Fostex Fr2 Memory Recorder Owners Manual
Here you can view all the pages of manual Fostex Fr2 Memory Recorder Owners Manual. The Fostex manuals for Recorder are available online for free. You can easily download all the documents as PDF.
Page 91
![Page 91
91
FR-2 Field Memory Recorder (Chapter 6: MENU mode/Setup menu)
Setting the digital output signal format (Digi Out Type)
1) Use the [MENU] dial to select Setup and press the [ENTER] key.
The display now shows the first page of the Setup menu.
2) Use the [MENU] dial to select DigiOutType on the second page and press the
[ENTER] key.
The current setting (by default, AES/EBU) starts flashing.
: See Checking the remain for recording on page 52 for details about remain
display.
This menu item selects the...](http://img.usermanuals.tech/thumb/1993/84727/w300_fr2_owners_manual_d-90.png "Page 91
91
FR-2 Field Memory Recorder (Chapter 6: MENU mode/Setup menu)
Setting the digital output signal format (Digi Out Type)
1) Use the [MENU] dial to select Setup and press the [ENTER] key.
The display now shows the first page of the Setup menu.
2) Use the [MENU] dial to select DigiOutType on the second page and press the
[ENTER] key.
The current setting (by default, AES/EBU) starts flashing.
: See Checking the remain for recording on page 52 for details about remain
display.
This menu item selects the...")
91 FR-2 Field Memory Recorder (Chapter 6: MENU mode/Setup menu) Setting the digital output signal format (Digi Out Type) 1) Use the [MENU] dial to select Setup and press the [ENTER] key. The display now shows the first page of the Setup menu. 2) Use the [MENU] dial to select DigiOutType on the second page and press the [ENTER] key. The current setting (by default, AES/EBU) starts flashing. : See Checking the remain for recording on page 52 for details about remain display. This menu item selects the...
Page 92
![Page 92
92
FR-2 Field Memory Recorder (Chapter 6: MENU mode/Setup menu)
Selecting the battery type (Battery)
1) Use the [MENU] dial to select Setup and press the [ENTER] key.
The display now shows the first page of the Setup menu.
2) Use the [MENU] dial to select Battery on the second page and press the [ENTER]
key.
The current setting (by default, NiHM) starts flashing.
3) Use the [MENU] dial to select the desired battery type and press the [ENTER] key.
You can select the type from among NiHM (default), NiCd...](http://img.usermanuals.tech/thumb/1993/84727/w300_fr2_owners_manual_d-91.png "Page 92
92
FR-2 Field Memory Recorder (Chapter 6: MENU mode/Setup menu)
Selecting the battery type (Battery)
1) Use the [MENU] dial to select Setup and press the [ENTER] key.
The display now shows the first page of the Setup menu.
2) Use the [MENU] dial to select Battery on the second page and press the [ENTER]
key.
The current setting (by default, NiHM) starts flashing.
3) Use the [MENU] dial to select the desired battery type and press the [ENTER] key.
You can select the type from among NiHM (default), NiCd...")
92 FR-2 Field Memory Recorder (Chapter 6: MENU mode/Setup menu) Selecting the battery type (Battery) 1) Use the [MENU] dial to select Setup and press the [ENTER] key. The display now shows the first page of the Setup menu. 2) Use the [MENU] dial to select Battery on the second page and press the [ENTER] key. The current setting (by default, NiHM) starts flashing. 3) Use the [MENU] dial to select the desired battery type and press the [ENTER] key. You can select the type from among NiHM (default), NiCd...
Page 93
![Page 93
93
FR-2 Field Memory Recorder (Chapter 6: MENU mode/Setup menu)
Selecting the USB keyboard type (Keyboard)
1) Use the [MENU] dial to select Setup and press the [ENTER] key.
The display now shows the first page of the Setup menu.
2) Use the [MENU] dial to select Keyboard on the third page and press the [ENTER]
key.
The current setting (by default, US) starts flashing.
3) Use the [MENU] dial to select the desired keyboard type and press the [ENTER] key.
You can select between US and JAPAN.
By pressing the...](http://img.usermanuals.tech/thumb/1993/84727/w300_fr2_owners_manual_d-92.png "Page 93
93
FR-2 Field Memory Recorder (Chapter 6: MENU mode/Setup menu)
Selecting the USB keyboard type (Keyboard)
1) Use the [MENU] dial to select Setup and press the [ENTER] key.
The display now shows the first page of the Setup menu.
2) Use the [MENU] dial to select Keyboard on the third page and press the [ENTER]
key.
The current setting (by default, US) starts flashing.
3) Use the [MENU] dial to select the desired keyboard type and press the [ENTER] key.
You can select between US and JAPAN.
By pressing the...")
93 FR-2 Field Memory Recorder (Chapter 6: MENU mode/Setup menu) Selecting the USB keyboard type (Keyboard) 1) Use the [MENU] dial to select Setup and press the [ENTER] key. The display now shows the first page of the Setup menu. 2) Use the [MENU] dial to select Keyboard on the third page and press the [ENTER] key. The current setting (by default, US) starts flashing. 3) Use the [MENU] dial to select the desired keyboard type and press the [ENTER] key. You can select between US and JAPAN. By pressing the...
Page 94
![Page 94
94
FR-2 Field Memory Recorder (Chapter 6: MENU mode/Setup menu)
Viewing the ROM version (Version)
1) Use the [MENU] dial to select Setup and press the [ENTER] key.
The display now shows the first page of the Setup menu.
2) Use the [MENU] dial to select Version on the third page and press the [ENTER] key.
The current version of the ROM installed to the unit is displayed.
3) To dismiss the ROM version screen, press the [ENTER] key.
4) Press the [HOME] key to exit the MENU mode.
This menu item is used for...](http://img.usermanuals.tech/thumb/1993/84727/w300_fr2_owners_manual_d-93.png "Page 94
94
FR-2 Field Memory Recorder (Chapter 6: MENU mode/Setup menu)
Viewing the ROM version (Version)
1) Use the [MENU] dial to select Setup and press the [ENTER] key.
The display now shows the first page of the Setup menu.
2) Use the [MENU] dial to select Version on the third page and press the [ENTER] key.
The current version of the ROM installed to the unit is displayed.
3) To dismiss the ROM version screen, press the [ENTER] key.
4) Press the [HOME] key to exit the MENU mode.
This menu item is used for...")
94 FR-2 Field Memory Recorder (Chapter 6: MENU mode/Setup menu) Viewing the ROM version (Version) 1) Use the [MENU] dial to select Setup and press the [ENTER] key. The display now shows the first page of the Setup menu. 2) Use the [MENU] dial to select Version on the third page and press the [ENTER] key. The current version of the ROM installed to the unit is displayed. 3) To dismiss the ROM version screen, press the [ENTER] key. 4) Press the [HOME] key to exit the MENU mode. This menu item is used for...
Page 95
![Page 95
95
FR-2 Field Memory Recorder (Chapter 6: MENU mode/Setup menu)
Initializing settings of the Setup menu (Init Setup)
1) Use the [MENU] dial to select Setup and press the [ENTER] key.
The display now shows the first page of the Setup menu.
2) Use the [MENU] dial to select Init Setup on the third page and press the [ENTER] key.
The display changes to show the Initialize Setup screen as shown below right, in which Are
you sure? flashes.
3) To executing initializing, press the [ENTER] key.
The settings are...](http://img.usermanuals.tech/thumb/1993/84727/w300_fr2_owners_manual_d-94.png "Page 95
95
FR-2 Field Memory Recorder (Chapter 6: MENU mode/Setup menu)
Initializing settings of the Setup menu (Init Setup)
1) Use the [MENU] dial to select Setup and press the [ENTER] key.
The display now shows the first page of the Setup menu.
2) Use the [MENU] dial to select Init Setup on the third page and press the [ENTER] key.
The display changes to show the Initialize Setup screen as shown below right, in which Are
you sure? flashes.
3) To executing initializing, press the [ENTER] key.
The settings are...")
95 FR-2 Field Memory Recorder (Chapter 6: MENU mode/Setup menu) Initializing settings of the Setup menu (Init Setup) 1) Use the [MENU] dial to select Setup and press the [ENTER] key. The display now shows the first page of the Setup menu. 2) Use the [MENU] dial to select Init Setup on the third page and press the [ENTER] key. The display changes to show the Initialize Setup screen as shown below right, in which Are you sure? flashes. 3) To executing initializing, press the [ENTER] key. The settings are...
Page 96
![Page 96
96
FR-2 Field Memory Recorder (Chapter 6: MENU mode/Setup menu)
When a USB keyboard is connected to the FR-2, you can carry out the following operation.
Acts the same as the [MENU] dial on the FR-2 panel.
Returns to the previous screen layer.
Enter keyActs the same as the [ENTER] key on the FR-2 panel.
/ keys
key](http://img.usermanuals.tech/thumb/1993/84727/w300_fr2_owners_manual_d-95.png "Page 96
96
FR-2 Field Memory Recorder (Chapter 6: MENU mode/Setup menu)
When a USB keyboard is connected to the FR-2, you can carry out the following operation.
Acts the same as the [MENU] dial on the FR-2 panel.
Returns to the previous screen layer.
Enter keyActs the same as the [ENTER] key on the FR-2 panel.
/ keys
key")
96 FR-2 Field Memory Recorder (Chapter 6: MENU mode/Setup menu) When a USB keyboard is connected to the FR-2, you can carry out the following operation. Acts the same as the [MENU] dial on the FR-2 panel. Returns to the previous screen layer. Enter keyActs the same as the [ENTER] key on the FR-2 panel. / keys key
Page 97
97 FR-2 Field Memory Recorder (Chapter 7: Exporting audio files to a PC) Chapter 7: Exporting audio files to a PC This chapter describes how to export audio files created by the FR-2 to your PC.
Page 98
98 FR-2 Field Memory Recorder (Chapter 7: Exporting audio files to a PC) By connecting the FR-2 to your PC via the USB ports, you can transfer audio (BWF) files created by the FR-2 between your PC and a memory card. FR-2 audio data can be copied to a hard disk on your PC, or exported to a computer application such as Digidesign Pro Tools. Connecting the FR-2 to a PC 12VDC IN32 1 COLDGND HOT KEYBOARD PC ONLY USB ONLY DIGITAL OUT IN When you use the FR-2 with your PC, operate the FR-2 on the AC adaptor in...
Page 99
![Page 99
99
FR-2 Field Memory Recorder (Chapter 7: Exporting audio files to a PC)
Connecting the FR-2 to a PC
1) Turn on the power of both the PC and FR-2.
2) Press the [ENTER] key of the FR-2 to enter the MENU mode.
The display shows the first layer of the MENU mode screen.
3) Use the [MENU] dial to select USB Mode at the bottom and press the [ENTER] key.
The display now shows the USB Mode screen.
You can transfer audio data while this screen is shown.
: While the FR-2 is in the USB mode, all controls (keys,...](http://img.usermanuals.tech/thumb/1993/84727/w300_fr2_owners_manual_d-98.png "Page 99
99
FR-2 Field Memory Recorder (Chapter 7: Exporting audio files to a PC)
Connecting the FR-2 to a PC
1) Turn on the power of both the PC and FR-2.
2) Press the [ENTER] key of the FR-2 to enter the MENU mode.
The display shows the first layer of the MENU mode screen.
3) Use the [MENU] dial to select USB Mode at the bottom and press the [ENTER] key.
The display now shows the USB Mode screen.
You can transfer audio data while this screen is shown.
: While the FR-2 is in the USB mode, all controls (keys,...")
99 FR-2 Field Memory Recorder (Chapter 7: Exporting audio files to a PC) Connecting the FR-2 to a PC 1) Turn on the power of both the PC and FR-2. 2) Press the [ENTER] key of the FR-2 to enter the MENU mode. The display shows the first layer of the MENU mode screen. 3) Use the [MENU] dial to select USB Mode at the bottom and press the [ENTER] key. The display now shows the USB Mode screen. You can transfer audio data while this screen is shown. : While the FR-2 is in the USB mode, all controls (keys,...
Page 100
100 FR-2 Field Memory Recorder (Chapter 7: Exporting audio files to a PC) 4) Select CFC000 or PCM000 on the desktop (see arrow 3 below). The disk volume label in the example below shows a tentative volume label which is given by default. If the tentative (default) volume label of the memory card has been edited using the Volume Label menu item on the Disk menu in the MENU mode, the edited label is shown. Exporting audio data to a computer application (example) 1) Start up Pro Tools on your PC. 2) Click...