Fostex 8347 TC Card For The Model FR-2 Owners Manual
Here you can view all the pages of manual Fostex 8347 TC Card For The Model FR-2 Owners Manual. The Fostex manuals for Recorder are available online for free. You can easily download all the documents as PDF.
Page 11
![Page 11
11
Selecting the generator mode [TC Gen.Mode]
The [TC Gen.Mode] menu item selects the generator mode for time code recording. By default, Free
(Free Run) is selected.
Selecting the time code output source [TC Out]
The TC Out menu item selects the time code output source of the [TIME CODE OUT] connector.
You can select between Repro and GEN (Generator). (The default is Repro.)Use the [MENU] dial to select a desired mode and press the [ENTER] key to confirm your selec-
tion. The following shows the...](http://img.usermanuals.tech/thumb/1993/84715/w300_8347_OM_d-10.png "Page 11
11
Selecting the generator mode [TC Gen.Mode]
The [TC Gen.Mode] menu item selects the generator mode for time code recording. By default, Free
(Free Run) is selected.
Selecting the time code output source [TC Out]
The TC Out menu item selects the time code output source of the [TIME CODE OUT] connector.
You can select between Repro and GEN (Generator). (The default is Repro.)Use the [MENU] dial to select a desired mode and press the [ENTER] key to confirm your selec-
tion. The following shows the...")
11 Selecting the generator mode [TC Gen.Mode] The [TC Gen.Mode] menu item selects the generator mode for time code recording. By default, Free (Free Run) is selected. Selecting the time code output source [TC Out] The TC Out menu item selects the time code output source of the [TIME CODE OUT] connector. You can select between Repro and GEN (Generator). (The default is Repro.)Use the [MENU] dial to select a desired mode and press the [ENTER] key to confirm your selec- tion. The following shows the...
Page 12
![Page 12
12
Viewing and editing time code of the internal TC generator [Set Gen.TC]
The [Set Gen.TC] menu item allows you to view the internal TC generator time code value, as well as
edit the time code value to a desired value while the generator mode is set to Free Run or Rec
Run.(While the generator mode is set to 24H or EXT, you can only view time code.)
The internal generator time code runs in realtime.
--h--m--s--f is shown. This means, when recording starts, the next time code
value to the time code value...](http://img.usermanuals.tech/thumb/1993/84715/w300_8347_OM_d-11.png "Page 12
12
Viewing and editing time code of the internal TC generator [Set Gen.TC]
The [Set Gen.TC] menu item allows you to view the internal TC generator time code value, as well as
edit the time code value to a desired value while the generator mode is set to Free Run or Rec
Run.(While the generator mode is set to 24H or EXT, you can only view time code.)
The internal generator time code runs in realtime.
--h--m--s--f is shown. This means, when recording starts, the next time code
value to the time code value...")
12 Viewing and editing time code of the internal TC generator [Set Gen.TC] The [Set Gen.TC] menu item allows you to view the internal TC generator time code value, as well as edit the time code value to a desired value while the generator mode is set to Free Run or Rec Run.(While the generator mode is set to 24H or EXT, you can only view time code.) The internal generator time code runs in realtime. --h--m--s--f is shown. This means, when recording starts, the next time code value to the time code value...
Page 13
![Page 13
13
¥ Editing to a desired time code value:
While Edit> is selected by using the [MENU] dial, pressing the [ENTER] key immediately hold
the current time code value and the h field starts flashing.
You can edit the flashing field using the [MENU] dial. After editing the field, pressing the [EN-
TER] key moves the flashing field to the right. You can also move the flashing field to the right
by using the [>>|] key. You can edit a field value from left to right (h -> m -> s -> f).
When you move the flashing...](http://img.usermanuals.tech/thumb/1993/84715/w300_8347_OM_d-12.png "Page 13
13
¥ Editing to a desired time code value:
While Edit> is selected by using the [MENU] dial, pressing the [ENTER] key immediately hold
the current time code value and the h field starts flashing.
You can edit the flashing field using the [MENU] dial. After editing the field, pressing the [EN-
TER] key moves the flashing field to the right. You can also move the flashing field to the right
by using the [>>|] key. You can edit a field value from left to right (h -> m -> s -> f).
When you move the flashing...")
13 ¥ Editing to a desired time code value: While Edit> is selected by using the [MENU] dial, pressing the [ENTER] key immediately hold the current time code value and the h field starts flashing. You can edit the flashing field using the [MENU] dial. After editing the field, pressing the [EN- TER] key moves the flashing field to the right. You can also move the flashing field to the right by using the [>>|] key. You can edit a field value from left to right (h -> m -> s -> f). When you move the flashing...
Page 14
![Page 14
14
Setting the time code value for REC RUN
In the Rec Run mode, when you start recording a new audio file, the unit jams the last time code
value of the previous audio file. So time code continues through all successive audio files. The
following describes how to edit the last time code value of the previous audio file. The edited
time value is reflected from the next recording.
¥ Editing the time code value
By using the [MENU] dial to select Edit > and pressing the [ENTER] key, the display shows the...](http://img.usermanuals.tech/thumb/1993/84715/w300_8347_OM_d-13.png "Page 14
14
Setting the time code value for REC RUN
In the Rec Run mode, when you start recording a new audio file, the unit jams the last time code
value of the previous audio file. So time code continues through all successive audio files. The
following describes how to edit the last time code value of the previous audio file. The edited
time value is reflected from the next recording.
¥ Editing the time code value
By using the [MENU] dial to select Edit > and pressing the [ENTER] key, the display shows the...")
14 Setting the time code value for REC RUN In the Rec Run mode, when you start recording a new audio file, the unit jams the last time code value of the previous audio file. So time code continues through all successive audio files. The following describes how to edit the last time code value of the previous audio file. The edited time value is reflected from the next recording. ¥ Editing the time code value By using the [MENU] dial to select Edit > and pressing the [ENTER] key, the display shows the...
Page 15
![Page 15
15
Setting the generator Ubit mode and user data [Set Gen.Ubit]
The Set Gen.Ubit menu item sets the generator TC Ubit mode and user data.
¥ TC Ubit mode setting
Use the [MENU] dial to select Ubit mode and press the [ENTER] key. The current Ubit mode
starts flashing and you can now select the Ubit mode (by default, uuuuuuuu flashes).
You can select the desired Ubit mode from among the following modes. Use the [MENU] key to
select a desired mode and press the [ENTER] to confirm your selection.
uuuuuuuu...](http://img.usermanuals.tech/thumb/1993/84715/w300_8347_OM_d-14.png "Page 15
15
Setting the generator Ubit mode and user data [Set Gen.Ubit]
The Set Gen.Ubit menu item sets the generator TC Ubit mode and user data.
¥ TC Ubit mode setting
Use the [MENU] dial to select Ubit mode and press the [ENTER] key. The current Ubit mode
starts flashing and you can now select the Ubit mode (by default, uuuuuuuu flashes).
You can select the desired Ubit mode from among the following modes. Use the [MENU] key to
select a desired mode and press the [ENTER] to confirm your selection.
uuuuuuuu...")
15 Setting the generator Ubit mode and user data [Set Gen.Ubit] The Set Gen.Ubit menu item sets the generator TC Ubit mode and user data. ¥ TC Ubit mode setting Use the [MENU] dial to select Ubit mode and press the [ENTER] key. The current Ubit mode starts flashing and you can now select the Ubit mode (by default, uuuuuuuu flashes). You can select the desired Ubit mode from among the following modes. Use the [MENU] key to select a desired mode and press the [ENTER] to confirm your selection. uuuuuuuu...
Page 16
![Page 16
16
Selecting the userbit of output TC [TC Ubit]
While the TC Out menu item is set to Repro, the TC Ubit] menu item selects the userbit of time
code fed from the [TIME CODE OUT] connector.
Selecting on/off of TC output while paused [Pause TC]
The Pause TC menu item selects whether time code is output from the [TIME CODE OUT] connector
or not while the FR-2 is stopped or paused. By default, time code is not output while the FR-2 is
stopped or paused.
Use the [MENU] dial to select Off or On and press the...](http://img.usermanuals.tech/thumb/1993/84715/w300_8347_OM_d-15.png "Page 16
16
Selecting the userbit of output TC [TC Ubit]
While the TC Out menu item is set to Repro, the TC Ubit] menu item selects the userbit of time
code fed from the [TIME CODE OUT] connector.
Selecting on/off of TC output while paused [Pause TC]
The Pause TC menu item selects whether time code is output from the [TIME CODE OUT] connector
or not while the FR-2 is stopped or paused. By default, time code is not output while the FR-2 is
stopped or paused.
Use the [MENU] dial to select Off or On and press the...")
16 Selecting the userbit of output TC [TC Ubit] While the TC Out menu item is set to Repro, the TC Ubit] menu item selects the userbit of time code fed from the [TIME CODE OUT] connector. Selecting on/off of TC output while paused [Pause TC] The Pause TC menu item selects whether time code is output from the [TIME CODE OUT] connector or not while the FR-2 is stopped or paused. By default, time code is not output while the FR-2 is stopped or paused. Use the [MENU] dial to select Off or On and press the...
Page 17
![Page 17
17
Selecting the jam mode [JAM Mode]
The [JAM Mode] menu items selects the jam mode when jamming external time code into the internal
time code. By default, both the time value and userbit of the external time code are jammed. How-
ever, you can change this setting to jamming only the time code value or only the userbit.
Setting the pull up/down function [Pull Up/Down]
The Pull Up/Down menu item selects pull up/down setting against the current audio sampling
frequency.
Use the [MENU] dial to select a...](http://img.usermanuals.tech/thumb/1993/84715/w300_8347_OM_d-16.png "Page 17
17
Selecting the jam mode [JAM Mode]
The [JAM Mode] menu items selects the jam mode when jamming external time code into the internal
time code. By default, both the time value and userbit of the external time code are jammed. How-
ever, you can change this setting to jamming only the time code value or only the userbit.
Setting the pull up/down function [Pull Up/Down]
The Pull Up/Down menu item selects pull up/down setting against the current audio sampling
frequency.
Use the [MENU] dial to select a...")
17 Selecting the jam mode [JAM Mode] The [JAM Mode] menu items selects the jam mode when jamming external time code into the internal time code. By default, both the time value and userbit of the external time code are jammed. How- ever, you can change this setting to jamming only the time code value or only the userbit. Setting the pull up/down function [Pull Up/Down] The Pull Up/Down menu item selects pull up/down setting against the current audio sampling frequency. Use the [MENU] dial to select a...
Page 18
![Page 18
18
Setting the next event number [Next Event No]
The Next Event No menu item sets the event number which is given to an audio file when you start
recording a new file. By default, the event number is set to 00000, and the first audio file recorded
has event number 00001. The event number is counted up each time you make recording.
Setting the power off time of the TC card [TC Power Timer]
The TC Power Timer menu item set the automatic power off time of the TC card after turning off the
FR-2 power. By...](http://img.usermanuals.tech/thumb/1993/84715/w300_8347_OM_d-17.png "Page 18
18
Setting the next event number [Next Event No]
The Next Event No menu item sets the event number which is given to an audio file when you start
recording a new file. By default, the event number is set to 00000, and the first audio file recorded
has event number 00001. The event number is counted up each time you make recording.
Setting the power off time of the TC card [TC Power Timer]
The TC Power Timer menu item set the automatic power off time of the TC card after turning off the
FR-2 power. By...")
18 Setting the next event number [Next Event No] The Next Event No menu item sets the event number which is given to an audio file when you start recording a new file. By default, the event number is set to 00000, and the first audio file recorded has event number 00001. The event number is counted up each time you make recording. Setting the power off time of the TC card [TC Power Timer] The TC Power Timer menu item set the automatic power off time of the TC card after turning off the FR-2 power. By...
Page 19
19 Declaration of EC Directive This equipment is compatible with the EMC Directive (89/336/EEC) - Directive on approximation of member nations ordinance concerning the electromagnetic compatibility and with the Low Voltage Directive (73/23/EEC) - Directive on approximation of member nationÕs ordinance concerning electric equipment designed to be used within the specified voltage range. This equipment is compatible only when connected to fostex specified product. FOSTEX DISTRIBUTORS LIST IN EUROPE *...
Page 20
FOSTEX CO. 3-2-35, Musashino, Akishima-shi, Tokyo, Japan 196-0021 FOSTEX AMERICA 15431, Blackburn Ave., Norwalk, CA 90650, U. S. A. © PRINTED IN JAPAN MARCH 2005 8289 618 000 FX (422140)