Fujifilm Camera X100s Owners Manual

97
Connections
Viewing Pictures on a Computer
 Connecting the Camera Connecting the Camera
 1  If the pictures you wish to copy are stored on a memory card, insert the card into the camera (P 12).
 
R Windows users may require the Windows CD when starting the software for the fi rst time.
 
Q Loss of power during transfer could result in loss of data or damage to internal memory or the memory 
card.  Charge the battery before connecting the camera.
 2 Turn the camera off  and connect the supplied USB...

98
Viewing Pictures on a Computer
 
Q If a memory card containing a large number of images is inserted, there may be a delay before the software 
starts and you may be unable to import or save images.  Use a memory card reader to transfer pictures.
 
Q Make sure that the computer does not display a message stating that copying is in progress and that the 
indicator lamp is out before turning the camera off   or disconnecting the USB cable (if the number of im-
ages copied is very large, the indicator...

99
Connections
Printing Pictures via USBPrinting Pictures via USB
If the printer supports PictBridge, the camera can be connected directly to the printer and 
pictures can be printed without fi  rst being copied to a computer.  Note that depending on the 
printer, not all the functions described below may be supported.
 Connecting the Camera Connecting the Camera
 1  Connect the supplied USB cable as shown and turn the printer on.
 2  Turn the camera on.  t  USB will be displayed 
in the monitor,...

100
Printing Pictures via USB
  Printing the Date of Recording  Printing the Date of Recording
To print the date of recording on pictures, press 
DISP/BACK in the PictBridge display and select PRINT 
WITH DATE 
s (to print pictures without the date of 
recording, select PRINT WITHOUT DATE).  To ensure 
that the date is correct, set the camera clock before 
taking pictures.  Some printers do not support date 
printing.  See the printer manual for details.
 Printing the DPOF Print Order Printing the DPOF...

101
Connections
Printing Pictures via USB
  During Printing During Printing
The message shown at right is 
displayed during printing.  Press 
DISP/BACK to cancel before all 
pictures are printed (depending 
on the printer, printing may end 
before the current picture has 
printed).
If printing is interrupted, turn the camera off    and 
then on again.
  Disconnecting the Camera  Disconnecting the Camera
Confi  rm that the above message is not displayed and 
turn the camera off .  Disconnect the USB...

102
Printing Pictures via USB
 
■ WITH DATE s/ WITHOUT  DATE
To modify the DPOF print order, select K  PRINT 
ORDER (DPOF) in the playback menu and press 
the command dial up or down to highlight  WITH 
DATE  s or WITHOUT DATE.
PLAYBACK MENU
RED EYE REMOVAL
SLIDE SHOW
PHOTOBOOK ASSIST
MARK FOR UPLOAD TO
IMAGE SEARCH
PRINT ORDER  (
DPOF )
DISP ASPECT
Y
WITH DATE sWITHOUT DATE
RESET ALL
WITH DATE s: Print date of recording 
on pictures.
WITHOUT DATE: Print pictures without 
date.
Press MENU/OK and follow...

103
Connections
Printing Pictures via USB
 4 The total number of prints is dis-played in the monitor.  Press MENU/
OK to exit.
The pictures in the current 
print order are indicated by a 
u icon during playback.
 
■ RESET ALL
To cancel the current print 
order, select RESET ALL for 
K  PRINT ORDER (DPOF) .  The 
confi rmation shown at right 
will be displayed; press  MENU/OK 
to remove all pictures from the 
order.
 
R Print orders can contain a maximum of 999 pictures.
 
R If a memory card is inserted...

104
 Viewing Pictures on TV Viewing Pictures on TV
To show pictures to a group, connect the camera to a TV using an HDMI cable (available separately 
from third-party suppliers; note that the TV can only be used for playback, not shooting).
 1  Turn the camera off .
 2  Connect the cable as shown below.
Insert into 
HDMI mini connector Insert into 
HDMI connector
 
R Be sure the connectors are fully inserted.
 3 Tune the television to the HDMI input channel.  See the documentation supplied with the...

105
Technical Notes
Technical NotesTechnical Notes
 Optional Accessories Optional  Accessories
The camera supports a wide range of accessories from FUJIFILM and other manufacturers.
 Accessories from FUJIFILM Accessories from FUJIFILM
The following optional accessories are available from FUJIFILM.  For the latest information on the accesso-
ries available in your region, check with your local FUJIFILM representative or visit http://www.fujifilm.com/
products/digital_cameras/index.html.
Rechargeable...

106
Optional Accessories
Leather casesLeather casesLC-X100S: This leather case, exclusively for use with the X100S/X100, combines practicality with the luxury of leather and comes 
with a shoulder strap made of the same material.  Pictures can be taken and batteries and memory cards inserted or removed 
with the camera still in its case.
Adapter ringsAdapter ringsAR-X100: An aluminum adapter ring exclusively for use with the X100S/X100. It is used when attaching the 
LH-X100 lens hood or φ49 mm fi lters...