Fujifilm Camera Finepix S8400w Owners Manual

							Owner’s Manual
Thank you for your purchase of this prod-
uct. This manual describes how to use your 
FUJIFILM digital camera and the supplied 
software. Be sure that you have read and 
understood its contents and the warnings 
in “For Your Safety” (P ii) before using the 
camera.
For information on related products, visit our website at 
http://www.fujifilm.com/products/digital_cameras/index.html
Before You Begin
First Steps
Basic Photography and Playback More on PhotographyMore on Playback
Wireless Networks Movies
Connections Menus
Technical Notes
Troubleshooting/Appendix
BL03601-100EN 
						

							ii
• Read Instructions: All the safety and 
operating instructions should be 
read before the appliance is oper-
ated.
•  Retain Instructions: The safety and 
operating instructions should be 
retained for future reference.
•  Heed Warnings: All warnings on the 
appliance and in the operating in-
structions should be adhered to.
•  Follow Instructions: All operating 
and use instructions should be fol-
lowed.
InstallationInstallationPower Sources:  This video product 
should be operated only from the 
type of power source indicated on 
the marking label. If you are not sure 
of the type of power supply to your 
home, consult your appliance dealer 
or local power company. For video 
products intended to operate from 
battery power, or other sources, refer 
to the operating instructions.
Grounding or Polarization:  This video 
product is equipped with a polar-
ized alternating-current line plug (a 
plug having one blade wider than 
the other). This plug will fit into the 
power outlet only one way. This is a 
safety feature. If you are unable to in-
sert the plug fully into the outlet, try 
reversing the plug. If the plug should 
still fail to fit, contact your electrician 
to replace your obsolete outlet. Do  not defeat the safety purpose of the 
polarized plug.
Alternate Warnings:
 This video 
product is equipped with a 3-wire 
grounding-type plug, a plug having 
a third (grounding) pin. This plug will 
only fit into a grounding-type power 
outlet. This is a safety feature. If you 
are unable to insert the plug into 
the outlet, contact your electrician 
to replace your obsolete outlet. Do 
not defeat the safety purpose of the 
grounding-type plug.
Overloading:  Do not overload wall 
outlets and extension cords as this 
can result in a risk of fire or electric 
shock.
Ventilation:  Slots and openings in the 
cabinet are provided for ventilation 
and to ensure reliable operation of 
the video product and to protect it 
from overheating, and these open-
ings must not be blocked or cov-
ered.
The openings should never be 
blocked by placing the video prod-
uct on a bed, sofa, rug, or other simi-
lar surface.
This video product should not be 
placed in a built-in installation such 
as a bookcase or rack unless proper 
ventilation is provided or the manu-
facturer’s instructions have been 
adhered to. This video product should never be 
placed near or over a radiator or heat 
register.
Attachments:
 Do not use attach-
ments not recommended by the 
video product manufacturer as they 
may cause hazards.
Water and Moisture:  Do not use this 
video product near water – for ex-
ample, near a bath tub, wash bowl, 
kitchen sink, or laundry tub, in a wet 
basement, or near a swimming pool, 
and the like.
Power-Cord Protection:  Power-Supply 
cords should be routed so that 
they are not likely to be walked on 
or pinched by items placed upon 
or against them, paying particular 
attention to cords at plugs, conve-
nience receptacles, and the point 
where they exit from the appliance.
Accessories:  Do not place this video 
product on an unstable cart, stand, 
tripod, bracket, or table. The video 
product may fall, causing serious 
injury to a child or adult, and serious 
damage to the appliance. Use only 
with a cart, stand, tripod, bracket, or 
table recommended by the manu-
facturer, or sold with the video prod-
uct. Any mounting of the appliance 
should follow the manufacturer’s in-
structions, and should use a mount-
ing accessory recommended by the 
manufacturer.
An appliance 
and cart com-
bination should 
be moved with 
care. Quick stops, 
excessive force, 
and uneven sur-
faces may cause the appliance and 
cart combination to overturn.
AntennasAntennasOutdoor Antenna Grounding: If an 
outside antenna or cable system is 
connected to the video product, be 
sure the antenna or cable system is 
grounded so as to provide some pro-
tection against voltage surges and 
built-up static charges. Section 810 
of the National Electrical Code, ANSI/
NFPA No. 70, provides information 
with respect to proper grounding 
of the mast and supporting struc-
ture, grounding of the lead-in wire 
to an antenna-discharge unit, size of 
grounding conductors, location of 
antenna-discharge unit, connection 
to grounding electrodes, and require-
ments for the grounding electrode.
IMPORTANT SAFETY INSTRUCTIONS
 For Your Safety 
						

							iii
For Your Safety
Power Lines: An outside antenna sys-
tem should not be located in the 
vicinity of overhead power lines or 
other electric light or power circuits, 
or where it can fall into such power 
lines or circuits. When installing an 
outside antenna system, extreme 
care should be taken to keep from 
touching such power lines or circuits 
as contact with them might be fatal.
EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE
Antenna 
Lead in Wire
Ground Clamp
Power Service 
Grounding Electrode 
System (NEC ART 250.  PART H)
Electric Service 
Equipment
Ground  ClampsAntenna 
Discharge Unit 
(NEC SECTION 
810 -20)
Grounding 
Conductors 
(NEC SECTION 
810 -21)
UseUseCleaning:  Unplug this video product 
from the wall outlet before clean-
ing. Do not use liquid cleaners or 
aerosol cleaners. Use a damp cloth 
for cleaning.
Object and Liquid Entry:  Never push 
objects of any kind into this video 
product through openings as they 
may touch dangerous voltage 
points or short out parts that could 
re su l t in a f ire o r e l e c t r i c sh o ck . N e ve r 
spill liquid of any kind on the video 
product.
Lightning:  For added protection for 
this video product receiver during 
a lightning storm, or when it is left 
unattended and unused for long pe-
riods of time, unplug it from the wall 
outlet and disconnect the antenna 
or cable system. This will prevent 
damage to the video product due 
to lightning and power-line surges.ServiceServiceServicing:  Do not attempt to service 
this video product yourself as open-
ing or removing covers may expose 
you to dangerous voltage or other 
hazards. Refer all servicing to quali-
fied service personnel.
Damage Requiring Service:  Unplug this 
video product from the wall outlet 
and refer servicing to qualified ser-
vice personnel under the following 
conditions:
When the power-supply cord or 
plug is damaged.
If liquid has been spilled, or objects 
have fallen into the video product.
If the video product has been ex-
posed to rain or water.
If the video product has been 
dropped or the cabinet has been 
damaged.
If the video product does not op-
erate normally be following the 
operating instructions. Adjust only 
those controls that are covered by 
the operating instructions as an im-
proper adjustment of other controls 
may result in damage and will often 
require extensive work by a qualified 
technician to restore the video prod-
uct to its normal operation.
When the video product exhibits a 
distinct change in performance - this 
indicates a need for service. Replacement Parts:
 When replace-
ment parts are required, be sure 
the service technician has used 
replacement parts specified by the 
manufacturer or have the same 
characteristics as the original part. 
Unauthorized substitutions may 
result in fire, electric shock or other 
hazards.
Safety Check:  Upon completion of any 
service or repairs to this video prod-
uct, ask the service technician to 
perform safety checks to determine 
that the video product is in proper 
operating condition. 
						

							iv
For Your Safety
Be sure to read this notes before using
Safety Notes
•  Make sure that you use your camera correctly. Read these Safety Notes and your  Owner’s Manual  carefully before use.
•  After reading these Safety Notes, store them in a safe place.
About the Icons
The icons shown below are used in this document to indicate the severity of 
the injury or damage that can result if the information indicated by the icon 
is ignored and the product is used incorrectly as a result.
WARNING This icon indicates that death or serious injury can result if the infor-
mation is ignored.
CAUTIONThis icon indicates that personal injury or material damage can result 
if the information is ignored.The icons shown below are used to indicate the nature of the information 
which is to be observed.
Triangular icons tell you that this information requires attention (“im-
portant”).
Circular icons with a diagonal bar tell you that the action indicated is 
prohibited (“Prohibited”).
Filled circles with an exclamation mark tell you an ac tion that must be 
performed (“Required”).
 WARNING WARNING
Unplug 
from power  socket.
If a problem arises, turn the camera off, remove the battery, disconnect and 
unplug the AC power adapter.
Continued use of the camera when it is emitting smoke, is emitting 
any unusual odor, or is in any other abnormal state can cause a fire 
or electric shock.
• Contact your FUJIFILM dealer.
 WARNING WARNINGDo not allow water or foreign objects to enter the camera.
If water or foreign objects get inside the camera, turn the camera 
of f, remove the battery and disconnect and unplug the AC power 
adapter.
Continued use of the camera can cause a fire or electric shock.
• Contact your FUJIFILM dealer.
Do not use in 
the bathroom  or shower.Do not use the camera in the bathroom or shower.
This can cause a fire or electric shock.
Do not disas- sembleNever attempt to disassemble or modify (never open the case).
Failure to observe this precaution can cause fire or electric shock.
Do not touch internal parts
Should the case break open as the result of a fall or other accident, do not touch 
the exposed parts.
Failure to observe this precaution could result in electric shock or in 
injury from touching the damaged parts. Remove the battery im-
mediately, taking care to avoid injury or electric shock, and take the 
product to the point of purchase for consultation.
Do not change, heat or unduly twist or pull the connection cord and do not 
place heavy objects on the connection cord.
These actions could damage the cord and cause a fire or electric 
shock.
• If the cord is damaged, contact your FUJIFILM dealer.
Do not place the camera on an unstable surface.
This can cause the camera to fall or tip over and cause injury.
Never attempt to take pictures while in motion.
Do not use the camera while you are walking or driving a vehicle.  This 
can result in you falling down or being involved in a traf fic accident.
Do not touch any metal parts of the camera during a thunderstorm.
This can cause an electric shock due to induced current from the 
lightning discharge.
Do not use the battery except as specified.
Load the battery as aligned with the indicator. 
						

							v
For Your Safety
 WARNING WARNINGDo not heat, change or take apart the battery.  Do not drop or subject the bat-
tery to impacts.  Do not store the battery with metallic products.  Do not use 
chargers other than the specified model to charge the battery.
Any of these actions can cause the battery to burst or leak and cause 
fire or injury as a result.
Use only the battery or AC power adapters specified for use with this camera.  
Do not use voltages other than the power supply voltage shown.
The use of other power sources can cause a fire.
If the battery leaks and fluid gets in contact with your eyes, skin or clothing.  
Flush the affected area with clean water and seek medical attention or call an 
emergency number right away.
Do not use the charger to charge batteries other than those specified here.
The Ni-MH battery charger is designed for FUJIFILM HR-AA Ni-MH 
batteries. Using the charger to charge conventional batteries or other 
types of rechargeable batteries can cause the battery to leak fluid, 
overheat or burst.
Danger of explosion if battery is incorrectly replaced. Replace only with the 
same or equivalent type.
Do not use in the presence of flammable objects, explosive gases, or dust.
When carrying the battery, install it in a digital camera or keep it in the hard 
case.  When storing the battery, keep it in the hard case.  When discarding, 
cover the battery terminals with insulation tape.
Contact with other metallic objects or battery could cause the bat-
tery to ignite or burst.
Keep Memory Cards out of the reach of small children.
Because Memory Cards are small, they can be swallowed by children. 
Be sure to store Memory Cards out of the reach of small children. If 
a child swallows a Memory Card, seek medical attention or call an 
emergency number.
 CAUTION CAUTIONDo not use this camera in locations affected by oil fumes, steam, humidity or 
dust.
This can cause a fire or electric shock.
 CAUTION CAUTIONDo not leave this camera in places subject to extremely high temperatures.
Do not leave the camera in locations such as a sealed vehicle or in 
direct sunlight.  This can cause a fire.
Keep out of the reach of small children.
This product could cause injury in the hands of a child.
Do not place heavy objects on the camera.
This can cause the heav y object to tip over or fall and cause injury.
Do not move the camera while the AC power adapter is still connected.  Do not 
pull on the connection cord to disconnect the AC power adapter.
This can damage the power cord or cables and cause a fire or electric 
shock.
Do not use the AC power adapter when the plug is damaged or the plug socket 
connection is loose.
This could cause a fire or electric shock.
Do not cover or wrap the camera or the AC power adapter in a cloth or blanket.
This can cause heat to build up and distort the casing or cause a fire.
When you are cleaning the camera or you do not plan to use the camera for 
an extended period, remove the battery and disconnect and unplug the AC 
power adapter.
Failure to do so can cause a fire or electric shock.
When charging ends, unplug the charger from the power socket.
Leaving the charger plugged into the power socket can cause a fire.
Using a flash too close to a person’s eyes may temporarily affect the eyesight.
Take particular care when photographing infants and young children.
When a memory card is removed, the card could come out of the slot too quick-
ly. Use your finger to hold it and gently release the card.
Request regular internal testing and cleaning for your camera.
Build-up of dust in your camera can cause a fire or electric shock.
• Contact your FUJIFILM dealer to request internal cleaning every 2 years.
• Please note this is not a free of charge service.
Remove your fingers from the flash window before the flash fires.
Failure to observe this precaution could result in burns.
Keep the flash window clean and do not use the flash if the window is obstructed.Failure to observe these precautions could cause smoke or discoloration. 
						

							vi
For Your Safety
 Power Supply and Battery*  Confirm your battery type before read-ing the following descriptions.
The following explains proper use of 
batteries and how to prolong their 
life. Incorrect use of batteries can 
cause shorter battery life, as well as 
leakage, excessive heat, fire or explo-
sion.
1   Camera uses the Rechargeable 
Lithium-ion Battery
* When shipped, the battery is not  fully charged. Always charge the 
battery before using it.
* When carrying the battery, install it  in a digital camera or keep it in the 
soft case.
■ Battery Features
• The battery gradually loses its  charge even when not used. Use 
a battery that has been charged 
recently (in the last day or two) to 
take pictures.
•  To maximize the life of the battery,  turn the camera of f as quickly as 
possible when it is not being used.
• The number of available frames  will be lower in cold locations or 
at low temperatures. Take along 
a spare fully charged battery. You 
can also increase the amount of 
power produced by putting the 
battery in your pocket or another 
warm place to heat it and then 
loading it into the camera just be-
fore you take a picture.   If you are using a heating pad, take 
care not to place the battery di-
rectly against the pad. The camera 
may not operate if you use a de-
pleted battery in cold conditions.
■  Charging the Battery
• You can charge the battery using  the battery charger (included).
- The battery can be charged  at ambient temperatures be-
tween 0°C and +40°C (+32°F 
and +104°F). Refer to the  Owner’s 
Manual  for the time of charging 
battery.
- You should charge the battery  at an ambient temperature be-
tween +10°C and +35°C (+50°F 
and +95°F). If you charge the 
battery at a temperature outside 
this range, charging takes longer 
because the performance of the 
battery is impaired.
- You cannot charge the battery  at temperatures of 0°C (+32°F) or 
below.
•  The Rechargeable Lithium-ion Bat- tery does not need to be fully dis-
charged or exhausted flat before 
being charged.
•  The battery may feel warm af ter it  has been charged or immediately 
after being used. This is perfectly 
normal.
• Do not recharge a fully charged  battery. ■ Battery Life
At normal temperatures, the bat-
tery can be used at least 300 times. 
If the time for which the battery 
provides power shortens markedly, 
this indicates that the battery has 
reached the end of its ef fective life 
and should be replaced.
■  Notes on storage
• If a battery is stored for long 
periods while charged, the per-
formance of the battery can be 
impaired. If the battery will not be 
used for some time, run the battery 
out before storing it.
• If you do not intend to use the  camera for a long period of time, 
remove the battery from the cam-
era.
•  Store the battery in a cool place. - The battery should be stored in a dry location with an ambient 
temperature between +15°C and 
+25°C (+59°F and +77°F).
-  Do not leave the battery in hot or  extremely cold places.
■  Handling the Battery  Cautions for Your Safety:
•  Do not carry or store battery with  metal objects such as necklaces or 
hairpins.
•  Do not heat the battery or throw it  into a fire.
• Do not attempt to take apart or  change the battery.
• Do not recharge the battery with  chargers other those specified. •  Dispose of used battery promptly.
•  Do not drop the battery or other-
wise subject it to strong impacts.
•  Do not expose the battery to wa- ter.
•  Always keep the battery terminals  clean.
•  Do not store batteries in hot plac- es. Also, if you use the battery for 
a long period, the camera body 
and the battery itself will become 
warm. This is normal. Use the AC 
power adapter if you are taking 
pictures or viewing images for a 
long period of time.
2   Camera uses AA Alkaline, 
Rechargeable Ni-MH (nickel-metal 
hydride) or AA lithium batteries
* For details on the batteries that  you can use, refer to the  Owner’s 
Manual  of your camera.
■  Cautions for Using Battery
•  Do not heat the batteries or throw  them into a fire.
•  Do not carry or store batteries with  metal objects such as necklaces or 
hairpins.
• Do not expose the batteries to  water, and keep batteries from get-
ting wet or stored in moist loca-
tions.
• Do not attempt to take apart or  change the batteries, including 
battery casings.
• Do not subject the batteries to  strong impacts. 
						

							vii
For Your Safety
•  Do not use batteries that are leak-ing, deformed, discolored.
•  Do not store batteries in warm or  humid places.
•  Keep the batteries out of reach of  babies and small children.
•  Make sure that the battery polarity  (C and D ) is correct.
•  Do not use new with used batter- ies. Do not use charged and dis-
charged batteries together.
• Do not use dif ferent types or  brands of batteries at the same 
time.
• If you do not intend to use the  camera for a long period of time, 
remove the batteries from the 
camera. Note if the camera is left 
with the batteries removed, the 
time and date settings are cleared.
•  The batteries feel warm right af ter  being used. Before removing the 
batteries, turn the camera of f and 
wait for the batteries to cool down.
•  Since batteries do not work well in  cold weather or locations, warm 
the batteries by placing them in-
side your garments before use. 
Batteries do not work well when 
cold. They will work again when 
the temperature returns to normal.
• Soil (such as fingerprints) on the  battery terminals makes the bat-
teries charge less reducing the 
number of images. Carefully wipe 
the battery terminals with a sof t 
dry cloth before loading.If any liquid at all leaks from 
the batteries, wipe the battery 
compartment thoroughly and 
then load new batteries.
If any battery fluid comes into 
contact with your hands or 
clothing, flush the area thor-
oughly with water. Note that 
battery fluid can cause loss 
of eyesight if it gets into your 
eyes. If this occurs, do not rub 
your eyes. Flush the fluid out 
with clean water and contact 
your physician for treatment.
■  Using the AA-size Ni-MH batteries  correctly
• Ni-MH batteries left unused in  storage for long periods can be-
come “deactivated”. Also, repeat-
edly charging Ni-MH batteries 
that are only partially discharged 
can cause them to suf fer from the 
“memory ef fect”. Ni-MH batteries 
that are “deactivated” or affected 
by “memory” suffer from the prob-
lem of only providing power for a 
short time af ter being charged. To 
prevent this problem, discharge 
and recharge them several times 
using the camera’s “Discharging 
rechargeable batteries” function.
  Deactivation and memory are spe- cific to Ni-MH batteries and are not 
in fact battery faults.
 See  Owner’s Manual  for the proce-
dure for “Discharging rechargeable 
batteries”.
 CAUTION CAUTIONDo not use the “Discharging re-
chargeable batteries” function when 
alkaline batteries being used.
•  To charge Ni-MH batteries, use the  quick battery charger (sold sepa-
rately). Refer to the instructions 
supplied with the charger to make 
sure that the charger is used cor-
rectly.
•  Do not use the battery charger to  charge other batteries.
• Note that the batteries feel warm  af ter being charged.
•  Due to the way the camera is con- structed, a small amount of current 
is used even when the camera is 
turned off. Note in particular that 
leaving Ni-MH batteries in the 
camera for a long period will over-
discharge the batteries and may 
render them unusable even after 
recharging.
•  Ni-MH batteries will self-discharge  even when not used, and the time 
for which they can be used may be 
shortened as a result.
• Ni-MH batteries will deteriorate  rapidly if over-discharged (e.g. 
by discharging the batteries in a 
flashlight). Use the “Discharging re-
chargeable batteries” function pro-
vided in the camera to discharge 
the batteries. • Ni-MH batteries have a limited 
service life. If a battery can only 
be used for a short time even after 
repeated discharge-charge cycles, 
it may have reached the end of its 
service life.
■  Disposing of Batteries
• When disposing of batteries, do  so in accordance with your local 
waste disposal regulations.
3   Notes on both models (1, 2)
■  AC Power Adapter
Always use the AC Power Adapter 
with the camera. The use of an AC 
Power adapter other than FUJIFILM 
AC Power Adapter can be damaged 
to your digital camera.
For details on the AC power adapter, 
refer to the  Owner’s Manual  of your 
camera.
• Use the AC power adapter for in- door use only.
•  Plug the connection cord plug se- curely into the DC input terminal.
•  Turn of f the FUJIFILM Digital cam- era before disconnecting the cord 
from the DC input terminal. To dis-
connect, pull out the plug gently. 
Do not pull on the cord.
•  Do not use the AC power adapter  with any device other than your 
camera.
•  During use, the AC power adapter  will become hot to the touch. This 
is normal. 
						

							viii
For Your Safety
• Do not take apart the AC power adapter. Doing so could be dan-
gerous.
•  Do not use the AC power adapter  in a hot and humid place.
• Do not subject the AC power  adapter to strong shocks.
•  The AC power adapter may emit a  humming. This is normal.
•  If used near a radio, the AC power  adapter may cause static. If this 
happens, move the camera away 
from the radio.
Before Using the CameraDo not aim the camera at extremely 
bright light sources, such as the sun 
in a cloudless sky.  Failure to observe 
this precaution could damage the 
camera image sensor.
■  Test Shots Prior to Photography
For important photographs (such as 
weddings and overseas trips), always 
take a test shot and view the im-
age to make sure that the camera is 
working normally.
• FUJIFILM Corporation cannot ac-cept liability for any incidental 
losses (such as the costs of photog-
raphy or the loss of income from 
photography) incurred as a result 
of faults with this product.
■  Notes on Copyright
Images recorded using your digital 
camera system cannot be used in 
ways that infringe copyright laws 
without the consent of the owner,  unless intended only for personal 
use. Note that some restrictions ap-
ply to the photographing of stage 
performances, entertainments and 
exhibits, even when intended purely 
for personal use. Users are also asked 
to note that the transfer of Memory 
Card containing images or data pro-
tected under copyright laws is only 
permissible within the restrictions 
imposed by those copyright laws.
■  Handling Your Digital Camera
To ensure that images are recorded 
correctly, do not subject the camera 
to impact or shock while an image is 
being recorded.
■ Liquid Crystal
If the LCD monitor is damaged, take 
particular care with the liquid crystal 
in the monitor. If any of the follow-
ing situations arise, take the urgent 
action indicated.
• If liquid crystal comes in contact 
with your skin:
  Wipe the area with a cloth and  then wash thoroughly with soap 
and running water.
•  If liquid crystal gets into your eye:
  Flush the af fected eye with clean  water for at least 15 minutes and 
then seek medical assistance.
•  If liquid crystal is swallowed:
  Flush your mouth thoroughly with  water. Drink large quantities of wa-
ter and induce vomiting. Then seek 
medical assistance. Although the LCD panel is produced 
with highly sophisticated technolo-
gies, there may be black spots or 
permanently lit spots.  This is not a 
malfunction, and does not affect re-
corded images.
■ Trademark Information
xD-Picture Card
 and E are trade-
marks of FUJIFILM Corporation.  The 
typefaces included herein are solely 
developed by DynaComware Tai-
wan Inc.  Macintosh, QuickTime, and 
Mac OS are trademarks of Apple Inc. 
in the U.S.A. and other countries.  
Windows 8, Windows  7, Windows 
Vista, and the Windows logo are 
trademarks of the Microsoft group 
of companies.  
Wi-Fi® and Wi-Fi Pro-
tected Setup® are registered trade-
marks of the Wi-Fi Alliance.  
Adobe 
and Adobe Reader are either trade-
marks or registered trademarks of 
Adobe Systems Incorporated in the 
U.S.A. and/or other countries.  The 
SDHC and SDXC logos are trade-
marks of SD-3C, LLC. The HDMI 
logo is a trademark.  YouTube is a 
trademark of Google Inc.  Facebook 
is a trademark of Facebook, Inc.  All 
other trade names mentioned in this 
manual are the trademarks or regis-
tered trademarks of their respective 
owners.
■  Notes on Electrical Interference
If the camera is to be used in hos-
pitals or aircrafts, please note that 
this camera may cause interference 
to other equipment in the hospital 
or aircraft. For details, please check 
with the applicable regulations.
■ 
Explanation of Color Television SystemNTSC: National Television System  Committee, color television 
telecasting specifications 
adopted mainly in the U.S.A., 
Canada and Japan.
PAL: Phase Alternation by Line, a  color television system ad-
opted mainly by European 
countries and China.
■  Exif Print (Exif ver. 2.3)
Exif Print Format is a newly revised 
digital camera file format that con-
tains a variety of shooting informa-
tion for optimal printing.
 IMPORTANT NOTICE: Read Before  Using the Software
Direct or indirect export, in whole or 
in part, of licensed software without 
the permission of the applicable 
governing bodies is prohibited. 
						

							ix
For Your Safety
IMPORTANT: Read the following notices before using the camera’s built-in 
wireless transmitter.
c
This product, which contains encryption function developed in the United 
States, is controlled by the United States Export Administration Regula-
tions and may not be exported or re-exported to any country to which the 
United States embargoes goods.
•  Use only as part of a wireless network.  FUJIFILM does not accept liability for  damages resulting from unauthorized use.  Do not use in applications 
requiring a high degree of reliability, for example in medical devices or 
other systems that may directly or indirectly impact human life.  When 
using the device in computer and other systems that demand a greater 
degree of reliability than wireless networks, be sure to take all necessary 
precautions to ensure safety and prevent malfunction.
•  Use only in the country in which the device was purchased.  This device con- forms to regulations governing wireless network devices in the country 
in which it was purchased.  Observe all location regulations when using 
the device.  FUJIFILM does not accept liability for problems arising from 
use in other jurisdictions.
•  Wireless data (images) may be intercepted by third parties.  T he se curit y of data  transmitted over wireless networks is not guaranteed.
•  Do not use the device in locations subject to magnetic fields, static electricity, or  radio interference.   Do not use the transmitter in the vicinity of microwave 
ovens or in other locations subject to magnetic fields, static electricity, 
or radio interference that may prevent reception of wireless signals.  Mu-
tual interference may occur when the transmitter is used in the vicinity of 
other wireless devices operating in the 2.4 GHz band.
•  The wireless transmitter operates in the 2.4 GHz band using DSSS and OFDM modu- lation. Wireless Network Devices: Cautions•  This device operates on the same frequency as commercial, educational, and medi-cal devices and wireless transmitters.  It also operates on the same frequency 
as licensed transmitters and special unlicensed low-voltage transmitters 
used in RFID tracking systems for assembly lines and in other similar ap-
plications.
•  To prevent interference with the above devices, observe the following precau- tions.   Confirm that the RFID transmitter is not in operation before using 
this device.  Should you observe that the device causes interference in 
licensed transmitters used for RFID tracking, immediately choose a new 
operating frequency for this device to prevent additional interference.  If 
you notice that this device causes interference in low-voltage RFID trac-
ing systems, contact a FUJIFILM representative. 
						

							x
About This Manual
Before using the camera, read this manual and the warnings on pages ii–ix.  For information on specific 
topics, consult the sources below.
 Memory Cards
Pictures can be stored in an optional SD, SDHC, and SDXC memory cards ( P 11), referred to in this manual as 
“memory cards”.
  Temperature Warning
The camera will turn off automatically before its temperature or the temperature of the battery rise above safe 
limits.  Pictures taken when a temperature warning is di splayed may exhibit higher levels of “noise” (mottling). 
Turn the camera off and wait for it to cool before turning it on again.
✔✔ Warning Messages and Displays Warning Messages and Displays ..................... .....................P P 126126
Find out what’s behind that flashing icon or error 
message in the display.
✔✔ Troubleshooting Troubleshooting ............................................ ............................................P P 118118
Having a specific problem with the camera?  Find 
the answer here.✔✔ Table of Contents Table of Contents .............................................. ..............................................P P xixi
The “Table of Contents” gives an overview of the 
entire manual.  The principal camera operations 
are listed here.