Fujitsu B19 6 Led Operating Manual

Operation
Adjusting the volume
Call theAudiosetting window
Vo l u m e
Set the volume for playback with the integrated loudspeakers
Mute
Switch the loudspeakers off or on
Setting the colour temperature and colours
Call theColoursetting window
Select the colour temperature
The warmth of the screen colours is set using the colour temperature. The
colour temperature is measured in Kelvin (K). You can choose between
sRGB,6500 K, 7500 K,9300 K,NativeandCustom Colour .
In the user-de fined setting you can change...

Operation
Setting functions in the Advanced menu
Call up theAdvancedsetting window
Input select
Selecting the input signal
This function allows you to switch the monitor from analogue to digital mode
and vice versa, when several signal sources are connected.
This requires that the graphic card used supports this function.
DDC-CI
Activation/deactivation of the DDC-CI
On= The DDC-CI function is enabled (standard setting)
Off = The DDC-CI function is disabled
Factory Recall
Activating the factory settings...

Notes on ergonomic colour adjustment
Notes on ergonomic colour adju
stment
If you select colours for the monitor in your application programmes,
take note of the information below.
The primary colours blue and red on a dark background do not produce the minimum
required contrast of 3:1 and are therefore not suitable for continuous text and data entry.
When using several colours for characters and b ackground and giving the primary colours full
modulation, you can obtain very suitable colour combinations...

Troubleshooting
Troubleshooting
Should an error occur,first check the following points. If the distortion is still not eliminated,
the monitor should, if possible, be checked on another computer.
If you cannot solve the problem, please contact our Service Desk.
Having this problem? Check the following points:
No screen display
Power indicator does not light up ►
Check whether the ON/OFF switch on the
monitor is switched on.
► Check whether the power c able on the
monitor is connected co rrectly.
► Check...

Troubleshooting
Having this problem?Check the following points:
Picture disturbances (vertical lines)►
Press theAUTObutton to conduct the
auto-adjustment of the screen.
Picture disturbances (horizo ntal lines, picture
noise) ►
Press theAUTObutton to conduct the
auto-adjustment of the screen.
The screen becomes darker The background lighting has a limited lifetime.
If your monitor display should become too dark,
the background lighting will have to be replaced.
►Contact our Service Desk.
Fujitsu...

Explanatory information about standard ISO 9241-307
Explanatory information abou
t
standard ISO 9241-307
Permanently unlit or lit pixels
Today’s production techniques cannot guarantee an absolutely fault-free screen display. Depending
on the total number of pixels (resolution), there may be a few constantly lit or unlit pixels or subpixels.
Pixel A pixel consists of 3 subpixels, normally red, green and blue. A pixel is
the smallest element that can be generated by complete functionality of
the display....

Technical specification
Technical speci fication
Condensation is not permitted, neither in the rated range of operation
nor in the limit range of operation.
B19-6 LED B22W-6 LED
Dimensions and weight
Visible diagonals 48.16 cm 55.9 cm
Dot pitch 0.098 mm 0.282 mm Width 376 mm 473.76 mm
Image size
Height 301 mm 296.1 mm
Maximum resolution 1280 x 1024 1680 x 1050 Width 410 mm 508 mm
Height 374 mm 369 mm
Dimensions incl. monitor
base
Depth 180 mm 180 mm
Weight (without packaging) approx. 5.0 ± 0.2 kg approx....

Technical specification
Ambient conditions B19-6 LEDB22W-6 LED
Environment class 3K2, DIN IEC 721
Rated range of operation
Humidity
Limit range of operation 5 °C .... 35 °C
15% .... 85 %
5 °C .... 35 °C5 °C .... 35 °C
15% .... 85 %
5 °C .... 35 °C
VESA-DDC-compatible VGA interface
Your monitor is equipped with a VESA-DDC-compatible VGA interface. VESA-DDC (Video
Electronics Standard Association, Display Data Channel) is used as the communications
interface between the monitor and the computer. If the...

Technical specification
SUB D port
6
10
11
15 51
Pin Meaning
1 Video input red
2 Video input green
3 Video input blue
4
Ground
5
Ground
6 Video ground red
7Video ground green
8 Video ground blue
9
+5 V (DDC)
10Sync. ground
11Ground
12
DDC Data
13 H. sync
14 V. sync
15DDC Clock
Fujitsu Technology Solutions 35
 

Technical specification
DVI-D port
91
17
Pin Meaning
1
TMDS Data2–
2TMDS Data2+
3
TMDS Data 2/4 Shield
4 not connected
5not connected
6DDC Clock
7
DDC Data
8Analog Vertica l Sync
9
TMDS Data1–
10TMDS Data1+
11
TMDS Data 1/ 3 Shield
12 not connec ted
13 not connected
14 +5V Power
15 Earth
16 Hot Plug Detect
17
TMDS Data0–
18TMDS Data0+
19
TMDSData 0/5 Shield
20 not connected
21 not connected
22
TMDS Clock Shield
23 TMDS Clock+
24TMDS Clock–
36 Fujitsu Technology Solutions