Home > Forster > Firearms accessories > Forster Stuck Case Remover Instructions Manual

Forster Stuck Case Remover Instructions Manual

Add to Favourites
    Download as PDF

    View the Forster Stuck Case Remover Instructions Manual for free. All the Forster manuals and user’s guides are available for free view without any registration. You can also download the manual as PDF to your computer.

    Overview Comments
    Page 1 All Forster Sizing Dies feature the elevated expander ball. Because of this, it is not possible to raise the decapping rod enough to use an R.C.B.S.-type stuck case remover. Forster engineers have developed a simple, inexpensive stuck case remover that will work on our own sizing dies as well as the R.C.B.S., Pacific, Lee, Lyman, and other standard loading dies. Please see the other side for instructions on how to use the Case Remover. STUCK CASE REMOVER INSTRUCTIONS www.forsterproducts.com Thank you...
    Page 2 Begin by locking the sizing die in the press and removing parts A-10, W-10, and B-10. Figure B shows how the die can be held in the Co-Ax®Press by using a second lock ring under the press frame. All Forster Sizing Dies use the smaller 10 x 32 thread. R.C.B.S. dies use the same thread in calibers .22 to .25 and use the larger 1/4 x 28 thread in cal- ibers 6.5 through .50. Figure A shows the Protective Washer (#013) and Hex Nut (#011) in the proper position. As you thread the Hex Nut (#011) down with your...
    Start reading Forster Stuck Case Remover Instructions Manual

    Related Manuals for Forster Stuck Case Remover Instructions Manual

    All Forster manuals