Fujifilm 35mm Compact Camera Dl-270 Zoom Owners Manual

-(t
(5zut
drop the film in smoothly and surely.o Be sure to use 35 mm DX roll film (film markedDX on the box and cartridge).o Always use your film before the expiration dateprinted on the film box.
3. Check the film tip position (Fig. 7)Make sure the film tip falls within the Film Tip Mark(green lines in the far end of the film track).
4. Close the camera back (Fig. 8)As soon as you close the Camera Back, theExposure Counter will run through rapidly and thefilm will prewind itself up to the very end. (lf...

area enclosed by the hyphenated lines). However,when composing your picture, always leave aslight margin on all sides of the framing area.o To save battery power, the red P in the Finderwill automatically turn off if the shutter is notreleased or the zoom buttons are not used within30 seconds.Before taking your panorama picture, be sure toturn on the red P again by pressing the ShutterRelease about halfway down.
5. Switching back to 35 mm full size mode (Fig.13)To switch back to the standard mode, turn...

-o
(,zUJ
Aim the Autofocus Spot at your subject. Make sureyour subject fills the Finders Autofocus Spotcompletely.
10. Press the shutter release about halfway down(Fis. 18)lf the Autofocus Lamp (green lamp next to theFinder Eyepiece) turns on and glows when theShutter Release is pressed about halfway down,the Lens has completed focusing. But if you aretoo close to your subject, the Autofocus Lamp willblink to warn you to move back.r The Autofocus Lamp will blink if you are tooclose to your subject. lf it...

bered frame, and rewind each frame into itscartridge as soon as it is exposed.. You can unload the film as soon as the last frame(frame No. 1) is exposed and the camera motorcomes to a halt because there is no need torewind it.
1. After exposing the last frame (Fig. 20)As soon as the last frame (frame No. 1) is exposed,the Exposure Counter will switch from 0 to E
and the camera motor will come to a halt.
2. Unload the exposed film (Fig. 21)Make sure the Exposure Counter is showing theE sign then open the...

9,
ozUJ
2. Panorama and standardformat mixed rollAlways attach the PANO-
RAMA + STANDARD seal tothe film cartridge.
r lf you print your panorama format exposuresin the standard size, the result will be lessthan satisfactory because a black band willappear in the upper and lower parts of thepicture area or the picture may turn outwhitish.
II. ADVANCED TECHNIOUES
USING THE AUTOFOCUS LOCK
1. This is the picture you wanl but.. . . (Fig. 23)the Autofocus Spot is off your subject. lt means theLens is not...

rso 1m$oeo.CIj$O400,
35#m,#id$angtd0.9-5o.9 -70.9-10
70 mm telephoto0.65-2.51.65-3.50.65-5
and the lens focal length as shown below.Reducing Lamp turns on then turn off the instantthe Flash fires. Be sure to hold the camera stillwhile the Autofocus Lamp is on.
I A word on red-eye effectWhen you photograph a persons face in dim lightwith Flash, the eyes will sometimes turn out red inthe picture. This is because the light from the Flashenters the persons eyes and is reflected back intothe camera lens. To...

Eo
(JzlU
Taking non-flash pictures4. Flash olf mode (Fig. 28)Bring out the Flash Off Sign ( O ) in the LCD bypressing in the Exposure Mode Button, then takeyour non-flash (existing light) picture.o The flash mode settings will remain on until youswitch them off by closing the Lens Cover.o To take stage scenes and indoor sports eventsthat are beyond reach of the cameras built-inflash, shoot with the Flash turned off (flash offmode).o When shooting in the flash off mode, keep thecamera as still as possible...

1. Take out the remote control switch (Fig. 32)To take it out of its holder, just slide it out. To insertit in its holder, slide it in until it stops with a click.. Switch Holder (Fig. 32-A)
2. Set the camera to remote control (Fig. 33)Press in the Selttimer/Remote Control ModeButton ( (tro U ) to bring out the triangular mark( { ) in the LCD in the spot where the RemoteControl Sign ( tr- ) is showing.
3. Take your remote control picture (Fig. 3a)Aim the Autofocus Spot at your subject and com-pose your...

to
(ttltJ
CAMERA FAULTS, POSSIBLE CAUSES, AND REMEDIES
Fettli$,Fssdbft-Cau$€$He iegPagii
The shutter wonttrip.@ The battery is nearly spent.(The Autofocus Lamp doesnot turn on when the ShutterRelease is pressed halfwaydown).@ You forgot to turn on thePower Switch.
@ The Exposure Counter isshowing the E Sign.@ You blocked the Lens barrelwhile it was zooming, inwhich case the shutter wonttrip because the Lens is not innormal position.
@ Change the battery withnew one.
@ Push down the Lens CoverButton and...

FaulltPossiHe Causes,RemediesPqge
2. The Exposure Count-er blinks. (The filmwinds directly backinto its cartridge themoment it is loaded).
. A partly used roll of film wasunloaded without winding itback into its cartridge.
o First, move the Lens out intoshooting position by pushingdown the Lens Cover Button.Next, unload the battery, checkto make sure the ExposureCounter in LCD has turned off,then reload the battery.
13
3. The film wound backinto its cartridge inthe middle of the roll.
o While taking...