Fujifilm Camera X M1 Owners Manual
Have a look at the manual Fujifilm Camera X M1 Owners Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 17 Fujifilm manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
15 First Steps Inserting the Battery and a Memory Card Removing the Battery and Memory Card Removing the Battery and Memory Card Before removing the battery or memory card, turn the camera off and open the battery-chamber cover. To remove the battery, press the battery latch to the side, and slide the battery out of the camera as shown. Battery latch To remove the memory card, press it in and release it slowly. The card can then be removed by hand. When a memory card is removed, the card could be ejected too quickly. Use your fi nger to hold it and gently release the card. QQBatteriesBatteries • Remove dirt from the battery terminals with a clean, dry cloth. Failure to observe this precaution could prevent the battery from charging. • Do not affi x stickers or other objects to the battery. Failure to observe this precaution could make it im- possible to remove the battery from the camera. • Do not short the battery terminals. The battery could overheat. • Read the cautions in “ The Battery and Power Supply” ( P iv). • Use only battery chargers designated for use with the battery. Failure to observe this precaution could re- sult in product malfunction. • Do not remove the labels from the battery or attempt to split or peel the outer casing. • The battery gradually loses its charge when not in use. Charge the battery one or two days before use.
16 Inserting the Battery and a Memory Card ■ Compatible Memory Cards FUJIFILM and SanDisk SD, SDHC, and SDXC memory cards have been approved for use in the cam- era. A complete list of approved memory cards is available at http://www.fujifilm.com/support/digital_ cameras/compatibility/. Operation is not guaranteed with other cards. The camera can not be used with xD-Picture Cards or MultiMediaCard (MMC) devices. QQMemory CardsMemory Cards • Do not turn the camera off or remove the memory card while the memory card is being formatted or data are being recorded to or deleted from the card. Failure to observe this precaution could damage the card. • Format memory cards before fi rst use, and be sure to reformat all memory cards after using them in a computer or other device. For more information on formatting memory cards, see page 87. • Memory cards are small and can be swallowed; keep out of reach of children. If a child swallows a memory card, seek medical assistance immediately. • miniSD or microSD adapters that are larger or smaller than the standard dimensions of an SD/SDHC/SDXC card may not eject normally; if the card does not eject, take the camera to an authorized service representative. Do not forcibly remove the card. • Do not affi x labels to memory cards. Peeling labels can cause camera malfunction. • Movie recording may be interrupted with some types of SD/SDHC/SDXC memory card. Use a H card or better when shooting HD movies. • Formatting a memory card in the camera creates a folder in which pictures are stored. Do not rename or delete this folder or use a computer or other device to edit, delete, or rename image fi les. Always use the camera to delete pictures; before editing or renaming fi les, copy them to a computer and edit or rename the copies, not the originals. Renaming the fi les on the camera can cause problems during playback.
17 First Steps Turning the Camera on and Off Turning the Camera on and Off Rotate the ON/OFF switch to ON to turn the camera on. Select OFF to turn the camera off . R Press the a button to start playback. Press the shutter button halfway to return to shooting mode. R The camera will turn off automatically if no operations are performed for the length of time selected for Z POWER MANAGEMENT > AUTO POWER OFF (P 85). To reactivate the camera after it has turned off automatically, press the shutter button halfway or turn the ON/OFF switch to OFF and then back to ON. R For information on startup options, see page 85. Q Fingerprints and other marks on the lens can aff ect pictures and the view through the lens in the camera display. Keep the lens clean. Battery Level Battery Level After turning the camera on, check the battery level in the display. IndicatorIndicatorDescriptionDescription D (white) Battery partially discharged. C (white) Battery more than half discharged. B (red) Low battery. Charge as soon as possible. A (blinks red) Battery exhausted. Turn camera off and recharge battery. P
18 Basic Setup Basic Setup A language-selection dialog is displayed the fi rst time the camera is turned on. Set up the camera as described below (you can reset the clock or change languages at any time using the F DATE/ TIME or Q a options in the setup menu; for information on displaying the setup menu, see page 83). 1 Choose a language. START MENU NOSET ENGLISH FRANCAIS DEUTSCH Highlight a language and press MENU/OK. R Press DISP/BACK to skip the current step. Any steps you skip will be dis- played the next time the camera is turned on. 2 Set the date and time. NOSET YY. MM. DD DATE/TIME NOT SET 1. 1201312 : 00AM2012 2011 2015 2014 Press the selector left or right to highlight the year, month, day, hour, or minute and press up or down to change. To change the order in which the year, month, and day are displayed, highlight the date for- mat and press the selector up or down. Press MENU/OK to exit to shoot- ing mode when settings are complete. R If the battery is removed for an extended period, the camera clock will be reset and the language-selection dialog will be displayed when the camera is turned on.
19 First Steps The The DISP/BACKDISP/BACK Button Button Press DISP/BACK to cycle through display modes as follows: ■ Shooting M200F5.61000 2 1 0 -1 -22 1 0 -1 -2 F100 MF5.61000200 2 1 0 -1 -2 INFORMATION 1 INFORMATION 2 F100 MF5.61000200 2 1 0 -1 -2 CUSTOM INFORMATION OFF R INFORMATION 2 is available only when an option other than x TRACKING is selected for F FOCUS MODE in modes P, S, A, and M. Custom Display Custom Display Choose items for display using the v DISP. CUS- TOM SETTING option in the shooting menu (P 72): Framing grid Flash mode Focus distance (autofocus) White balance Focus distance (manual focus) Film simulation Histogram Dynamic range Exposure (shutter speed, aperture, and sensitivity) Number of exposures remaining/ media Exposure compensation/exposure indicator Image quality and size Metering Battery level R To view the selected items, press DISP/BACK to cy- cle through display modes until CUSTOM indica- tors are displayed. R See pages 6 – 7 for the locations of these items in the displays.
20 The DISP/BACK Button ■ Playback Indicators displayed Indicators hidden FavoritesPhoto information 12 / 31 / 2050 10 : 00 AM 3:2 F 100-0001 1 / 10001 / 1000F5 . 6F5 . 6+1/3+1/3200200200200 100-0001 3 12 / 31 / 205012 / 31 / 205010 : 00 AM10 : 00 AM 3:2 FISO 200 1/1000 12 / 31 / 2050 OFF: : : F4.5 10:00 AM 100-0001 -12/3: Histograms Histograms Histograms show the distribution of tones in the im- age. Brightness is shown by the horizontal axis, the number of pixels by the vertical axis. Shadows Highlights No. of pixels Pixel brightness Optimal exposure: Pixels are distrib- uted in an even curve through- out the tone range. Overexposed: Pixels are clustered on the right side of the graph. Underexposed: Pixels are clustered on the left side of the graph. Detailed Information Detailed Information qq Dynamic range Dynamic rangeww Image size and quality Image size and qualityee Sensitivity Sensitivity : : : :OFF ISO 4001/250F4.5 2 3-112 / 31 / 2050 10 : 00 AM 100-00014:3Nrr Shutter speed/aperture Shutter speed/aperturett Film simulation Film simulationyy Flash mode Flash mode uu White balance White balanceii Exposure compensation Exposure compensation oo Frame number Frame number!0!0 Picture (overexposed areas blink on and off ) Picture (overexposed areas blink on and off ) !1!1 Histogram Histogram
21 Basic Photography and Playback Basic Photography and PlaybackBasic Photography and Playback Taking PhotographsTaking Photographs This section explains basic photography. 1 Select S mode. Rotate the mode dial to S (ADVANCED SR AUTO). The following information will be dis- played in the LCD monitor. Scene Icon Scene Icon The camera automatically selects the appropriate scene. The The oo Icon Icon In S mode, the camera continuously adjusts fo- cus and searches for faces, increasing the drain on the battery; in addition, the sound of the camera focusing may be audible. o is displayed in the LCD monitor. R The Q button can be used to view and adjust camera settings (P 32).
22 Taking Photographs 2 Ready the camera.Hold the camera steady with both hands and brace your elbows against your sides. Shaking or unsteady hands can blur your shots. To prevent pictures that are out of focus or too dark (underexposed), keep your fi ngers and other objects away from the lens, fl ash, and AF-assist illuminator. 3 Frame the picture. Use the zoom ring to frame the picture in the display. Zoom ring 4 Focus.Frame the picture with your sub- ject in the center of the display and press the shutter button halfway to focus. R If the subject is poorly lit, the AF-assist illumina- tor may light ( P 75). If the camera is able to focus, it will beep twice and focus area will glow green. Focus and exposure will lock while the shutter button is pressed halfway. If the camera is unable to focus, the focus frame will turn red, and s will be displayed. If the subject is close to the camera (the actual dis- tance varies with the lens; for more informa- tion, see the lens manual), select macro mode and try again (P 29). 5 Shoot. Smoothly press the shutter button the rest of the way down to take the picture.
23 Basic Photography and Playback Viewing Pictures Viewing Pictures Viewing Pictures Full FrameViewing Pictures Full Frame Pictures can be viewed in the LCD monitor. When taking important pictures, take a test shot and check the results. To view pictures full frame, press a. 100-0001100-0001 1 / 10001 / 1000 FF4.4 .5F4 . 52233 Additional pictures can be viewed by pressing the selector left or right or ro- tating the main command dial. Press the selector or rotate the dial right to view pic- tures in the order recorded, left to view pictures in reverse order. Keep the selector pressed to scroll rapidly to the desired frame. R Pictures taken using other cameras are indicated by a m (“gift image”) icon during playback. Favorites: Rating Pictures Favorites: Rating Pictures To rate the current picture, press DISP/BACK and press the selector up and down to select from zero to fi ve stars. Zooming in on the Focus Point Zooming in on the Focus Point Press the center of the sub-com- mand dial to zoom in on the focus point. Press the center of the sub- command dial again to return to full-frame playback.
24 Viewing Pictures Playback Zoom Playback Zoom Rotate the sub-command dial to zoom in or out on pictures in full-frame playback. 100-0001100-0001 R To display multiple images, ro- tate the sub-command dial left when a picture is displayed full frame. Zoom indicator When the picture is zoomed in, the selector can be used to view areas of the image not currently visible in the display. To exit zoom, press DISP/BACK, MENU/OK, or the center of the sub-command dial. Navigation window shows portion of image currently displayed R The maximum zoom ratio varies with image size (P 70). Playback zoom is not available with cropped or resized copies saved at a size of a.