3 format (Video/TV picture only)
26
Fujitsu Technology Solutions