Fujifilm Camera Finepix F850 Exr Owners Manual
Have a look at the manual Fujifilm Camera Finepix F850 Exr Owners Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 17 Fujifilm manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
37More on Photography d d Exposure Compensation Exposure Compensation To adjust exposure compensation when photographing very bright, very dark, or high-contrast subjects, press the selector up (d). Press the selector up or down or use the command dial to choose an exposure compen- sation value and then press MENU/OK. Choose positive (+) values to increase exposure Choose negative (–) values to reduce exposure R A d icon and exposure indicator are displayed at settings other than ±0. Exposure compensation is not reset when the camera is turned off ; to restore normal expo- sure control, choose a value of ±0. R Turn the fl ash off when using exposure compensation.
38More on Photography F F Macro Mode (Close-ups) Macro Mode (Close-ups) For close-ups, press the selector left (F) and select F. Use the zoom control to compose pictures (P 19). To exit macro mode, press the selector left (F) and select OFF. MACROOFF P Close-up shots R Use of a tripod is recommended to prevent blur caused by camera shake. R The shadow cast by the lens may appear in photographs taken with the fl ash at very short ranges. Zoom out or increase the distance to the subject.
39More on Photography N N Using the Flash (Super-Intelligent Flash) Using the Flash (Super-Intelligent Flash) When the fl ash is used, the camera’s Super-Intelligent Flash system instantly analyzes the scene based on such factors as the brightness of the subject, its position in the frame, and its distance from the camera. Flash output and sensitivity are adjusted to ensure that the main subject is correctly exposed while preserving the eff ects of ambient background lighting, even in dimly-lit indoor scenes. Use the fl ash when lighting is poor, for example when shoot- ing at night or indoors under low light. 1 Press the fl ash pop-up button to raise the fl ash. 2 Press the selector right (N) and choose from the fol- lowing fl ash modes: OptionOptionDescriptionDescription AUTOAUTO//KK *The fl ash fi res when required. Recommended in most situations. NN//LL *The fl ash fi res whenever a picture is taken. Use for backlit subjects or for natural coloration when shooting in bright light. OO//MM *Capture both the main subject and the background under low light (note that brightly lit scenes may be overexposed). AUTO FLASH According to shooting conditions P * J icon indicates that Intelligent Face Detection and red-eye removal are on and will be used to minimize “red-eye” caused by the fl ash refl ecting from the retinas of portrait subjects.
40More on Photography N Using the Flash (Super-Intelligent Flash) R Changing the angle of the fl ash turns the fl ash off . R Lower the fl ash where fl ash photography is prohibited or to capture natural lighting under dim light. We also recommend that you lower the fl ash when the camera is off . R If the fl ash will fi re, p will be displayed when the shutter button is pressed halfway. At slow shutter speeds, k will appear in the display to warn that pictures may be blurred; use of a tripod is recommended. R The fl ash may fi re several times with each shot. Do not move the camera until shooting is complete. R The fl ash may cause vignetting.
41More on Photography h h Using the Self-Timer Using the Self-Timer To use the self-timer, press the selector down (h) and choose from the following options: OFF OFF P OptionOptionDescriptionDescription T ( OFF) Self-timer off . o ( AUTO RELEASE) The shutter is released automatically when the camera detects a human portrait subject facing the camera. Use for portraits of babies. S ( 10 SEC) The shutter is released ten seconds after the shutter button is pressed. Use for self-portraits. The self-timer lamp on the front of the camera lights when the timer starts and begins to blink shortly before the photo is taken. R ( 2 SEC) The shutter is released two seconds after the shutter button is pressed. Use to reduce blur caused by the camera moving when the shutter button is pressed. The self-timer lamp will blink as the timer counts down.
42More on Photography The Fn Button The Fn Button The role played by the Fn button can be select- ed using the F Fn BUTTON option (P 80). The following options are available: ISO (P 74)/IMAGE SIZE (P 75)/IMAGE QUALITY (P 76)/ DYNAMIC RANGE (P 76)/FILM SIMULATION (P 77)/ PHOTOMETRY (P 79)/FOCUS MODE (P 80)/FACE DETECTION (P 49) R The F Fn BUTTON menu can also be displayed by pressing and holding the Fn button.
43More on Photography The E-Fn Button The E-Fn Button Press the E-Fn button to use the E-Fn (extended function) menu. BACKE-Fn E-Fn The each role played by the a button, the F button and the selector up, down, left and right can be used in the E-Fn menu. R Press the E-Fn button again to return to shooting mode. ■ Using the E-Fn BUTTON CUSTOM SETTING Menu The following options are available: ISO (P 74)/IMAGE SIZE (P 75)/IMAGE QUALITY (P 76)/ DYNAMIC RANGE (P 76)/FILM SIMULATION (P 77)/ WHITE BALANCE (P 78)/CONTINUOUS (P 45)/PHOTOMETRY (P 79)/ FOCUS MODE (P 80)/FACE DETECTION (P 49)/ INTELLIGENT DIGITAL ZOOM (P 97) 1 Select f E-Fn BUTTON CUSTOM SETTING in the shooting menu. The f E-Fn BUTTON CUSTOM SET- TING menu is displayed. SET E-Fn BUTTON CUSTOM SETTING PRESS THE BUTTONTO CHANGE THE FUNCTION.
44More on Photography The E-Fn Button 2 Press the button to adjust.E-Fn BUTTON CUSTOM SETTINGBISO IMAGE SIZE IMAGE QUALITY DYNAMIC RANGE FILM SIMULATION WHITE BALANCE CONTINUOUS 3 Highlight items and press the selector up or down to view options, then highlight an option and press MENU/OK.
45More on Photography RR Continuous Shooting Continuous Shooting To capture motion in a series of pictures, press MENU/OK, select R CONTINUOUS in the shooting menu (P 79), and choose from the options listed in this section. STILL IMAGE OptionOptionPP BB STILL IMAGE STILL IMAGE—— II TOP TOP nn4646 PP BEST FRAME CAPTURE BEST FRAME CAPTURE4646 OO AE BKT AE BKT4848 XX FILM SIMULATION BKT FILM SIMULATION BKT4848 YY DYNAMIC RANGE BKT DYNAMIC RANGE BKT4848 R The fl ash turns off automatically. The previously selected fl ash mode is restored when B is selected for R CONTINUOUS. R Frame rate varies with shutter speed. R Focus and exposure are determined by the fi rst frame in each series. R The number of pictures that can be taken in a single burst varies with the scene and camera settings. The number of pictures that can be recorded depends on the memory available.
46More on Photography R Continuous Shooting ■ I TOP n The camera takes photographs while the shutter button is pressed. To choose the frame rate: Press the selector left or right to choose a frame rate and press MENU/OK to select and return to shooting mode. 3.0fps ■ P BEST FRAME CAPTURE The camera takes a series of pictures, starting before and ending after the shutter button is pressed. 1 Press the selector right when the camera is in shooting mode. 2 Highlight the current frame rate and press the selector right, then press selector up or down to choose a new value and press MENU/OK to select. Q Some frame rates may reduce the number of shots available.